Re: Hotplug issue with Marvell 6121

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/10/10 21:32, Justin Maggard wrote:

It's not the 1.5Gbps that is causing the problem.  It appears to be
the act of changing speeds.  I added "libata.force=3:1.5Gbps" to my
kernel command line, and hotplugs seemed to work fine on that port
(presumably due to the fact that libata EH won't change the link speed
limit if it's already at 1.5Gbps).  The other port on the controller
still had hotplug problems.  So everything seems to be pointing to the
Marvell controller having problems when you change speeds.
...

If it's like their non-AHCI controllers (sata_mv), then the chipset/phy
could be very particular about the sequence/timing used when changing speeds.

-ml
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux