We don't need to stall and wait after loading the task file and before issuing a command, so don't do it. This shows up on profiles and is not needed. It costs us up to 1mS on a dumb controller. Matches the old IDE behaviour. [Note we are now at 2mS on a dumb controller of what seems to be excess delay and fiddling, 3mS if you are writing ctl] Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx> --- drivers/ata/libata-sff.c | 3 --- drivers/ata/pata_via.c | 2 -- 2 files changed, 0 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index cf0332a..3558ca8 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -579,7 +579,6 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) if (ioaddr->ctl_addr) iowrite8(tf->ctl, ioaddr->ctl_addr); ap->last_ctl = tf->ctl; - ata_wait_idle(ap); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { @@ -615,8 +614,6 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) iowrite8(tf->device, ioaddr->device_addr); VPRINTK("device 0x%X\n", tf->device); } - - ata_wait_idle(ap); } EXPORT_SYMBOL_GPL(ata_sff_tf_load); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 6356377..eccfed2 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -416,8 +416,6 @@ static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) tf->lbam, tf->lbah); } - - ata_wait_idle(ap); } static int via_port_start(struct ata_port *ap) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html