[kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Skrabák,

I'm forwarding your mail to linux-ide where all those issues should be
reported. Also, it would be helpful if you sent the whole dmesg output
of the failing kernel.

Reattaching your files too.

Thanks.

----- Forwarded message from Skrabak Csaba <kekcsibe@xxxxxxxxx> -----

From: Skrabak Csaba <kekcsibe@xxxxxxxxx>
To: Borislav Petkov <petkovbb@xxxxxxxxx>
Date: Fri, 29 Jan 2010 04:27:08 +0100
Subject: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29
Message-ID: <b7a1ac7c1001281927g13323d38tcd71271aee0137ca@xxxxxxxxxxxxxx>

Dear Maintainer,

I have found your e-mail address in the MAINTAINERS file of the linux
kernel 2.6.32.6 source.

I have a problem getting my DVD recorder working. I have been using
2.6.22 with no problem at all. Later I have tried 2.6.29, which
produced funny issues: booting up netinstaller CD worked just fine,
but when coming to loading the drivers, DVD stopped working, so it
could not install the packages. I also tried a Windows XP install CD,
which also booted fine, but after installing, Windows could not use
the drive. I kept on using the old 2.6.22 linux. But the newest
versions of udev and other packages found in Debian unstable
repositories don't seem to be compatible any longer with my old but
working kernel. So I decided to try if the problem has been fixed in
2.6.32.6 and my DVD drive could work again like it does with 2.6.22.
Now I experience the same problems, which in detail are:

Mount outputs attached dvd.txt and does not mount. Gnome also does not
mount CD-ROM Device (shows error message).

Other info from /proc:

tchibo@kazimir:~$ cat /proc/cpuinfo
processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 15
model		: 12
model name	: AMD Athlon(tm) 64 Processor 2800+
stepping	: 0
cpu MHz		: 1808.418
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext
3dnow
bogomips	: 3616.83
clflush size	: 64
cache_alignment	: 64
address sizes	: 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

tchibo@kazimir:~$ cat /proc/modules
udf 61319 0 - Live 0xf807a000
crc_itu_t 953 1 udf, Live 0xf803a000
snd_intel8x0 18955 2 - Live 0xf808c000
snd_ac97_codec 77820 1 snd_intel8x0, Live 0xf8065000
pcspkr 1127 0 - Live 0xf8040000
ac97_bus 658 1 snd_ac97_codec, Live 0xf8037000
tchibo@kazimir:~$ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:08.0
  0170-0177 : pata_amd
01f0-01f7 : 0000:00:08.0
  01f0-01f7 : pata_amd
0290-0297 : pnp 00:03
0376-0376 : 0000:00:08.0
  0376-0376 : pata_amd
03c0-03df : vga+
03f6-03f6 : 0000:00:08.0
  03f6-03f6 : pata_amd
04d0-04d1 : pnp 00:03
0a78-0a7b : pnp 00:03
0b78-0b7b : pnp 00:03
0bbc-0bbf : pnp 00:03
0cf8-0cff : PCI conf1
0e78-0e7b : pnp 00:03
0f78-0f7b : pnp 00:03
0fbc-0fbf : pnp 00:03
4000-407f : pnp 00:00
  4000-4003 : ACPI PM1a_EVT_BLK
  4004-4005 : ACPI PM1a_CNT_BLK
  4008-400b : ACPI PM_TMR
  4020-4027 : ACPI GPE0_BLK
4080-40ff : pnp 00:00
4400-447f : pnp 00:00
4480-44ff : pnp 00:00
  44a0-44af : ACPI GPE1_BLK
4800-487f : pnp 00:00
4880-48ff : pnp 00:00
4c00-4c3f : 0000:00:01.1
4c40-4c7f : 0000:00:01.1
9000-9fff : PCI Bus 0000:01
  9000-90ff : 0000:01:00.0
a000-afff : PCI Bus 0000:02
  a000-a0ff : 0000:02:07.0
    a000-a0ff : 8139too
b400-b407 : 0000:00:05.0
  b400-b407 : forcedeth
b800-b8ff : 0000:00:06.0
  b800-b8ff : NVidia CK8S
bc00-bc7f : 0000:00:06.0
  bc00-bc7f : NVidia CK8S
c800-c81f : 0000:00:01.1
f000-f00f : 0000:00:08.0
  f000-f00f : pata_amd
tchibo@kazimir:~$ cat /proc/iomem
00000000-0000ffff : reserved
00010000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000d4000-000d57ff : Adapter ROM
000d5800-000d7fff : pnp 00:01
000f0000-000fffff : reserved
  000f0000-000fffff : System ROM
00100000-7ffeffff : System RAM
  01000000-013d0869 : Kernel code
  013d086a-015c626b : Kernel data
  01617000-016866b3 : Kernel bss
7fff0000-7fff2fff : ACPI Non-volatile Storage
7fff3000-7fffffff : ACPI Tables
80000000-800fffff : PCI Bus 0000:02
  80000000-8000ffff : 0000:02:07.0
d0000000-dfffffff : PCI Bus 0000:01
  d0000000-d7ffffff : 0000:01:00.0
  d8000000-dfffffff : 0000:01:00.1
e0000000-e7ffffff : 0000:00:00.0
  e0000000-e7ffffff : aperture
e8000000-e9ffffff : PCI Bus 0000:01
  e8000000-e801ffff : 0000:01:00.0
  e9000000-e900ffff : 0000:01:00.1
  e9010000-e901ffff : 0000:01:00.0
ea000000-ebffffff : PCI Bus 0000:02
  eb000000-eb0000ff : 0000:02:07.0
    eb000000-eb0000ff : 8139too
ec000000-ec000fff : 0000:00:05.0
  ec000000-ec000fff : forcedeth
ec001000-ec001fff : 0000:00:06.0
  ec001000-ec001fff : NVidia CK8S
ec003000-ec003fff : 0000:00:02.0
  ec003000-ec003fff : ohci_hcd
ec004000-ec004fff : 0000:00:02.1
  ec004000-ec004fff : ohci_hcd
ec005000-ec0050ff : 0000:00:02.2
  ec005000-ec0050ff : ehci_hcd
fec00000-fec00fff : reserved
  fec00000-fec00fff : pnp 00:01
fee00000-feefffff : reserved
  fee00000-feefffff : pnp 00:01
fefffc00-feffffff : reserved
fff80000-fff80fff : pnp 00:01
fff90000-fffbffff : pnp 00:01
fffed000-fffeffff : pnp 00:01
ffff0000-ffffffff : reserved
  ffff0000-ffffffff : pnp 00:01
tchibo@kazimir:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: SAMSUNG SP0802N  Rev: TK10
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: PIONEER  Model: DVD-RW  DVR-112D Rev: 1.21
  Type:   CD-ROM                           ANSI  SCSI revision: 05

The attached lspci.txt is the output of lspci -vvv, while .config.bak
is the kernel config file I used when compiling. /etc/fstab also in
attachment.

Can it be that my DVD drive has in fact a minor defect, but the old
2.6.22 kernel driver just overlooked that? Were there any changes in
the driver since then that could make the driver pickier? Can I do
something to overcome it (maybe a config parameter, fstab corrections,
udev reconfiguration) or must I wait until a new kernel version comes?

Using web search I found plenty of questions dealing with the same
error message but all they could answer was that the DVD was dead. But
it is definitely not.

Please tell me if you know something that or somebody who could help
me solving my problem.

Thank you for your support.

-- 
Skrabák!

kazimir:~# mount /cdrom
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x5 [current]
sr 1:0:0:0: [sr0] <<vendor>> ASC=0xa8 ASCQ=0x1ASC=0xa8 ASCQ=0x1
sr 1:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
end_request: I/O error, dev sr0, sector 64
Buffer I/O error on device sr0, logical block 8
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x5 [current]
sr 1:0:0:0: [sr0] <<vendor>> ASC=0xa8 ASCQ=0x1ASC=0xa8 ASCQ=0x1
sr 1:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
end_request: I/O error, dev sr0, sector 64
Buffer I/O error on device sr0, logical block 8
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x5 [current]
sr 1:0:0:0: [sr0] <<vendor>> ASC=0xa8 ASCQ=0x1ASC=0xa8 ASCQ=0x1
sr 1:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 10 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x5 [current]
sr 1:0:0:0: [sr0] <<vendor>> ASC=0xa8 ASCQ=0x1ASC=0xa8 ASCQ=0x1
sr 1:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 12 00 00 2e 00
end_request: I/O error, dev sr0, sector 72
Buffer I/O error on device sr0, logical block 9
Buffer I/O error on device sr0, logical block 10
sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x5 [current]
sr 1:0:0:0: [sr0] <<vendor>> ASC=0xa8 ASCQ=0x1ASC=0xa8 ASCQ=0x1
sr 1:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
FAT: unable to read boot sector
mount: nem lehet olvasni a(z) /dev/sr0 szuperblokkját
kazimir:~# sr 1:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:0:0: [sr0] Sense Key : 0x5 [current]
sr 1:0:0:0: [sr0] <<vendor>> ASC=0xa8 ASCQ=0x1ASC=0xa8 ASCQ=0x1
sr 1:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1

tchibo@kazimir:/usr/src/linux-2.6.32.6$ lspci -vvv
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-amd64

00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at c800 [size=32]
	Region 4: I/O ports at 4c00 [size=64]
	Region 5: I/O ports at 4c40 [size=64]
	Capabilities: <access denied>

00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at ec003000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 3
	Region 0: Memory at ec004000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 3
	Region 0: Memory at ec005000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b400 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
	Subsystem: Micro-Star International Co., Ltd. Device 7585
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 7
	Region 0: I/O ports at b800 [size=256]
	Region 1: I/O ports at bc00 [size=128]
	Region 2: Memory at ec001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH

00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
	Subsystem: Micro-Star International Co., Ltd. Device 0300
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at f000 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_amd

00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: e8000000-e9ffffff
	Prefetchable memory behind bridge: d0000000-dfffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: ea000000-ebffffff
	Prefetchable memory behind bridge: 80000000-800fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp

01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited Device 0260
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 9000 [size=256]
	Region 2: Memory at e9010000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
	Capabilities: <access denied>

01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
	Subsystem: PC Partner Limited Device 0261
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at d8000000 (32-bit, prefetchable) [disabled] [size=128M]
	Region 1: Memory at e9000000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: <access denied>

02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at a000 [size=256]
	Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=256]
	[virtual] Expansion ROM at 80000000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: 8139too




----- End forwarded message -----

-- 
Regards/Gruss,
    Boris.

Attachment: config.bak
Description: application/trash

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/sda1       /               ext3    defaults,errors=remount-ro 0       1
/dev/sda5       none            swap    sw              0       0
#/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0
/dev/sdb1       /mnt/rack       auto    defaults,quiet,umask=000,user,noauto    0       0
/dev/sda3       /mnt/id         vfat    defaults,quiet,umask=000        0       0
/dev/sda2       /mnt/linux64    ext3    defaults        0       0
/dev/sda1       /mnt/usb        auto    noauto,user,umask=000   0       0
/dev/sr0	/media/cdrom0	auto	ro,defaults,user,noauto 0 0

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux