From: Meelis Roos <mroos@xxxxxxxx> Date: Sun, 20 Dec 2009 00:23:14 +0200 (EET) > This running on Sun Ultra 5 with CMD646 onboard ide. Not CC:'ing linux-ide on reports like this is a good way for your report to get lost and not looked at in a timely manner, fixed :-) > scsi0 : pata_cmd64x > scsi1 : pata_cmd64x > ata1: PATA max MWDMA2 cmd 0x1fe02c00000 ctl 0x1fe02c00008 bmdma 0x1fe02c00020 irq 14 > ata2: PATA max MWDMA2 cmd 0x1fe02c00010 ctl 0x1fe02c00018 bmdma 0x1fe02c00028 irq 14 > pata_cmd64x: active 10 recovery 10 setup 3. > pata_cmd64x: active 10 recovery 10 setup 3. > PCI: Enabling device: (0000:01:01.1), cmd 2 > sunhme.c:v3.10 August 26, 2008 David S. Miller (davem@xxxxxxxxxxxxx) > eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:f8:c7:72 > mice: PS/2 mouse device common for all mice > ------------[ cut here ]------------ > WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() > Modules linked in: > Call Trace: > [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 > [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 > [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 > [0000000000635b30] ata_exec_internal+0x50/0x80 > [0000000000635ddc] ata_do_dev_read_id+0x1c/0x40 > [0000000000635fb0] ata_dev_read_id+0x1b0/0x5c0 > [00000000006423a8] ata_eh_recover+0x5c8/0x1280 > [0000000000643288] ata_do_eh+0x28/0xa0 > [0000000000643e94] ata_scsi_error+0x374/0x600 > [00000000006221ec] scsi_error_handler+0xcc/0x460 > [000000000046fdc0] kthread+0x60/0x80 > [000000000042b4b0] kernel_thread+0x30/0x60 > [000000000046fd1c] kthreadd+0x9c/0xe0 > ---[ end trace 61a1d617a7f4a94d ]--- > rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0 > TCP cubic registered > NET: Registered protocol family 17 > registered taskstats version 1 > rtc-m48t59 rtc-m48t59.0: setting system clock to 2009-12-19 22:14:41 UTC (1261260881) > ------------[ cut here ]------------ > WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() > Modules linked in: > Call Trace: > [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 > [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 > [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 > [0000000000635b30] ata_exec_internal+0x50/0x80 > [0000000000636e1c] ata_dev_configure+0x63c/0x1780 > [0000000000642604] ata_eh_recover+0x824/0x1280 > [0000000000643288] ata_do_eh+0x28/0xa0 > [0000000000643e94] ata_scsi_error+0x374/0x600 > [00000000006221ec] scsi_error_handler+0xcc/0x460 > [000000000046fdc0] kthread+0x60/0x80 > [000000000042b4b0] kernel_thread+0x30/0x60 > [000000000046fd1c] kthreadd+0x9c/0xe0 > ---[ end trace 61a1d617a7f4a94f ]--- > ata1.00: HPA detected: current 234375000, native 234441648 > ata1.00: ATA-5: WDC WD1200JB-75CRA0, 16.06V16, max UDMA/100 > ata1.00: 234375000 sectors, multi 0: LBA > pata_cmd64x: active 3 recovery 1 setup 1. > pata_cmd64x: active 3 recovery 1 setup 1. > input: Sun Mouse as /devices/root/f005f9c0/f00601b4/f0061504/f0064df4/serio1/input/input0 > ------------[ cut here ]------------ > WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() > Modules linked in: > Call Trace: > [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 > [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 > [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 > [0000000000635b30] ata_exec_internal+0x50/0x80 > [000000000063888c] ata_do_set_mode+0x6cc/0xb00 > [000000000063f164] ata_set_mode+0x144/0x160 > [0000000000642cf4] ata_eh_recover+0xf14/0x1280 > [0000000000643288] ata_do_eh+0x28/0xa0 > [0000000000643e94] ata_scsi_error+0x374/0x600 > [00000000006221ec] scsi_error_handler+0xcc/0x460 > [000000000046fdc0] kthread+0x60/0x80 > [000000000042b4b0] kernel_thread+0x30/0x60 > [000000000046fd1c] kthreadd+0x9c/0xe0 > ---[ end trace 61a1d617a7f4a950 ]--- > ------------[ cut here ]------------ > WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() > Modules linked in: > Call Trace: > [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 > [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 > [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 > [0000000000635b30] ata_exec_internal+0x50/0x80 > [0000000000635ddc] ata_do_dev_read_id+0x1c/0x40 > [0000000000635fb0] ata_dev_read_id+0x1b0/0x5c0 > [00000000006365b0] ata_dev_reread_id+0x30/0x1a0 > [0000000000638004] ata_dev_revalidate+0xa4/0x260 > [00000000006388bc] ata_do_set_mode+0x6fc/0xb00 > [000000000063f164] ata_set_mode+0x144/0x160 > [0000000000642cf4] ata_eh_recover+0xf14/0x1280 > [0000000000643288] ata_do_eh+0x28/0xa0 > [0000000000643e94] ata_scsi_error+0x374/0x600 > [00000000006221ec] scsi_error_handler+0xcc/0x460 > [000000000046fdc0] kthread+0x60/0x80 > [000000000042b4b0] kernel_thread+0x30/0x60 > ---[ end trace 61a1d617a7f4a951 ]--- > ------------[ cut here ]------------ > WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() > Modules linked in: > Call Trace: > [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 > [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 > [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 > [0000000000635b30] ata_exec_internal+0x50/0x80 > [0000000000636e1c] ata_dev_configure+0x63c/0x1780 > [00000000006380d4] ata_dev_revalidate+0x174/0x260 > [00000000006388bc] ata_do_set_mode+0x6fc/0xb00 > [000000000063f164] ata_set_mode+0x144/0x160 > [0000000000642cf4] ata_eh_recover+0xf14/0x1280 > [0000000000643288] ata_do_eh+0x28/0xa0 > [0000000000643e94] ata_scsi_error+0x374/0x600 > [00000000006221ec] scsi_error_handler+0xcc/0x460 > [000000000046fdc0] kthread+0x60/0x80 > [000000000042b4b0] kernel_thread+0x30/0x60 > [000000000046fd1c] kthreadd+0x9c/0xe0 > ---[ end trace 61a1d617a7f4a952 ]--- > ata1.00: configured for MWDMA2 > scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-75C 16.0 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 234375000 512-byte logical blocks: (120 GB/111 GiB) > pata_cmd64x: active 10 recovery 10 setup 3. > pata_cmd64x: active 10 recovery 10 setup 3. > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ------------[ cut here ]------------ > WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() > Modules linked in: > Call Trace: > [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 > [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 > [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 > [0000000000635b30] ata_exec_internal+0x50/0x80 > [0000000000635ddc] ata_do_dev_read_id+0x1c/0x40 > [0000000000635fb0] ata_dev_read_id+0x1b0/0x5c0 > [00000000006423a8] ata_eh_recover+0x5c8/0x1280 > [0000000000643288] ata_do_eh+0x28/0xa0 > [0000000000643e94] ata_scsi_error+0x374/0x600 > [00000000006221ec] scsi_error_handler+0xcc/0x460 > [000000000046fdc0] kthread+0x60/0x80 > [000000000042b4b0] kernel_thread+0x30/0x60 > [000000000046fd1c] kthreadd+0x9c/0xe0 > ---[ end trace 61a1d617a7f4a953 ]--- > ata2.00: ATAPI: CRD-8322B, 1.06, max MWDMA2 > pata_cmd64x: active 3 recovery 1 setup 1. > pata_cmd64x: active 3 recovery 1 setup 1. > sda: > > > and hangs here. > > -- > Meelis Roos (mroos@xxxxxxxx) > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
