[PATCH 15/64] pata_efar: always program master_data before slave_data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] pata_efar: always program master_data before slave_data

We may need to set SITRE before programming slave_data.

This makes pata_efar match the behavior of IDE slc90e66 host driver
and also libata ata_piix one.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/ata/pata_efar.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Index: b/drivers/ata/pata_efar.c
===================================================================
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -72,8 +72,10 @@ static void efar_set_timings(struct ata_
 			     u8 pio, bool use_mwdma)
 {
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned int is_slave	= (adev->devno != 0);
 	u8 master_port		= ap->port_no ? 0x42 : 0x40;
 	u16 master_data;
+	u8 slave_data;
 	int control = 0;
 
 	/*
@@ -104,14 +106,13 @@ static void efar_set_timings(struct ata_
 	pci_read_config_word(dev, master_port, &master_data);
 
 	/* Set PPE, IE, and TIME as appropriate */
-	if (adev->devno == 0) {
+	if (is_slave == 0) {
 		master_data &= 0xCCF0;
 		master_data |= control;
 		master_data |= (timings[pio][0] << 12) |
 			(timings[pio][1] << 8);
 	} else {
 		int shift = 4 * ap->port_no;
-		u8 slave_data;
 
 		master_data &= 0xFF0F;
 		master_data |= (control << 4);
@@ -120,11 +121,12 @@ static void efar_set_timings(struct ata_
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= ap->port_no ? 0x0F : 0xF0;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;
-		pci_write_config_byte(dev, 0x44, slave_data);
 	}
 
 	master_data |= 0x4000;	/* Ensure SITRE is set */
 	pci_write_config_word(dev, master_port, master_data);
+	if (is_slave)
+		pci_write_config_byte(dev, 0x44, slave_data);
 }
 
 /**
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux