[PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/ide/ide-timings.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

Index: b/drivers/ide/ide-timings.c
===================================================================
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -166,12 +166,13 @@ int ide_timing_compute(ide_drive_t *driv
 	if (id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
 		memset(&p, 0, sizeof(p));
 
-		if (speed <= XFER_PIO_2)
-			p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
-		else if ((speed <= XFER_PIO_4) ||
-			 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
-			p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
-		else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+		if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+			if (speed <= XFER_PIO_2)
+				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
+			else if ((speed <= XFER_PIO_4) ||
+				 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
+				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
+		} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
 			p.cycle = id[ATA_ID_EIDE_DMA_MIN];
 
 		ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux