On 01/12/2010 07:00 PM, Seth Heasley wrote:
This patch adds the Intel Cougar Point (PCH) SATA AHCI and RAID Controller DeviceIDs.
Signed-off-by: Seth Heasley<seth.heasley@xxxxxxxxx>
--- linux-2.6.32.3/drivers/ata/ahci.c.orig 2010-01-06 15:07:45.000000000 -0800
+++ linux-2.6.32.3/drivers/ata/ahci.c 2010-01-07 13:55:23.000000000 -0800
@@ -560,6 +560,12 @@
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
The RAID mode entries would be needed if the device indicates RAID class
in that mode, but in plain AHCI mode it should indicate SATA AHCI class
which will get picked up by this catch-all so those entries shouldn't be
needed:
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
Likely a lot of the existing specific PCI IDs could be removed from the
driver because of this (many likely predate the addition of the
class-based catch-all). The only reason to need a specific entry if the
device uses AHCI class is if it needs special handling or workarounds,
which isn't the case here.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html