Hi,
Here is another set of PATA support improvements (on top of atang tree).
libata:
- fix handling of PIO timings for Compact Flash devices
- fix various issues for CMD64x chipsets
- fix secondary port support for Efar chipsets
- enable parallel scanning for ATi and Efar chipsets
- improve PIO performance for Cypress and VIA chipsets
- misc fixes/cleanups
IDE:
- fix timings calculations for ALi, CMD64x and Cypress chipsets
- add SATA cable detection support
- fix various issues for VIA chipsets
- add support for VIA VT6415, VT8261 and future chipsets
- fix pair device speed checking for chipsets that need it
- misc fixes/cleanups
The following changes since commit c527cc925f95a839583cd331f24445c6269446c0:
Bartlomiej Zolnierkiewicz (1):
add PATA host controller support for Cirrus Logic's EP93xx CPUs (v2)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bart/misc.git atang-v3.0
Bartlomiej Zolnierkiewicz (64):
libata: fix CFA handling in ide_timing_compute()
pata_ali: documentation fixes
pata_ali: cleanup ali_set_piomode()
pata_amd: remove bogus code from timing_setup()
pata_atiixp: remove superfluous wrapper function
pata_atiixp: add locking for parallel scanning
pata_atiixp: enable parallel scan
pata_cmd64x: fix PIO setup
pata_cmd64x: fix handling of address setup timings
pata_cmd64x: cmd648_bmdma_stop() fix
pata_cmd64x: remove unused definitions
pata_cs5520: convert to use ->init_host method
pata_cs5535: use correct values for PIO1 and PIO2 data timings
pata_cypress: fix PIO timings underclocking
pata_efar: always program master_data before slave_data
pata_efar: fix secondary port support
pata_efar: add locking for parallel scanning
pata_efar: enable parallel scan
pata_serverworks: fix PIO setup for the second channel
pata_serverworks: fix error message
pata_serverworks: cleanup cable detection
pata_via: fix address setup timings underlocking
pata_via: store UDMA masks in via_isa_bridges table
ide: fix for ide_timing quantisation errors
ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
alim15x3: fix PIO timings calculations
alim15x3: add ali_fifo_control() helper
alim15x3: remove superfluous locking from ali_set_pio_mode()
alim15x3: cleanup ali_cable_detect()
amd74xx: don't change UDMA settings when programming PIO timings
cmd64x: fix PIO and MWDMA timings calculations
cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
cy82c693: fix PIO timings calculations
cy82c693: remove stale driver history
opti621: remove stale driver history
pdc202xx_old: add ->init_hwif method
serverworks: cleanup svwks_udma_filter()
serverworks: add missing pci_dev_put() call
via82cxxx: vx855 is a single channel controller
ide: add SATA cable detection support
via82cxxx: fix SATA cable detection
via82cxxx: workaround h/w bugs
via82cxxx: add support for vt8261 and future chips
via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller
via82cxxx: fix UDMA settings programming
ide: add drive->pio_mode field
ide: add drive->dma_mode field
ide: change ->set_pio_mode method parameters
ide: change ->set_dma_mode method parameters
ide-timings: use ->pio_mode value to determine fastest PIO speed
alim15x3: fix handling of address setup timings
alim15x3: fix handling of command timings
alim15x3: fix handling of DMA timings
alim15x3: fix handling of UDMA enable bit
amd74xx: use ->pio_mode value to determine pair device speed
cmd64x: fix handling of address setup timings
cs5535: use ->pio_mode value to determine pair device speed
cs5536: use ->pio_mode value to determine pair device speed
it821x: use ->pio_mode value to determine pair device speed
palm_bk3710: use ->pio_mode value to determine pair device speed
siimage: use ->pio_mode value to determine pair device speed
tx493xide: use ->pio_mode value to determine pair device speed
via82cxxx: use ->pio_mode value to determine pair device speed
ide: make ide_get_best_pio_mode() static
drivers/ata/libata-core.c | 17 ++-
drivers/ata/pata_ali.c | 15 +--
drivers/ata/pata_amd.c | 5 -
drivers/ata/pata_atiixp.c | 58 +++++++-----
drivers/ata/pata_cmd64x.c | 26 +++---
drivers/ata/pata_cs5520.c | 55 +++++-------
drivers/ata/pata_cs5535.c | 2 +-
drivers/ata/pata_cypress.c | 10 +-
drivers/ata/pata_efar.c | 58 +++++++++---
drivers/ata/pata_serverworks.c | 42 ++-------
drivers/ata/pata_via.c | 202 +++++++++++++++++++---------------------
drivers/ide/aec62xx.c | 13 ++-
drivers/ide/ali14xx.c | 3 +-
drivers/ide/alim15x3.c | 171 ++++++++++++++++++----------------
drivers/ide/amd74xx.c | 18 ++--
drivers/ide/at91_ide.c | 5 +-
drivers/ide/atiixp.c | 14 ++-
drivers/ide/au1xxx-ide.c | 9 +-
drivers/ide/cmd640.c | 3 +-
drivers/ide/cmd64x.c | 114 +++++++++--------------
drivers/ide/cs5520.c | 9 +-
drivers/ide/cs5530.c | 13 ++-
drivers/ide/cs5535.c | 14 ++--
drivers/ide/cs5536.c | 16 ++--
drivers/ide/cy82c693.c | 146 +++++------------------------
drivers/ide/dtc2278.c | 4 +-
drivers/ide/hpt366.c | 9 +-
drivers/ide/ht6560b.c | 3 +-
drivers/ide/icside.c | 3 +-
drivers/ide/ide-devsets.c | 6 +-
drivers/ide/ide-iops.c | 2 +-
drivers/ide/ide-probe.c | 2 +
drivers/ide/ide-timings.c | 22 +++--
drivers/ide/ide-xfer-mode.c | 18 ++--
drivers/ide/it8172.c | 14 ++--
drivers/ide/it8213.c | 20 ++--
drivers/ide/it821x.c | 14 ++-
drivers/ide/jmicron.c | 6 +-
drivers/ide/opti621.c | 77 +---------------
drivers/ide/palm_bk3710.c | 12 ++-
drivers/ide/pdc202xx_new.c | 8 +-
drivers/ide/pdc202xx_old.c | 27 +++---
drivers/ide/piix.c | 20 ++--
drivers/ide/pmac.c | 9 +-
drivers/ide/qd65xx.c | 10 +-
drivers/ide/sc1200.c | 8 +-
drivers/ide/scc_pata.c | 12 +-
drivers/ide/serverworks.c | 50 ++++-------
drivers/ide/sgiioc4.c | 2 +-
drivers/ide/siimage.c | 14 ++--
drivers/ide/sis5513.c | 8 +-
drivers/ide/sl82c105.c | 8 +-
drivers/ide/slc90e66.c | 17 ++--
drivers/ide/tc86c001.c | 9 +-
drivers/ide/triflex.c | 10 +-
drivers/ide/tx4938ide.c | 7 +-
drivers/ide/tx4939ide.c | 10 +-
drivers/ide/umc8672.c | 5 +-
drivers/ide/via82cxxx.c | 132 +++++++++++++++++++++-----
include/linux/ide.h | 7 +-
60 files changed, 768 insertions(+), 855 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
