From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] ide: change ->set_dma_mode method parameters
Change ->set_dma_mode method parameters to match ->set_dmamode method
used in struct ata_port_operations.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/aec62xx.c | 10 +++++-----
drivers/ide/alim15x3.c | 6 +++---
drivers/ide/amd74xx.c | 7 ++++---
drivers/ide/atiixp.c | 7 ++++---
drivers/ide/au1xxx-ide.c | 4 ++--
drivers/ide/cmd64x.c | 4 ++--
drivers/ide/cs5520.c | 4 ++--
drivers/ide/cs5530.c | 6 +++---
drivers/ide/cs5535.c | 6 +++---
drivers/ide/cs5536.c | 7 ++++---
drivers/ide/cy82c693.c | 4 ++--
drivers/ide/hpt366.c | 7 ++++---
drivers/ide/icside.c | 3 ++-
drivers/ide/ide-xfer-mode.c | 4 ++--
drivers/ide/it8172.c | 4 ++--
drivers/ide/it8213.c | 6 +++---
drivers/ide/it821x.c | 6 ++++--
drivers/ide/jmicron.c | 4 ++--
drivers/ide/palm_bk3710.c | 5 +++--
drivers/ide/pdc202xx_new.c | 4 ++--
drivers/ide/pdc202xx_old.c | 7 ++++---
drivers/ide/piix.c | 6 +++---
drivers/ide/pmac.c | 4 ++--
drivers/ide/sc1200.c | 4 ++--
drivers/ide/scc_pata.c | 6 +++---
drivers/ide/serverworks.c | 4 ++--
drivers/ide/sgiioc4.c | 2 +-
drivers/ide/siimage.c | 6 +++---
drivers/ide/sis5513.c | 4 +++-
drivers/ide/sl82c105.c | 3 ++-
drivers/ide/slc90e66.c | 4 ++--
drivers/ide/tc86c001.c | 7 ++++---
drivers/ide/triflex.c | 8 ++++----
drivers/ide/tx4939ide.c | 4 ++--
drivers/ide/via82cxxx.c | 9 +++++----
include/linux/ide.h | 2 +-
36 files changed, 101 insertions(+), 87 deletions(-)
Index: b/drivers/ide/aec62xx.c
===================================================================
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -81,15 +81,15 @@ static u8 pci_bus_clock_list_ultra (u8 s
return chipset_table->ultra_settings;
}
-static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
+static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
u16 d_conf = 0;
u8 ultra = 0, ultra_conf = 0;
u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
+ const u8 speed = drive->dma_mode;
unsigned long flags;
local_irq_save(flags);
@@ -109,15 +109,15 @@ static void aec6210_set_mode(ide_drive_t
local_irq_restore(flags);
}
-static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
+static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
u8 unit = drive->dn & 1;
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
+ const u8 speed = drive->dma_mode;
unsigned long flags;
local_irq_save(flags);
@@ -137,7 +137,7 @@ static void aec6260_set_mode(ide_drive_t
static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
drive->dma_mode = drive->pio_mode;
- hwif->port_ops->set_dma_mode(drive, drive->dma_mode);
+ hwif->port_ops->set_dma_mode(hwif, drive);
}
static int init_chipset_aec62xx(struct pci_dev *dev)
Index: b/drivers/ide/alim15x3.c
===================================================================
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -132,16 +132,16 @@ static u8 ali_udma_filter(ide_drive_t *d
/**
* ali_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Configure the hardware for the desired IDE transfer mode.
*/
-static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
+ const u8 speed = drive->dma_mode;
u8 speed1 = speed;
u8 unit = drive->dn & 1;
u8 tmpbyte = 0x00;
Index: b/drivers/ide/amd74xx.c
===================================================================
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -79,14 +79,14 @@ static void amd_set_speed(struct pci_dev
* to a desired transfer mode. It also can be called by upper layers.
*/
-static void amd_set_drive(ide_drive_t *drive, const u8 speed)
+static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *peer = ide_get_pair_dev(drive);
struct ide_timing t, p;
int T, UT;
u8 udma_mask = hwif->ultra_mask;
+ const u8 speed = drive->dma_mode;
T = 1000000000 / amd_clock;
UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
@@ -110,7 +110,8 @@ static void amd_set_drive(ide_drive_t *d
static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- amd_set_drive(drive, drive->pio_mode);
+ drive->dma_mode = drive->pio_mode;
+ amd_set_drive(hwif, drive);
}
static void amd7409_cable_detect(struct pci_dev *dev)
Index: b/drivers/ide/atiixp.c
===================================================================
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -75,21 +75,22 @@ static void atiixp_set_pio_mode(ide_hwif
/**
* atiixp_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Set a ATIIXP host controller to the desired DMA mode. This involves
* programming the right timing data into the PCI configuration space.
*/
-static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long flags;
int timing_shift = (drive->dn ^ 1) * 8;
u32 tmp32;
u16 tmp16;
u16 udma_ctl = 0;
+ const u8 speed = drive->dma_mode;
spin_lock_irqsave(&atiixp_lock, flags);
Index: b/drivers/ide/au1xxx-ide.c
===================================================================
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -160,11 +160,11 @@ static void au1xxx_set_pio_mode(ide_hwif
au_writel(mem_stcfg,MEM_STCFG2);
}
-static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
- switch(speed) {
+ switch (drive->dma_mode) {
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
case XFER_MW_DMA_2:
mem_sttime = SBC_IDE_TIMING(MDMA2);
Index: b/drivers/ide/cmd64x.c
===================================================================
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -167,12 +167,12 @@ static void cmd64x_set_pio_mode(ide_hwif
cmd64x_tune_pio(drive, pio);
}
-static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = drive->dn & 0x01;
u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
+ const u8 speed = drive->dma_mode;
pci_read_config_byte(dev, pciU, ®U);
regU &= ~(unit ? 0xCA : 0x35);
Index: b/drivers/ide/cs5520.c
===================================================================
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -81,12 +81,12 @@ static void cs5520_set_pio_mode(ide_hwif
(cs5520_pio_clocks[pio].assert));
}
-static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
printk(KERN_ERR "cs55x0: bad ide timing.\n");
drive->pio_mode = XFER_PIO_0 + 0;
- cs5520_set_pio_mode(drive->hwif, drive);
+ cs5520_set_pio_mode(hwif, drive);
}
static const struct ide_port_ops cs5520_port_ops = {
Index: b/drivers/ide/cs5530.c
===================================================================
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -100,12 +100,12 @@ out:
return mask;
}
-static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
unsigned long basereg;
unsigned int reg, timings = 0;
- switch (mode) {
+ switch (drive->dma_mode) {
case XFER_UDMA_0: timings = 0x00921250; break;
case XFER_UDMA_1: timings = 0x00911140; break;
case XFER_UDMA_2: timings = 0x00911030; break;
@@ -113,7 +113,7 @@ static void cs5530_set_dma_mode(ide_driv
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
}
- basereg = CS5530_BASEREG(drive->hwif);
+ basereg = CS5530_BASEREG(hwif);
reg = inl(basereg + 4); /* get drive0 config register */
timings |= reg & 0x80000000; /* preserve PIO format bit */
if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
Index: b/drivers/ide/cs5535.c
===================================================================
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -129,15 +129,15 @@ static void cs5535_set_speed(ide_drive_t
/**
* cs5535_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Programs the chipset for DMA mode.
*/
-static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- cs5535_set_speed(drive, speed);
+ cs5535_set_speed(drive, drive->dma_mode);
}
/**
Index: b/drivers/ide/cs5536.c
===================================================================
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -173,11 +173,11 @@ static void cs5536_set_pio_mode(ide_hwif
/**
* cs5536_set_dma_mode - DMA timing setup
+ * @hwif: ATA port
* @drive: ATA device
- * @mode: DMA mode
*/
-static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
static const u8 udma_timings[6] = {
0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
@@ -187,10 +187,11 @@ static void cs5536_set_dma_mode(ide_driv
0x67, 0x21, 0x20,
};
- struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
unsigned long timings = (unsigned long)ide_get_drivedata(drive);
u32 etc;
+ const u8 mode = drive->dma_mode;
cs5536_read(pdev, ETC, &etc);
Index: b/drivers/ide/cy82c693.c
===================================================================
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -52,9 +52,9 @@
* set DMA mode a specific channel for CY82C693
*/
-static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ const u8 mode = drive->dma_mode;
u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
Index: b/drivers/ide/hpt366.c
===================================================================
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -692,14 +692,14 @@ static u32 get_speed_setting(u8 speed, s
return info->timings->clock_table[info->clock][i];
}
-static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
+static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
+ const u8 speed = drive->dma_mode;
u32 new_itr = get_speed_setting(speed, info);
u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
(speed < XFER_UDMA_0 ? t->dma_mask :
@@ -718,7 +718,8 @@ static void hpt3xx_set_mode(ide_drive_t
static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- hpt3xx_set_mode(drive, drive->pio_mode);
+ drive->dma_mode = drive->pio_mode;
+ hpt3xx_set_mode(hwif, drive);
}
static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
Index: b/drivers/ide/icside.c
===================================================================
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -185,10 +185,11 @@ static const expansioncard_ops_t icside_
* MW1 80 50 50 150 C
* MW2 70 25 25 120 C
*/
-static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
+static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
unsigned long cycle_time;
int use_dma_info = 0;
+ const u8 xfer_mode = drive->dma_mode;
switch (xfer_mode) {
case XFER_MW_DMA_2:
Index: b/drivers/ide/ide-xfer-mode.c
===================================================================
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -168,11 +168,11 @@ int ide_set_dma_mode(ide_drive_t *drive,
if (ide_config_drive_speed(drive, mode))
return -1;
drive->dma_mode = mode;
- port_ops->set_dma_mode(drive, mode);
+ port_ops->set_dma_mode(hwif, drive);
return 0;
} else {
drive->dma_mode = mode;
- port_ops->set_dma_mode(drive, mode);
+ port_ops->set_dma_mode(hwif, drive);
return ide_config_drive_speed(drive, mode);
}
}
Index: b/drivers/ide/it8172.c
===================================================================
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -77,14 +77,14 @@ static void it8172_set_pio_mode(ide_hwif
pci_write_config_dword(dev, 0x44, drive_timing);
}
-static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int u_speed = 0;
u8 reg48, reg4a;
+ const u8 speed = drive->dma_mode;
pci_read_config_byte(dev, 0x48, ®48);
pci_read_config_byte(dev, 0x4a, ®4a);
Index: b/drivers/ide/it8213.c
===================================================================
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -74,15 +74,14 @@ static void it8213_set_pio_mode(ide_hwif
/**
* it8213_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Tune the ITE chipset for the DMA mode.
*/
-static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = 0x40;
int a_speed = 3 << (drive->dn * 4);
@@ -92,6 +91,7 @@ static void it8213_set_dma_mode(ide_driv
int u_speed = 0;
u16 reg4042, reg4a;
u8 reg48, reg54, reg55;
+ const u8 speed = drive->dma_mode;
pci_read_config_word(dev, maslave, ®4042);
pci_read_config_byte(dev, 0x48, ®48);
Index: b/drivers/ide/it821x.c
===================================================================
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -393,14 +393,16 @@ static int it821x_dma_end(ide_drive_t *d
/**
* it821x_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Tune the ITE chipset for the desired DMA mode.
*/
-static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
+ const u8 speed = drive->dma_mode;
+
/*
* MWDMA tuning is really hard because our MWDMA and PIO
* timings are kept in the same place. We can switch in the
Index: b/drivers/ide/jmicron.c
===================================================================
--- a/drivers/ide/jmicron.c
+++ b/drivers/ide/jmicron.c
@@ -86,13 +86,13 @@ static void jmicron_set_pio_mode(ide_hwi
/**
* jmicron_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @mode: DMA mode
*
* As the JMicron snoops for timings we don't need to do anything here.
*/
-static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
}
Index: b/drivers/ide/palm_bk3710.c
===================================================================
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -188,10 +188,11 @@ static void palm_bk3710_setpiomode(void
writel(val32, base + BK3710_REGRCVR);
}
-static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
+static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
int is_slave = drive->dn & 1;
- void __iomem *base = (void *)drive->hwif->dma_base;
+ void __iomem *base = (void *)hwif->dma_base;
+ const u8 xferspeed = drive->dma_mode;
if (xferspeed >= XFER_UDMA_0) {
palm_bk3710_setudmamode(base, is_slave,
Index: b/drivers/ide/pdc202xx_new.c
===================================================================
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -129,11 +129,11 @@ static struct udma_timing {
{ 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
};
-static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+ const u8 speed = drive->dma_mode;
/*
* IDE core issues SETFEATURES_XFER to the drive first (thanks to
Index: b/drivers/ide/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -21,11 +21,11 @@
#define DRV_NAME "pdc202xx_old"
-static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
+static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 drive_pci = 0x60 + (drive->dn << 2);
+ const u8 speed = drive->dma_mode;
u8 AP = 0, BP = 0, CP = 0;
u8 TA = 0, TB = 0, TC = 0;
@@ -78,7 +78,8 @@ static void pdc202xx_set_mode(ide_drive_
static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- pdc202xx_set_mode(drive, drive->pio_mode);
+ drive->dma_mode = drive->pio_mode;
+ pdc202xx_set_mode(hwif, drive);
}
static int pdc202xx_test_irq(ide_hwif_t *hwif)
Index: b/drivers/ide/piix.c
===================================================================
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -127,16 +127,15 @@ static void piix_set_pio_mode(ide_hwif_t
/**
* piix_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Set a PIIX host controller to the desired DMA mode. This involves
* programming the right timing data into the PCI configuration space.
*/
-static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int a_speed = 3 << (drive->dn * 4);
@@ -147,6 +146,7 @@ static void piix_set_dma_mode(ide_drive_
int sitre;
u16 reg4042, reg4a;
u8 reg48, reg54, reg55;
+ const u8 speed = drive->dma_mode;
pci_read_config_word(dev, maslave, ®4042);
sitre = (reg4042 & 0x4000) ? 1 : 0;
Index: b/drivers/ide/pmac.c
===================================================================
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -779,14 +779,14 @@ set_timings_mdma(ide_drive_t *drive, int
#endif
}
-static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
int ret = 0;
u32 *timings, *timings2, tl[2];
u8 unit = drive->dn & 1;
+ const u8 speed = drive->dma_mode;
timings = &pmif->timings[unit];
timings2 = &pmif->timings[unit+2];
Index: b/drivers/ide/sc1200.c
===================================================================
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -122,13 +122,13 @@ out:
return mask;
}
-static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int reg, timings;
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
+ const u8 mode = drive->dma_mode;
static const u32 udma_timing[3][3] = {
{ 0x00921250, 0x00911140, 0x00911030 },
Index: b/drivers/ide/scc_pata.c
===================================================================
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -231,16 +231,15 @@ static void scc_set_pio_mode(ide_hwif_t
/**
* scc_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Load the timing settings for this device mode into the
* controller.
*/
-static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct scc_ports *ports = ide_get_hwifdata(hwif);
unsigned long ctl_base = ports->ctl;
unsigned long cckctrl_port = ctl_base + 0xff0;
@@ -254,6 +253,7 @@ static void scc_set_dma_mode(ide_drive_t
int offset, idx;
unsigned long reg;
unsigned long jcactsel;
+ const u8 speed = drive->dma_mode;
reg = in_be32((void __iomem *)cckctrl_port);
if (reg & CCKCTRL_ATACLKOEN) {
Index: b/drivers/ide/serverworks.c
===================================================================
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -128,14 +128,14 @@ static void svwks_set_pio_mode(ide_hwif_
}
}
-static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
+ const u8 speed = drive->dma_mode;
u8 unit = drive->dn & 1;
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
Index: b/drivers/ide/sgiioc4.c
===================================================================
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -255,7 +255,7 @@ static int sgiioc4_dma_end(ide_drive_t *
return dma_stat;
}
-static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
}
Index: b/drivers/ide/siimage.c
===================================================================
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -289,19 +289,18 @@ static void sil_set_pio_mode(ide_hwif_t
/**
* sil_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
* @drive: drive
- * @speed: DMA mode
*
* Tune the SiI chipset for the desired DMA mode.
*/
-static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long base = (unsigned long)hwif->hwif_data;
u16 ultra = 0, multi = 0;
@@ -311,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t
: (mmio ? 0xB4 : 0x80);
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);
+ const u8 speed = drive->dma_mode;
scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
mode = sil_ioread8 (dev, base + addr_mask);
Index: b/drivers/ide/sis5513.c
===================================================================
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -340,8 +340,10 @@ static void sis_program_udma_timings(ide
sis_ata33_program_udma_timings(drive, mode);
}
-static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
+ const u8 speed = drive->dma_mode;
+
if (speed >= XFER_UDMA_0)
sis_program_udma_timings(drive, speed);
else
Index: b/drivers/ide/sl82c105.c
===================================================================
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -92,11 +92,12 @@ static void sl82c105_set_pio_mode(ide_hw
/*
* Configure the chipset for DMA mode.
*/
-static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
unsigned long timings = (unsigned long)ide_get_drivedata(drive);
u16 drv_ctrl;
+ const u8 speed = drive->dma_mode;
drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
Index: b/drivers/ide/slc90e66.c
===================================================================
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -72,14 +72,14 @@ static void slc90e66_set_pio_mode(ide_hw
spin_unlock_irqrestore(&slc90e66_lock, flags);
}
-static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int sitre = 0, a_speed = 7 << (drive->dn * 4);
int u_speed = 0, u_flag = 1 << drive->dn;
u16 reg4042, reg44, reg48, reg4a;
+ const u8 speed = drive->dma_mode;
pci_read_config_word(dev, maslave, ®4042);
sitre = (reg4042 & 0x4000) ? 1 : 0;
Index: b/drivers/ide/tc86c001.c
===================================================================
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -13,11 +13,11 @@
#define DRV_NAME "tc86c001"
-static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
+static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
u16 mode, scr = inw(scr_port);
+ const u8 speed = drive->dma_mode;
switch (speed) {
case XFER_UDMA_4: mode = 0x00c0; break;
@@ -43,7 +43,8 @@ static void tc86c001_set_mode(ide_drive_
static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- tc86c001_set_mode(drive, drive->pio_mode);
+ drive->dma_mode = drive->pio_mode;
+ tc86c001_set_mode(hwif, drive);
}
/*
Index: b/drivers/ide/triflex.c
===================================================================
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -34,9 +34,8 @@
#define DRV_NAME "triflex"
-static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
+static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u32 triflex_timings = 0;
u16 timing = 0;
@@ -44,7 +43,7 @@ static void triflex_set_mode(ide_drive_t
pci_read_config_dword(dev, channel_offset, &triflex_timings);
- switch(speed) {
+ switch (drive->dma_mode) {
case XFER_MW_DMA_2:
timing = 0x0103;
break;
@@ -84,7 +83,8 @@ static void triflex_set_mode(ide_drive_t
static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- triflex_set_mode(drive, drive->pio_mode);
+ drive->dma_mode = drive->pio_mode;
+ triflex_set_mode(hwif, drive);
}
static const struct ide_port_ops triflex_port_ops = {
Index: b/drivers/ide/tx4939ide.c
===================================================================
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -125,10 +125,10 @@ static void tx4939ide_set_pio_mode(ide_h
/* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
}
-static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
u32 mask, val;
+ const u8 mode = drive->dma_mode;
/* Update Data Transfer Mode for this drive. */
if (mode >= XFER_UDMA_0)
Index: b/drivers/ide/via82cxxx.c
===================================================================
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -169,22 +169,22 @@ static void via_set_speed(ide_hwif_t *hw
/**
* via_set_drive - configure transfer mode
+ * @hwif: port
* @drive: Drive to set up
- * @speed: desired speed
*
* via_set_drive() computes timing values configures the chipset to
* a desired transfer mode. It also can be called by upper layers.
*/
-static void via_set_drive(ide_drive_t *drive, const u8 speed)
+static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
ide_drive_t *peer = ide_get_pair_dev(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
struct via82cxxx_dev *vdev = host->host_priv;
struct ide_timing t, p;
unsigned int T, UT;
+ const u8 speed = drive->dma_mode;
T = 1000000000 / via_clock;
@@ -216,7 +216,8 @@ static void via_set_drive(ide_drive_t *d
static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- via_set_drive(drive, drive->pio_mode);
+ drive->dma_mode = drive->pio_mode;
+ via_set_drive(hwif, drive);
}
static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -625,7 +625,7 @@ extern const struct ide_tp_ops default_t
struct ide_port_ops {
void (*init_dev)(ide_drive_t *);
void (*set_pio_mode)(struct hwif_s *, ide_drive_t *);
- void (*set_dma_mode)(ide_drive_t *, const u8);
+ void (*set_dma_mode)(struct hwif_s *, ide_drive_t *);
int (*reset_poll)(ide_drive_t *);
void (*pre_reset)(ide_drive_t *);
void (*resetproc)(ide_drive_t *);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
