Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/17/2010 08:56 AM, Bart Hartgers wrote:
> Before only the timings for master were set. Datasheet can be found
> here: ftp://ftp.vtbridge.org/Docs/Storage/DS_VT6421A_100_CCPL.PDF
> Surprisingly, a slave drive works without this patch. According to the
> datasheet, the controller by default derives the DMA mode from the 
> Set Features command issued to a drive. Not sure about the PIO
> timings, though. The real problem is that the timings for the master
> effectively are the ones tuned for the slave. If these support
> different UDMA-settings, there is trouble, especially when the slave
> supports a higher UDMA than the master. 
> 
> Anyhow, using the same mechanism for both master and slave seems like 
> a good idea.
> 
> Signed-off-by: Bart Hartgers <bart.hartgers@xxxxxxxxx>

Acked-by: Tejun Heo <tj@xxxxxxxxxx>

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux