After activating the MSI support by adding sata_sil24.msi=1 to the
kernel command line, the first write to a drive attached to the SiI
3132 controller results in the following errors:
[ 138.950074] ata2.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen
[ 138.961023] ata2.00: failed command: WRITE FPDMA QUEUED
[ 138.970034] ata2.00: cmd 61/00:00:a5:95:4a/04:00:01:00:00/40 tag 0
ncq 524288 out
[ 138.970037] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 138.992467] ata2.00: status: { DRDY }
[ 138.999864] ata2.00: failed command: WRITE FPDMA QUEUED
[ 139.008830] ata2.00: cmd 61/00:08:a5:91:4a/04:00:01:00:00/40 tag 1
ncq 524288 out
[ 139.008833] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 139.031370] ata2.00: status: { DRDY }
[ 139.038906] ata2.00: failed command: WRITE FPDMA QUEUED
[ 139.048055] ata2.00: cmd 61/00:10:a5:8d:4a/04:00:01:00:00/40 tag 2
ncq 524288 out
[ 139.048058] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 139.070828] ata2.00: status: { DRDY }
[ 139.078383] ata2.00: failed command: WRITE FPDMA QUEUED
[ 139.087506] ata2.00: cmd 61/00:18:a5:99:4a/04:00:01:00:00/40 tag 3
ncq 524288 out
[ 139.087509] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 139.110281] ata2.00: status: { DRDY }
[ 139.117877] ata2: hard resetting link
[ 141.310057] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 146.310037] ata2.00: qc timeout (cmd 0xec)
[ 146.318032] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 146.328027] ata2.00: revalidation failed (errno=-5)
[ 146.336815] ata2: hard resetting link
[ 148.530055] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 158.530035] ata2.00: qc timeout (cmd 0xec)
[ 158.538066] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 158.548122] ata2.00: revalidation failed (errno=-5)
[ 158.556955] ata2: limiting SATA link speed to 1.5 Gbps
[ 158.566052] ata2: hard resetting link
[ 160.760071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 190.760046] ata2.00: qc timeout (cmd 0xec)
[ 190.768137] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 190.778219] ata2.00: revalidation failed (errno=-5)
[ 190.787085] ata2.00: disabled
[ 190.794002] ata2.00: device reported invalid CHS sector 0
[ 190.803368] ata2.00: device reported invalid CHS sector 0
[ 190.812704] ata2.00: device reported invalid CHS sector 0
[ 190.821965] ata2.00: device reported invalid CHS sector 0
[ 190.831231] ata2: hard resetting link
[ 193.030050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 193.030073] ata2: EH complete
[ 193.030112] sd 1:0:0:0: [sdb] Unhandled error code
[ 193.030120] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[ 193.030127] sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 01 4a 99 a5 00 04 00 00
[ 193.030141] end_request: I/O error, dev sdb, sector 21666213
[ 193.039854] sd 1:0:0:0: [sdb] Unhandled error code
[ 193.039857] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[ 193.039862] sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 01 4a 8d a5 00 04 00 00
[ 193.039874] end_request: I/O error, dev sdb, sector 21663141
[ 193.040083] sd 1:0:0:0: [sdb] Unhandled error code
This repeats for a large number of times, then the XFS filesystem gets
shut down.
More information about my system are in my first report:
http://lkml.org/lkml/2009/12/19/82
lspci -vv for both the normal, working and the broken MSI case are in
my second try to report this:
http://lkml.org/lkml/2009/12/25/12
Please ask, if you need more information.
Torsten
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
