Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/04/2010 08:17 PM, Joe Ceklosky wrote:
What was the final outcome on this issue?

What kernel compile options need to be enabled to allow libata to drive
this device?

Can DMA be enabled on this device?

I have an ss4200 running a custom compiled kernel running Fedora Core 12.

There's no workaround at the moment. The root cause is the BIOS seems to be broken and incorrectly disables the PCI device for the PATA controller when the SATA controller is set to AHCI mode.

A PCI quirk might be doable to forcibly re-enable the PATA controller so that ata_piix can drive it, depending on what exactly the BIOS has done to switch it off..
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux