Re: MSI broken in libata?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 19, 2010 at 3:03 AM, Robert Hancock <hancockrwd@xxxxxxxxx> wrote:
> On 01/18/2010 02:51 PM, Torsten Kaiser wrote:
>> If I kill the drive with reading a 1GB file with dd, I get the above
>> errors, include the one from do_IRQ.
>> If I kill the drive with writing a 1GB file with dd, I do not get the
>> do_IRQ error.
>> As I tested the earlier -rcs only with writes, I didn't see it there.
>> (Its not even in the old logs that contain the libata errors)
>>
>> Should I try to put some printks in arch/x86/kernel/apic/io_apic.c
>> __assign_irq_vector() or is there a better way to look at the irq
>> vectors?
>
> Might not be a bad idea. Something definitely seems to be banging on vector
> 165. Any references to 165 in dmesg prior to that? I wonder where that is
> coming from..

I still have no clue, where that interrupt comes from, maybe these
outputs will help:
(complete log attached)

First the PCIe bridges allocate some vectors:
[    1.789044] pcieport 0000:00:0b.0: setting latency timer to 64
[    1.789058]   alloc irq_desc for 24 on node 0
[    1.789060]   alloc kstat_irqs on node 0
[    1.789063] __assign_irq_vector:assigning irq 24 to vector 73
[    1.794655] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[    1.794968] pcieport 0000:00:0c.0: setting latency timer to 64
[    1.794980]   alloc irq_desc for 25 on node 0
[    1.794981]   alloc kstat_irqs on node 0
[    1.794983] __assign_irq_vector:assigning irq 25 to vector 81
[    1.800569] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[    1.800870] pcieport 0000:00:0d.0: setting latency timer to 64
[    1.800882]   alloc irq_desc for 26 on node 0
[    1.800883]   alloc kstat_irqs on node 0
[    1.800885] __assign_irq_vector:assigning irq 26 to vector 89
[    1.806455] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[    1.806766] pcieport 0000:00:0f.0: setting latency timer to 64
[    1.806778]   alloc irq_desc for 27 on node 0
[    1.806779]   alloc kstat_irqs on node 0
[    1.806781] __assign_irq_vector:assigning irq 27 to vector 97
[    1.812366] pcieport 0000:00:0f.0: irq 27 for MSI/MSI-X
radeon allocates to vectors, is that right?
[    1.861528] [drm] radeon kernel modesetting enabled.
[    1.866835] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[    1.872598]   alloc irq_desc for 19 on node 0
[    1.872600]   alloc kstat_irqs on node 0
[    1.872602] __assign_irq_vector:assigning irq 19 to vector 105
[    1.878261] radeon 0000:01:00.0: PCI INT A -> Link[LNEB] -> GSI 19
(level, low) -> IRQ 19
[    1.886673] radeon 0000:01:00.0: setting latency timer to 64
[    1.888791] [drm] radeon: Initializing kernel modesetting.
[    1.894449] [drm] register mmio base: 0xEFBF0000
[    1.899068] [drm] register mmio size: 65536
[    1.903947] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    1.909620] [drm] Generation 2 PCI interface, using max accessible memory
[    1.916436] [drm] radeon: VRAM 128M
[    1.919930] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[    1.925610] [drm] radeon: GTT 512M
[    1.929022] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[    1.934635]   alloc irq_desc for 28 on node 0
[    1.934637]   alloc kstat_irqs on node 0
[    1.934640] __assign_irq_vector:assigning irq 28 to vector 113
[    1.940314] radeon 0000:01:00.0: irq 28 for MSI/MSI-X
[    1.940522] [drm] radeon: using MSI.
[    1.944120] [drm] radeon: irq initialized.
Now sata_sil24 gets vector 121:
[    2.525316] sata_sil24 0000:04:00.0: version 1.1
[    2.525337] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI
19 (level, low)
-> IRQ 19
[    2.533990]   alloc irq_desc for 29 on node 0
[    2.533991]   alloc kstat_irqs on node 0
[    2.533994] __assign_irq_vector:assigning irq 29 to vector 121
[    2.539681] sata_sil24 0000:04:00.0: irq 29 for MSI/MSI-X
[    2.539882] sata_sil24 0000:04:00.0: Using MSI
[    2.544372] sata_sil24 0000:04:00.0: setting latency timer to 64
sata_nv gets 3 interrupts (the MCP55 has 6 ports)
[    2.565829] sata_nv 0000:00:05.0: version 3.5
[    2.566114] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    2.571896]   alloc irq_desc for 23 on node 0
[    2.571898]   alloc kstat_irqs on node 0
[    2.571900] __assign_irq_vector:assigning irq 23 to vector 129
[    2.577583] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23
(level, low) ->
IRQ 23
[    2.586099] sata_nv 0000:00:05.0: Using SWNCQ mode
[    2.590956] sata_nv 0000:00:05.0: setting latency timer to 64
[    2.591071] scsi2 : sata_nv
[    2.594013] scsi3 : sata_nv
[    2.597018] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23
[    2.604196] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23
[    2.611671] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[    2.617435]   alloc irq_desc for 22 on node 0
[    2.617436]   alloc kstat_irqs on node 0
[    2.617438] __assign_irq_vector:assigning irq 22 to vector 137
[    2.623152] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22
(level, low) ->
IRQ 22
[    2.631657] sata_nv 0000:00:05.1: Using SWNCQ mode
[    2.636490] sata_nv 0000:00:05.1: setting latency timer to 64
[    2.636618] scsi4 : sata_nv
[    2.639558] scsi5 : sata_nv
[    2.642573] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22
[    2.649726] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22
[    2.657246] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[    2.663034]   alloc irq_desc for 21 on node 0
[    2.663035]   alloc kstat_irqs on node 0
[    2.663037] __assign_irq_vector:assigning irq 21 to vector 145
[    2.668720] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21
(level, low) -> IRQ 21
[    2.677237] sata_nv 0000:00:05.2: Using SWNCQ mode
[    2.682085] sata_nv 0000:00:05.2: setting latency timer to 64
[    2.682204] scsi6 : sata_nv
[    2.685148] scsi7 : sata_nv
[    2.688149] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
[    2.695325] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
the network chips follow:
[    2.729649] tg3.c:v3.105 (December 2, 2009)
[    2.735339] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[    2.742377]   alloc irq_desc for 18 on node 0
[    2.742378]   alloc kstat_irqs on node 0
[    2.742380] __assign_irq_vector:assigning irq 18 to vector 153
[    2.748065] tg3 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18
(level, low) -> IRQ 18
...
[    2.838517] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[    2.845796]   alloc irq_desc for 17 on node 0
[    2.845797]   alloc kstat_irqs on node 0
[    2.845799] __assign_irq_vector:assigning irq 17 to vector 161
[    2.851501] tg3 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 17
(level, low) -> IRQ 17
one for the firewrie chip:
[    2.939495] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[    2.946971]   alloc irq_desc for 16 on node 0
[    2.946972]   alloc kstat_irqs on node 0
[    2.946974] __assign_irq_vector:assigning irq 16 to vector 169
[    2.952677] ohci1394 0000:05:08.0: PCI INT A -> Link[LNKA] -> GSI
16 (level, low) -> IRQ 16
USB:
[    3.058354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.066956] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[    3.074517]   alloc irq_desc for 20 on node 0
[    3.074518]   alloc kstat_irqs on node 0
[    3.074520] __assign_irq_vector:assigning irq 20 to vector 177
[    3.080223] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI
20 (level, low) -> IRQ 20
and the last allocation for HDA Intel:
[    4.993274]   alloc irq_desc for 30 on node 0
[    4.993276]   alloc kstat_irqs on node 0
[    4.993279] __assign_irq_vector:assigning irq 30 to vector 185
[    4.998961] HDA Intel 0000:00:06.1: irq 30 for MSI/MSI-X
During booting the tg3's change there interrupts. Huh?
[   19.135631]   alloc irq_desc for 31 on node 0
[   19.135639]   alloc kstat_irqs on node 0
[   19.135646] __assign_irq_vector:assigning irq 31 to vector 193
[   19.135663] tg3 0000:03:00.0: irq 31 for MSI/MSI-X
[   22.326847] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[   22.326854] tg3: eth0: Flow control is on for TX and on for RX.
[   23.434378]   alloc irq_desc for 32 on node 0
[   23.434386]   alloc kstat_irqs on node 0
[   23.434393] __assign_irq_vector:assigning irq 32 to vector 201
[   23.434410] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
[   26.104711] tg3: eth1: Link is up at 1000 Mbps, full duplex.
[   26.104718] tg3: eth1: Flow control is on for TX and on for RX.

Then I rerun my readtest and got the same do_IRQ error again:
[  100.664581] do_IRQ: 0.165 No irq handler for vector (irq -1)
[  100.664598] do_IRQ: 1.165 No irq handler for vector (irq -1)
[  100.664619] do_IRQ: 3.165 No irq handler for vector (irq -1)
[  100.664632] do_IRQ: 2.165 No irq handler for vector (irq -1)
[  130.980054] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[  130.980065] ata2.00: failed command: READ FPDMA QUEUED
[  130.980077] ata2.00: cmd 60/00:00:ad:9b:da/01:00:01:00:00/40 tag 0
ncq 131072 in
[  130.980080]          res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
[  130.980085] ata2.00: status: { DRDY }
[  130.980090] ata2.00: failed command: READ FPDMA QUEUED
[  130.980099] ata2.00: cmd 60/00:08:ad:9c:da/01:00:01:00:00/40 tag 1
ncq 131072 in
[  130.980101]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[  130.980106] ata2.00: status: { DRDY }

As I did not see any real relation, I disabled all unneeded drivers
and tested again.
This minimal kernel had the following interrupt map:
           CPU0       CPU1       CPU2       CPU3
  0:         36          0          0          1   IO-APIC-edge      timer
  1:          0          0          1        152   IO-APIC-edge      i8042
  4:          0          0          0        212   IO-APIC-edge      serial
  7:          1          0          0          0   IO-APIC-edge
  9:          0          0          0          0   IO-APIC-fasteoi   acpi
 12:          0          0          0          4   IO-APIC-edge      i8042
 21:          0          0          0          0   IO-APIC-fasteoi   sata_nv
 22:          0          0          0          0   IO-APIC-fasteoi   sata_nv
 23:          0          5          4       4980   IO-APIC-fasteoi   sata_nv
 28:          0          1          0        168   PCI-MSI-edge      sata_sil24
NMI:          0          0          0          0   Non-maskable interrupts
LOC:       2147       2390       2285       2344   Local timer interrupts
SPU:          0          0          0          0   Spurious interrupts
PMI:          0          0          0          0   Performance
monitoring interrupts
PND:          0          0          0          0   Performance pending work
RES:       3702       3458       2094       2746   Rescheduling interrupts
CAL:        660         33         41         26   Function call interrupts
TLB:        484        200        448        581   TLB shootdowns
THR:          0          0          0          0   Threshold APIC interrupts
MCE:          0          0          0          0   Machine check exceptions
MCP:          1          1          1          1   Machine check polls
ERR:          1
MIS:          0

Output of the __assign_irq:
4x PCIe bridge:
[    1.759016] __assign_irq_vector:assigning irq 24 to vector 73
[    1.764928] __assign_irq_vector:assigning irq 25 to vector 81
[    1.770827] __assign_irq_vector:assigning irq 26 to vector 89
[    1.776720] __assign_irq_vector:assigning irq 27 to vector 97
sata_sil24 first gets 19:
[    1.856245] __assign_irq_vector:assigning irq 19 to vector 105
then switches to MSI-28:
[    1.870768] __assign_irq_vector:assigning irq 28 to vector 113
3 normal interrupts for sata_nv:
[    1.908504] __assign_irq_vector:assigning irq 23 to vector 121
[    1.953848] __assign_irq_vector:assigning irq 22 to vector 129
[    1.999155] __assign_irq_vector:assigning irq 21 to vector 137

Writing failed again without a message, but the read test showed:
[   85.695745] do_IRQ: 0.165 No irq handler for vector (irq -1)
[   85.695763] do_IRQ: 1.165 No irq handler for vector (irq -1)
[   85.695785] do_IRQ: 3.165 No irq handler for vector (irq -1)
[   85.695800] do_IRQ: 2.165 No irq handler for vector (irq -1)
Same vector in this error, but sata_sil24 had MSI irq 28 instead of 29!
And the vector allocations where not even near 165!


Torsten
[    0.000000] Linux version 2.6.33-rc4 (root@treogen) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #2 SMP Tue Jan 19 19:36:07 CET 2010
[    0.000000] Command line: root=/dev/sdc1 console=ttyS0,115200 console=tty1 sata_sil24.msi=1 radeon.modeset=1 raid=noautodetect
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable)
[    0.000000]  BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00C0000000 mask FFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000120000000 aka 4608M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000
[    0.000000]  0000000000 - 00dfe00000 page 2M
[    0.000000]  00dfe00000 - 00dffd0000 page 4k
[    0.000000] kernel direct mapping tables up to dffd0000 @ 8000-e000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[    0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT  04000713 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP  04000713 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01  S0027 S0027000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000dffde000 00040
[    0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC  04000713 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG  04000713 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM  04000713 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG  04000713 MSFT 00000097)
[    0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD    HAMMER   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-80000000
[    0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[    0.000000] SRAT: Node 1 PXM 1 100000000-120000000
[    0.000000] NUMA: Allocated memnodemap from d000 - f440
[    0.000000] NUMA: Using 20 for the hash shift.
[    0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[    0.000000]   NODE_DATA [000000000000f440 - 000000000002343f]
[    0.000000]   bootmap [0000000000024000 -  0000000000033fff] pages 10
[    0.000000] (12 early reservations) ==> bootmem [0000000000 - 0080000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0001000000 - 00019e0658]    TEXT DATA BSS ==> [0001000000 - 00019e0658]
[    0.000000]   #2 [00019e1000 - 00019e1238]              BRK ==> [00019e1000 - 00019e1238]
[    0.000000]   #3 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
[    0.000000]   #4 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
[    0.000000]   #5 [000009fc00 - 00000f16f0]    BIOS reserved ==> [000009fc00 - 00000f16f0]
[    0.000000]   #6 [00000f188c - 00000ff780]    BIOS reserved ==> [00000f188c - 00000ff780]
[    0.000000]   #7 [00000f16f0 - 00000f188c]     MP-table mpc ==> [00000f16f0 - 00000f188c]
[    0.000000]   #8 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
[    0.000000]   #9 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
[    0.000000]   #10 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
[    0.000000]   #11 [000000d000 - 000000f440]       MEMNODEMAP ==> [000000d000 - 000000f440]
[    0.000000] Bootmem setup node 1 0000000080000000-0000000120000000
[    0.000000]   NODE_DATA [0000000080000000 - 0000000080013fff]
[    0.000000]   bootmap [0000000080014000 -  0000000080027fff] pages 14
[    0.000000] (12 early reservations) ==> bootmem [0080000000 - 0120000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page
[    0.000000]   #1 [0001000000 - 00019e0658]    TEXT DATA BSS
[    0.000000]   #2 [00019e1000 - 00019e1238]              BRK
[    0.000000]   #3 [00000ff790 - 0000100000]    BIOS reserved
[    0.000000]   #4 [00000ff780 - 00000ff790]     MP-table mpf
[    0.000000]   #5 [000009fc00 - 00000f16f0]    BIOS reserved
[    0.000000]   #6 [00000f188c - 00000ff780]    BIOS reserved
[    0.000000]   #7 [00000f16f0 - 00000f188c]     MP-table mpc
[    0.000000]   #8 [0000001000 - 0000003000]       TRAMPOLINE
[    0.000000]   #9 [0000008000 - 000000c000]          PGTABLE
[    0.000000]   #10 [000000c000 - 000000d000]          PGTABLE
[    0.000000]   #11 [000000d000 - 000000f440]       MEMNODEMAP
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880028600000-ffff88002a1fffff] on node 0
[    0.000000]  [ffffea0001c00000-ffffea0003ffffff] PMD -> [ffff880080200000-ffff880081ffffff] on node 1
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00080000
[    0.000000]     1: 0x00080000 -> 0x000dffd0
[    0.000000]     1: 0x00100000 -> 0x00120000
[    0.000000] On node 0 totalpages: 524191
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 104 pages reserved
[    0.000000]   DMA zone: 3839 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7112 pages used for memmap
[    0.000000]   DMA32 zone: 513080 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 524240
[    0.000000]   DMA32 zone: 7168 pages used for memmap
[    0.000000]   DMA32 zone: 386000 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 129280 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff880028200000 s77784 r8192 d20520 u1048576
[    0.000000] pcpu-alloc: s77784 r8192 d20520 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 [1] 2 3 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1032199
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sdc1 console=ttyS0,115200 console=tty1 sata_sil24.msi=1 radeon.modeset=1 raid=noautodetect
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 20000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.000000] Memory: 3991920k/4718592k available (5218k kernel code, 524868k absent, 201804k reserved, 3065k data, 1208k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU-based detection of stalled CPUs is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty1] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2599.975 MHz processor.
[    0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.95 BogoMIPS (lpj=25999750)
[    0.030032] Security Framework initialized
[    0.034370] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.042628] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.051172] Mount-cache hash table entries: 256
[    0.055840] tseg: 0000000000
[    0.055850] CPU: Physical Processor ID: 0
[    0.060003] CPU: Processor Core ID: 0
[    0.063670] mce: CPU supports 5 MCE banks
[    0.067688] using C1E aware idle routine
[    0.070002] Performance Events: AMD PMU driver.
[    0.074562] ... version:                0
[    0.080001] ... bit width:              48
[    0.084093] ... generic registers:      4
[    0.090001] ... value mask:             0000ffffffffffff
[    0.095305] ... max period:             00007fffffffffff
[    0.100001] ... fixed-purpose events:   0
[    0.104009] ... event mask:             000000000000000f
[    0.110010] Freeing SMP alternatives: 34k freed
[    0.114564] ACPI: Core revision 20091214
[    0.127936] Setting APIC routing to flat
[    0.130427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.238494] CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
[    0.250000] Booting Node   0, Processors  #1 Ok.
[    0.400717] Booting Node   1, Processors  #2 #3 Ok.
[    0.720115] Brought up 4 CPUs
[    0.723091] Total of 4 processors activated (20799.99 BogoMIPS).
[    0.729498] NET: Registered protocol family 16
[    0.730020] node 0 link 0: io port [3000, ffffff]
[    0.730020] node 0 link 0: io port [2000, 2fff]
[    0.730020] TOM: 00000000e0000000 aka 3584M
[    0.734195] node 0 link 0: mmio [f0000000, f3ffffff]
[    0.734198] node 0 link 0: mmio [a0000, bffff]
[    0.734201] node 0 link 0: mmio [e0000000, efffffff]
[    0.734203] TOM2: 0000000120000000 aka 4608M
[    0.740002] bus: [00, ff] on node 0 link 0
[    0.740004] bus: 00 index 0 io port: [0, ffff]
[    0.740006] bus: 00 index 1 mmio: [e0000000, ffffffff]
[    0.740008] bus: 00 index 2 mmio: [a0000, bffff]
[    0.740009] bus: 00 index 3 mmio: [120000000, fcffffffff]
[    0.740015] ACPI: bus type pci registered
[    0.744037] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[    0.750002] PCI: not using MMCONFIG
[    0.760002] PCI: Using configuration type 1 for base access
[    0.770265] bio: create slab <bio-0> at 0
[    0.780588] ACPI: EC: Look up EC in DSDT
[    0.783847] ACPI: Executed 1 blocks of module-level executable AML code
[    0.796480] ACPI: Interpreter enabled
[    0.800001] ACPI: (supports S0 S5)
[    0.803477] ACPI: Using IOAPIC for interrupt routing
[    0.808483] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[    0.845561] [Firmware Bug]: PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] not reserved in ACPI motherboard resources
[    0.850001] PCI: not using MMCONFIG
[    0.860741] ACPI Warning: Incorrect checksum in table [OEMB] - EC, should be E7 (20091214/tbutils-314)
[    0.876979] ACPI: No dock devices found.
[    0.880253] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.885061] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[    0.890446] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.890448] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.890450] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.890452] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.890454] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[    0.890591] pci 0000:00:01.0: reg 10: [io  0x2f00-0x2f7f]
[    0.890618] pci 0000:00:01.1: reg 10: [io  0xa880-0xa8bf]
[    0.890628] pci 0000:00:01.1: reg 20: [io  0x2a00-0x2a3f]
[    0.890631] pci 0000:00:01.1: reg 24: [io  0x2a80-0x2abf]
[    0.890649] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.890654] pci 0000:00:01.1: PME# disabled
[    0.890672] pci 0000:00:02.0: reg 10: [mem 0xefaf8000-0xefaf8fff]
[    0.890688] pci 0000:00:02.0: supports D1 D2
[    0.890689] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890691] pci 0000:00:02.0: PME# disabled
[    0.890704] pci 0000:00:02.1: reg 10: [mem 0xefaebc00-0xefaebcff]
[    0.890719] pci 0000:00:02.1: supports D1 D2
[    0.890721] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890723] pci 0000:00:02.1: PME# disabled
[    0.890742] pci 0000:00:04.0: reg 20: [io  0xffa0-0xffaf]
[    0.890761] pci 0000:00:05.0: reg 10: [io  0xcc00-0xcc07]
[    0.890764] pci 0000:00:05.0: reg 14: [io  0xc880-0xc883]
[    0.890767] pci 0000:00:05.0: reg 18: [io  0xc800-0xc807]
[    0.890769] pci 0000:00:05.0: reg 1c: [io  0xc480-0xc483]
[    0.890772] pci 0000:00:05.0: reg 20: [io  0xc400-0xc40f]
[    0.890775] pci 0000:00:05.0: reg 24: [mem 0xefafb000-0xefafbfff]
[    0.890796] pci 0000:00:05.1: reg 10: [io  0xc080-0xc087]
[    0.890799] pci 0000:00:05.1: reg 14: [io  0xc000-0xc003]
[    0.890802] pci 0000:00:05.1: reg 18: [io  0xbc00-0xbc07]
[    0.890804] pci 0000:00:05.1: reg 1c: [io  0xb880-0xb883]
[    0.890807] pci 0000:00:05.1: reg 20: [io  0xb800-0xb80f]
[    0.890810] pci 0000:00:05.1: reg 24: [mem 0xefafa000-0xefafafff]
[    0.890831] pci 0000:00:05.2: reg 10: [io  0xb480-0xb487]
[    0.890834] pci 0000:00:05.2: reg 14: [io  0xb400-0xb403]
[    0.890837] pci 0000:00:05.2: reg 18: [io  0xb080-0xb087]
[    0.890839] pci 0000:00:05.2: reg 1c: [io  0xb000-0xb003]
[    0.890842] pci 0000:00:05.2: reg 20: [io  0xac00-0xac0f]
[    0.890845] pci 0000:00:05.2: reg 24: [mem 0xefaf9000-0xefaf9fff]
[    0.890889] pci 0000:00:06.1: reg 10: [mem 0xefafc000-0xefafffff]
[    0.890908] pci 0000:00:06.1: PME# supported from D3hot D3cold
[    0.890910] pci 0000:00:06.1: PME# disabled
[    0.890938] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890940] pci 0000:00:0b.0: PME# disabled
[    0.890961] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890963] pci 0000:00:0c.0: PME# disabled
[    0.890984] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890986] pci 0000:00:0d.0: PME# disabled
[    0.891008] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.891010] pci 0000:00:0f.0: PME# disabled
[    0.891127] pci 0000:05:06.0: reg 10: [mem 0xeefff000-0xeeffffff pref]
[    0.891168] pci 0000:05:06.1: reg 10: [mem 0xeeffe000-0xeeffefff pref]
[    0.891214] pci 0000:05:08.0: reg 10: [mem 0xeffff800-0xefffffff]
[    0.891218] pci 0000:05:08.0: reg 14: [mem 0xefff8000-0xefffbfff]
[    0.891241] pci 0000:05:08.0: supports D1 D2
[    0.891242] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot
[    0.891245] pci 0000:05:08.0: PME# disabled
[    0.891264] pci 0000:00:06.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.900003] pci 0000:00:06.0:   bridge window [mem 0xeff00000-0xefffffff]
[    0.900005] pci 0000:00:06.0:   bridge window [mem 0xeef00000-0xeeffffff pref]
[    0.900040] pci 0000:04:00.0: reg 10: [mem 0xefeffc00-0xefeffc7f 64bit]
[    0.900053] pci 0000:04:00.0: reg 18: [mem 0xefef8000-0xefefbfff 64bit]
[    0.900060] pci 0000:04:00.0: reg 20: [io  0xec00-0xec7f]
[    0.900073] pci 0000:04:00.0: reg 30: [mem 0xefe00000-0xefe7ffff pref]
[    0.900105] pci 0000:04:00.0: supports D1 D2
[    0.900119] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.910027] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    0.920003] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.920006] pci 0000:00:0b.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.920034] pci 0000:03:00.0: reg 10: [mem 0xefdf0000-0xefdfffff 64bit]
[    0.920079] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.920082] pci 0000:03:00.0: PME# disabled
[    0.940028] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    0.945258] pci 0000:00:0c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.945287] pci 0000:02:00.0: reg 10: [mem 0xefcf0000-0xefcfffff 64bit]
[    0.945332] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.945335] pci 0000:02:00.0: PME# disabled
[    0.960028] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.965373] pci 0000:00:0d.0:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.965389] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[    0.965393] pci 0000:01:00.0: reg 14: [io  0xd000-0xd0ff]
[    0.965396] pci 0000:01:00.0: reg 18: [mem 0xefbf0000-0xefbfffff]
[    0.965407] pci 0000:01:00.0: reg 30: [mem 0xefbc0000-0xefbdffff pref]
[    0.965419] pci 0000:01:00.0: supports D1 D2
[    0.965434] pci 0000:01:00.1: reg 10: [mem 0xefbe0000-0xefbeffff]
[    0.965458] pci 0000:01:00.1: supports D1 D2
[    0.965466] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.970025] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[    0.980002] pci 0000:00:0f.0:   bridge window [io  0xd000-0xdfff]
[    0.980004] pci 0000:00:0f.0:   bridge window [mem 0xefb00000-0xefbfffff]
[    0.980007] pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.980017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.980209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.980264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.980313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.980353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.980394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.990152] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.996729] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    1.002947] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[    1.011461] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.018916] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[    1.022635] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    1.032041] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    1.040373] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5
[    1.046860] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    1.052041] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[    1.060374] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    1.066945] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    1.072932] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    1.081452] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    1.088025] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[    1.091956] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    1.101063] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[    1.107673] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    1.112949] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
[    1.121627] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.130002] vgaarb: loaded
[    1.132760] SCSI subsystem initialized
[    1.133775] libata version 3.00 loaded.
[    1.133775] usbcore: registered new interface driver usbfs
[    1.140011] usbcore: registered new interface driver hub
[    1.145318] usbcore: registered new device driver usb
[    1.150015] PCI: Using ACPI for IRQ routing
[    1.154368] PCI: pci_cache_line_size set to 64 bytes
[    1.154453] NetLabel: Initializing
[    1.160001] NetLabel:  domain hash size = 128
[    1.164355] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.170011] NetLabel:  unlabeled traffic allowed by default
[    1.175581] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.180005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.185110] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.220006] Switching to clocksource hpet
[    1.224025] Slow work thread pool: Starting up
[    1.224671] Slow work thread pool: Ready
[    1.228653] FS-Cache: Loaded
[    1.231628] CacheFiles: Loaded
[    1.234714] pnp: PnP ACPI init
[    1.237785] ACPI: bus type pnp registered
[    1.246683] pnp: PnP ACPI: found 14 devices
[    1.250870] ACPI: ACPI bus type pnp unregistered
[    1.255532] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    1.261449] system 00:06: [io  0x07b0-0x07df] has been reserved
[    1.267395] system 00:06: [io  0x0800-0x080f] has been reserved
[    1.273333] system 00:06: [io  0x0bb0-0x0bdf] has been reserved
[    1.279406] system 00:06: [io  0x2000-0x207f] has been reserved
[    1.285363] system 00:06: [io  0x2080-0x20ff] has been reserved
[    1.291279] system 00:06: [io  0x2400-0x247f] has been reserved
[    1.297226] system 00:06: [io  0x2480-0x24ff] has been reserved
[    1.303162] system 00:06: [io  0x2800-0x287f] has been reserved
[    1.309082] system 00:06: [io  0x2880-0x28ff] has been reserved
[    1.315037] system 00:06: [io  0x2c00-0x2c7f] has been reserved
[    1.320955] system 00:06: [io  0x2c80-0x2cff] has been reserved
[    1.326911] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[    1.333547] system 00:06: [mem 0xefa80000-0xefabffff] has been reserved
[    1.340160] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved
[    1.346981] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[    1.353615] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.360576] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.367228] system 00:0c: [io  0x0290-0x0297] has been reserved
[    1.373166] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.380129] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[    1.386780] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.393759] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[    1.400722] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[    1.413366] pci 0000:00:06.0: PCI bridge to [bus 05-05]
[    1.418593] pci 0000:00:06.0:   bridge window [io  disabled]
[    1.424290] pci 0000:00:06.0:   bridge window [mem 0xeff00000-0xefffffff]
[    1.431081] pci 0000:00:06.0:   bridge window [mem 0xeef00000-0xeeffffff pref]
[    1.438339] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    1.443581] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    1.449671] pci 0000:00:0b.0:   bridge window [mem 0xefe00000-0xefefffff]
[    1.456493] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    1.462604] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    1.467829] pci 0000:00:0c.0:   bridge window [io  disabled]
[    1.473680] pci 0000:00:0c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    1.480462] pci 0000:00:0c.0:   bridge window [mem pref disabled]
[    1.486595] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    1.491819] pci 0000:00:0d.0:   bridge window [io  disabled]
[    1.497513] pci 0000:00:0d.0:   bridge window [mem 0xefc00000-0xefcfffff]
[    1.504315] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    1.510408] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[    1.515668] pci 0000:00:0f.0:   bridge window [io  0xd000-0xdfff]
[    1.521761] pci 0000:00:0f.0:   bridge window [mem 0xefb00000-0xefbfffff]
[    1.528583] Clocksource tsc unstable (delta = 4397408805581 ns)
[    1.534655] pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[    1.542400] pci 0000:00:06.0: setting latency timer to 64
[    1.542405] pci 0000:00:0b.0: setting latency timer to 64
[    1.542410] pci 0000:00:0c.0: setting latency timer to 64
[    1.542414] pci 0000:00:0d.0: setting latency timer to 64
[    1.542418] pci 0000:00:0f.0: setting latency timer to 64
[    1.542421] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    1.542423] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[    1.542426] pci_bus 0000:05: resource 1 [mem 0xeff00000-0xefffffff]
[    1.542428] pci_bus 0000:05: resource 2 [mem 0xeef00000-0xeeffffff pref]
[    1.542430] pci_bus 0000:05: resource 3 [io  0x0000-0xffff]
[    1.542432] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff]
[    1.542435] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    1.542437] pci_bus 0000:04: resource 1 [mem 0xefe00000-0xefefffff]
[    1.542439] pci_bus 0000:03: resource 1 [mem 0xefd00000-0xefdfffff]
[    1.542441] pci_bus 0000:02: resource 1 [mem 0xefc00000-0xefcfffff]
[    1.542443] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.542445] pci_bus 0000:01: resource 1 [mem 0xefb00000-0xefbfffff]
[    1.542448] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff 64bit pref]
[    1.542480] NET: Registered protocol family 2
[    1.547015] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.555743] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.568029] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.575297] TCP: Hash tables configured (established 524288 bind 65536)
[    1.581914] TCP reno registered
[    1.585109] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.591169] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.597776] NET: Registered protocol family 1
[    1.602452] RPC: Registered udp transport module.
[    1.607176] RPC: Registered tcp transport module.
[    1.611889] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.640111] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.645670] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.651198] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.656754] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.662283] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.667853] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.673393] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.678960] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.684519] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.690037] pci 0000:01:00.0: Boot video device
[    1.690041] PCI: CLS 64 bytes, default 64
[    1.690148] PCI-DMA: Disabling AGP.
[    1.693853] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    1.699426] PCI-DMA: using GART IOMMU.
[    1.703183] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.714830] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.723845] VFS: Disk quotas dquot_6.5.2
[    1.727854] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.734453] FS-Cache: Netfs 'nfs' registered for caching
[    1.740004] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    1.749436] SGI XFS Quota Management subsystem
[    1.753906] msgmni has been set to 7925
[    1.758547] alg: No test for stdrng (krng)
[    1.766702] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    1.772748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    1.780169] io scheduler noop registered
[    1.784180] io scheduler cfq registered (default)
[    1.789044] pcieport 0000:00:0b.0: setting latency timer to 64
[    1.789058]   alloc irq_desc for 24 on node 0
[    1.789060]   alloc kstat_irqs on node 0
[    1.789063] __assign_irq_vector:assigning irq 24 to vector 73
[    1.794655] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[    1.794968] pcieport 0000:00:0c.0: setting latency timer to 64
[    1.794980]   alloc irq_desc for 25 on node 0
[    1.794981]   alloc kstat_irqs on node 0
[    1.794983] __assign_irq_vector:assigning irq 25 to vector 81
[    1.800569] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[    1.800870] pcieport 0000:00:0d.0: setting latency timer to 64
[    1.800882]   alloc irq_desc for 26 on node 0
[    1.800883]   alloc kstat_irqs on node 0
[    1.800885] __assign_irq_vector:assigning irq 26 to vector 89
[    1.806455] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[    1.806766] pcieport 0000:00:0f.0: setting latency timer to 64
[    1.806778]   alloc irq_desc for 27 on node 0
[    1.806779]   alloc kstat_irqs on node 0
[    1.806781] __assign_irq_vector:assigning irq 27 to vector 97
[    1.812366] pcieport 0000:00:0f.0: irq 27 for MSI/MSI-X
[    1.812961] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.821341] ACPI: Power Button [PWRB]
[    1.825100] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.832492] ACPI: Power Button [PWRF]
[    1.839448] Real Time Clock Driver v1.12b
[    1.843712] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[    1.852692] Hangcheck: Using get_cycles().
[    1.856856] [drm] Initialized drm 1.1.0 20060810
[    1.861528] [drm] radeon kernel modesetting enabled.
[    1.866835] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[    1.872598]   alloc irq_desc for 19 on node 0
[    1.872600]   alloc kstat_irqs on node 0
[    1.872602] __assign_irq_vector:assigning irq 19 to vector 105
[    1.878261] radeon 0000:01:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[    1.886673] radeon 0000:01:00.0: setting latency timer to 64
[    1.888791] [drm] radeon: Initializing kernel modesetting.
[    1.894449] [drm] register mmio base: 0xEFBF0000
[    1.899068] [drm] register mmio size: 65536
[    1.903947] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    1.909620] [drm] Generation 2 PCI interface, using max accessible memory
[    1.916436] [drm] radeon: VRAM 128M
[    1.919930] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[    1.925610] [drm] radeon: GTT 512M
[    1.929022] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[    1.934635]   alloc irq_desc for 28 on node 0
[    1.934637]   alloc kstat_irqs on node 0
[    1.934640] __assign_irq_vector:assigning irq 28 to vector 113
[    1.940314] radeon 0000:01:00.0: irq 28 for MSI/MSI-X
[    1.940522] [drm] radeon: using MSI.
[    1.944120] [drm] radeon: irq initialized.
[    1.949061] [drm] Detected VRAM RAM=128M, BAR=128M
[    1.953910] [drm] RAM width 64bits DDR
[    1.957756] [TTM] Zone  kernel: Available graphics memory: 2028954 kiB.
[    1.964400] [drm] radeon: 128M of VRAM memory ready
[    1.969275] [drm] radeon: 512M of GTT memory ready.
[    1.974192] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    1.981393] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    1.987280] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[    1.993498] [drm] radeon: cp idle (0x10000C03)
[    1.998072] [drm] Loading R300 Microcode
[    2.002021] platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin
[    2.010102] [drm] radeon: ring at 0x0000000020000000
[    2.015087] [drm] ring test succeeded in 1 usecs
[    2.019790] [drm] radeon: ib pool ready.
[    2.023809] [drm] ib test succeeded in 0 usecs
[    2.028471] [drm] Default TV standard: NTSC
[    2.032676] [drm] 27.000000000 MHz TV ref clk
[    2.037035] [drm] DFP table revision: 4
[    2.041058] [drm] Default TV standard: NTSC
[    2.045248] [drm] 27.000000000 MHz TV ref clk
[    2.049724] [drm] Radeon Display Connectors
[    2.054511] [drm] Connector 0:
[    2.057575] [drm]   VGA
[    2.060047] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    2.066052] [drm]   Encoders:
[    2.069029] [drm]     CRT1: INTERNAL_DAC1
[    2.073073] [drm] Connector 1:
[    2.076130] [drm]   DVI-I
[    2.078759] [drm]   HPD1
[    2.081325] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    2.087331] [drm]   Encoders:
[    2.090329] [drm]     CRT2: INTERNAL_DAC2
[    2.094346] [drm]     DFP1: INTERNAL_TMDS1
[    2.098445] [drm] Connector 2:
[    2.101535] [drm]   S-video
[    2.104341] [drm]   Encoders:
[    2.107315] [drm]     TV1: INTERNAL_DAC2
[    2.331346] No connectors reported conncted with modes
[    2.340666] [drm] fb mappable at 0xE00C0000
[    2.344854] [drm] vram apper at 0xE0000000
[    2.348953] [drm] size 5242880
[    2.352047] [drm] fb depth is 24
[    2.355282] [drm]    pitch is 5120
[    2.409811] [drm] DAC-9: set mode 1280x1024 2d
[    2.460100] [drm] TMDS-12: set mode 1280x1024 32
[    2.470429] Console: switching to colour frame buffer device 160x64
[    2.490678] fb0: radeondrmfb frame buffer device
[    2.495307] registered panic notifier
[    2.498983] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[    2.506460] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    2.512992] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.519328] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.525316] sata_sil24 0000:04:00.0: version 1.1
[    2.525337] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[    2.533990]   alloc irq_desc for 29 on node 0
[    2.533991]   alloc kstat_irqs on node 0
[    2.533994] __assign_irq_vector:assigning irq 29 to vector 121
[    2.539681] sata_sil24 0000:04:00.0: irq 29 for MSI/MSI-X
[    2.539882] sata_sil24 0000:04:00.0: Using MSI
[    2.544372] sata_sil24 0000:04:00.0: setting latency timer to 64
[    2.544601] scsi0 : sata_sil24
[    2.547843] scsi1 : sata_sil24
[    2.551032] ata1: SATA max UDMA/100 host m128@0xefeffc00 port 0xefef8000 irq 29
[    2.558362] ata2: SATA max UDMA/100 host m128@0xefeffc00 port 0xefefa000 irq 29
[    2.565829] sata_nv 0000:00:05.0: version 3.5
[    2.566114] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    2.571896]   alloc irq_desc for 23 on node 0
[    2.571898]   alloc kstat_irqs on node 0
[    2.571900] __assign_irq_vector:assigning irq 23 to vector 129
[    2.577583] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    2.586099] sata_nv 0000:00:05.0: Using SWNCQ mode
[    2.590956] sata_nv 0000:00:05.0: setting latency timer to 64
[    2.591071] scsi2 : sata_nv
[    2.594013] scsi3 : sata_nv
[    2.597018] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23
[    2.604196] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23
[    2.611671] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[    2.617435]   alloc irq_desc for 22 on node 0
[    2.617436]   alloc kstat_irqs on node 0
[    2.617438] __assign_irq_vector:assigning irq 22 to vector 137
[    2.623152] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[    2.631657] sata_nv 0000:00:05.1: Using SWNCQ mode
[    2.636490] sata_nv 0000:00:05.1: setting latency timer to 64
[    2.636618] scsi4 : sata_nv
[    2.639558] scsi5 : sata_nv
[    2.642573] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22
[    2.649726] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22
[    2.657246] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[    2.663034]   alloc irq_desc for 21 on node 0
[    2.663035]   alloc kstat_irqs on node 0
[    2.663037] __assign_irq_vector:assigning irq 21 to vector 145
[    2.668720] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[    2.677237] sata_nv 0000:00:05.2: Using SWNCQ mode
[    2.682085] sata_nv 0000:00:05.2: setting latency timer to 64
[    2.682204] scsi6 : sata_nv
[    2.685148] scsi7 : sata_nv
[    2.688149] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
[    2.695325] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
[    2.703774] pata_amd 0000:00:04.0: version 0.4.1
[    2.703801] pata_amd 0000:00:04.0: setting latency timer to 64
[    2.703870] scsi8 : pata_amd
[    2.708023] scsi9 : pata_amd
[    2.713013] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.721177] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.729649] tg3.c:v3.105 (December 2, 2009)
[    2.735339] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[    2.742377]   alloc irq_desc for 18 on node 0
[    2.742378]   alloc kstat_irqs on node 0
[    2.742380] __assign_irq_vector:assigning irq 18 to vector 153
[    2.748065] tg3 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[    2.758830] tg3 0000:03:00.0: setting latency timer to 64
[    2.804284] eth0: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:17:31:f9:cc:c5
[    2.814661] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    2.823677] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.831501] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.838517] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[    2.845796]   alloc irq_desc for 17 on node 0
[    2.845797]   alloc kstat_irqs on node 0
[    2.845799] __assign_irq_vector:assigning irq 17 to vector 161
[    2.851501] tg3 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[    2.862732] tg3 0000:02:00.0: setting latency timer to 64
[    2.904267] eth1: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:18:f3:44:df:ea
[    2.914878] eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    2.924132] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.932200] eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.939495] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[    2.946971]   alloc irq_desc for 16 on node 0
[    2.946972]   alloc kstat_irqs on node 0
[    2.946974] __assign_irq_vector:assigning irq 16 to vector 169
[    2.952677] ohci1394 0000:05:08.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
[    2.994097] ata5: SATA link down (SStatus 0 SControl 300)
[    3.030040] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[effff800-efffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.031560] ata7: SATA link down (SStatus 0 SControl 300)
[    3.050994] eth1394: eth2: IPv4 over IEEE 1394 (fw-host0)
[    3.058354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.066956] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[    3.074517]   alloc irq_desc for 20 on node 0
[    3.074518]   alloc kstat_irqs on node 0
[    3.074520] __assign_irq_vector:assigning irq 20 to vector 177
[    3.080223] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[    3.092307] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    3.092310] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    3.099314] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    3.103799] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.116552] ehci_hcd 0000:00:02.1: debug port 1
[    3.122923] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    3.122937] ehci_hcd 0000:00:02.1: irq 20, io mem 0xefaebc00
[    3.150011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    3.157565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.166177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.167554] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[    3.167557] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.191968] usb usb1: Product: EHCI Host Controller
[    3.198656] usb usb1: Manufacturer: Linux 2.6.33-rc4 ehci_hcd
[    3.206267] usb usb1: SerialNumber: 0000:00:02.1
[    3.212853] hub 1-0:1.0: USB hub found
[    3.218412] hub 1-0:1.0: 10 ports detected
[    3.224402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.232683] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    3.240267] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    3.250482] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    3.250485] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    3.250855] ata3.00: configured for UDMA/133
[    3.263663] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    3.272930] ohci_hcd 0000:00:02.0: irq 23, io mem 0xefaf8000
[    3.342020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.350663] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.359712] usb usb2: Product: OHCI Host Controller
[    3.366463] usb usb2: Manufacturer: Linux 2.6.33-rc4 ohci_hcd
[    3.374079] usb usb2: SerialNumber: 0000:00:02.0
[    3.380673] hub 2-0:1.0: USB hub found
[    3.386277] hub 2-0:1.0: 10 ports detected
[    3.392318] Initializing USB Mass Storage driver...
[    3.399151] usbcore: registered new interface driver usb-storage
[    3.407022] USB Mass Storage support registered.
[    3.413554] usbcore: registered new interface driver libusual
[    3.421199] usbcore: registered new interface driver ums-alauda
[    3.429002] usbcore: registered new interface driver ums-cypress
[    3.436892] usbcore: registered new interface driver ums-datafab
[    3.444734] usbcore: registered new interface driver ums-freecom
[    3.452528] usbcore: registered new interface driver ums-isd200
[    3.460200] usbcore: registered new interface driver ums-jumpshot
[    3.468030] usbcore: registered new interface driver ums-karma
[    3.475573] usbcore: registered new interface driver ums-sddr09
[    3.483198] usbcore: registered new interface driver ums-sddr55
[    3.490782] usbcore: registered new interface driver ums-usbat
[    3.498312] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    3.509607] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.516148] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.522911] mice: PS/2 mouse device common for all mice
[    3.529987] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    3.538154] I2O subsystem v1.325
[    3.542925] i2o: max drivers = 8
[    3.547906] i2c /dev entries driver
[    3.550247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    3.563330] i2c i2c-2: nForce2 SMBus adapter at 0x2a00
[    3.570063] i2c i2c-3: nForce2 SMBus adapter at 0x2a80
[    3.576695] Linux video capture interface: v2.00
[    3.583131] bttv: driver version 0.9.18 loaded
[    3.588989] bttv: using 8 buffers with 2080k (520 pages) each for capture
[    3.597319] bttv: Bt8xx card found (0).
[    3.602851] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[    3.610024] bttv 0000:05:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[    3.619447] bttv0: Bt878 (rev 17) at 0000:05:06.0, irq: 19, latency: 64, mmio: 0xeefff000
[    3.629106] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[    3.638396] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[    3.646041] IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[    3.654249] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[    3.656748] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[    3.694025] tveeprom 4-0050: Hauppauge model 61344, rev D421, serial# 3902813
[    3.702670] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5)
[    3.711117] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04)
[    3.718585] tveeprom 4-0050: audio processor is MSP3415 (idx 6)
[    3.725990] tveeprom 4-0050: has radio
[    3.731197] bttv0: Hauppauge eeprom indicates model#61344
[    3.738043] bttv0: tuner type=5
[    3.747797] msp3400 4-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
[    3.755655] msp3400 4-0040: msp3400 supports nicam, mode is autodetect
[    3.766917] tuner 4-0061: chip found @ 0xc2 (bt878 #0 [sw])
[    3.774228] tuner-simple 4-0061: creating new instance
[    3.780833] tuner-simple 4-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[    3.783771] usb 2-9: new low speed USB device using ohci_hcd and address 2
[    3.799410] bttv0: registered device video0
[    3.805125] bttv0: registered device vbi0
[    3.810647] bttv0: registered device radio0
[    3.824743] bttv0: PLL: 28636363 => 35468950 .. ok
[    3.862610] input: i2c IR (Hauppauge) as /devices/virtual/input/input4
[    3.870646] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-4/4-0018/ir0 [bt878 #0 [sw]]
[    3.998030] usb 2-9: New USB device found, idVendor=062a, idProduct=0000
[    4.006231] usb 2-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.373902] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000c4c261]
[    4.712553] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    4.722361] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[    4.732153] md: raid1 personality registered for level 1
[    4.739152] device-mapper: uevent: version 1.0.3
[    4.745337] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@xxxxxxxxxx
[    4.755348] EDAC MC: Ver: 2.1.0 Jan 13 2010
[    4.761195] EDAC amd64_edac:  Ver: 3.3.0 Jan 13 2010
[    4.767749] EDAC amd64: ECC is enabled by BIOS.
[    4.773906] EDAC amd64: ECC is enabled by BIOS.
[    4.780060] EDAC MC: Rev F or later detected
[    4.780070] EDAC MC: DCT0 chip selects:
[    4.780072] EDAC MC:  0:  1024MB 1:  1024MB
[    4.780073] EDAC MC:  2:     0MB 3:     0MB
[    4.780074] EDAC MC:  4:     0MB 5:     0MB
[    4.780076] EDAC MC:  6:     0MB 7:     0MB
[    4.780188] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[    4.781282] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    4.787633] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[    4.787635] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.794063] ata1.00: configured for UDMA/100
[    4.794170] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD642JJ  1AA0 PQ: 0 ANSI: 5
[    4.794433] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    4.794472] sd 0:0:0:0: [sda] Write Protect is off
[    4.794474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.794489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.855052] EDAC MC: Rev F or later detected
[    4.855059] EDAC MC: DCT0 chip selects:
[    4.855060] EDAC MC:  0:  1024MB 1:  1024MB
[    4.855061] EDAC MC:  2:     0MB 3:     0MB
[    4.855063] EDAC MC:  4:     0MB 5:     0MB
[    4.855064] EDAC MC:  6:     0MB 7:     0MB
[    4.855141]  sda:
[    4.856996] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
[    4.868108] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[    4.881193] cpuidle: using governor ladder
[    4.887089] cpuidle: using governor menu
[    4.892809]  sda1 sda2 sda3
[    4.897859] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.898791] usbcore: registered new interface driver hiddev
[    4.904305] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input5
[    4.904465] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-9/input0
[    4.904514] usbcore: registered new interface driver usbhid
[    4.904515] usbhid: USB HID core driver
[    4.904575] Advanced Linux Sound Architecture Driver Version 1.0.21.
[    4.956655] Bt87x 0000:05:06.1: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[    4.966776] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[    4.975376] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[    4.982962] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[    4.993274]   alloc irq_desc for 30 on node 0
[    4.993276]   alloc kstat_irqs on node 0
[    4.993279] __assign_irq_vector:assigning irq 30 to vector 185
[    4.998961] HDA Intel 0000:00:06.1: irq 30 for MSI/MSI-X
[    5.001008] HDA Intel 0000:00:06.1: setting latency timer to 64
[    6.340416] ALSA device list:
[    6.345258]   #0: HDA NVidia at 0xefafc000 irq 30
[    6.351771]   #1: Brooktree Bt878 at 0xeeffe000, irq 19
[    6.359089] Initializing XFRM netlink socket
[    6.365186] NET: Registered protocol family 17
[    6.371447] NET: Registered protocol family 15
[    6.377749] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00)
[    6.390186] powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0x8
[    6.397717] powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xa
[    6.405221] powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xc
[    6.412622] powernow-k8:    3 : fid 0xc (2000 MHz), vid 0xe
[    6.419984] powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
[    6.427450] powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
[    6.435435] powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0x8
[    6.442835] powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xa
[    6.450189] powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xc
[    6.457499] powernow-k8:    3 : fid 0xc (2000 MHz), vid 0xe
[    6.464794] powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
[    6.472141] powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
[    7.010041] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    7.026736] ata2.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[    7.036976] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    7.054501] ata2.00: configured for UDMA/100
[    7.063056] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD642JJ  1AA0 PQ: 0 ANSI: 5
[    7.075942] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    7.076267] scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[    7.076745] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    7.076844] sd 2:0:0:0: [sdc] Write Protect is off
[    7.076848] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    7.076916] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.077161]  sdc: sdc1 sdc2
[    7.141816] sd 1:0:0:0: [sdb] Write Protect is off
[    7.142268] sd 2:0:0:0: [sdc] Attached SCSI disk
[    7.159998] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    7.160048] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.173756]  sdb: sdb1 sdb2 sdb3
[    7.199871] sd 1:0:0:0: [sdb] Attached SCSI disk
[    7.410464] ata4: SATA link down (SStatus 0 SControl 300)
[    7.763038] ata6: SATA link down (SStatus 0 SControl 300)
[    8.114285] ata8: SATA link down (SStatus 0 SControl 300)
[    8.124054] ata10: port disabled. ignoring.
[    8.124109] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    8.156144] XFS mounting filesystem sdc1
[    8.209109] Ending clean XFS mount for filesystem: sdc1
[    8.209185] VFS: Mounted root (xfs filesystem) readonly on device 8:33.
[    8.220112] Freeing unused kernel memory: 1208k freed
[    9.812834] udev: starting version 146
[    9.912024] udev: renamed network interface eth2 to eth4
[   19.135631]   alloc irq_desc for 31 on node 0
[   19.135639]   alloc kstat_irqs on node 0
[   19.135646] __assign_irq_vector:assigning irq 31 to vector 193
[   19.135663] tg3 0000:03:00.0: irq 31 for MSI/MSI-X
[   22.326847] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[   22.326854] tg3: eth0: Flow control is on for TX and on for RX.
[   23.434378]   alloc irq_desc for 32 on node 0
[   23.434386]   alloc kstat_irqs on node 0
[   23.434393] __assign_irq_vector:assigning irq 32 to vector 201
[   23.434410] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
[   26.104711] tg3: eth1: Link is up at 1000 Mbps, full duplex.
[   26.104718] tg3: eth1: Flow control is on for TX and on for RX.
[   81.629547] XFS mounting filesystem sdb2
[   81.705819] Starting XFS recovery on filesystem: sdb2 (logdev: internal)
[   81.740975] Ending XFS recovery on filesystem: sdb2 (logdev: internal)
[  100.664581] do_IRQ: 0.165 No irq handler for vector (irq -1)
[  100.664598] do_IRQ: 1.165 No irq handler for vector (irq -1)
[  100.664619] do_IRQ: 3.165 No irq handler for vector (irq -1)
[  100.664632] do_IRQ: 2.165 No irq handler for vector (irq -1)
[  130.980054] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[  130.980065] ata2.00: failed command: READ FPDMA QUEUED
[  130.980077] ata2.00: cmd 60/00:00:ad:9b:da/01:00:01:00:00/40 tag 0 ncq 131072 in
[  130.980080]          res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[  130.980085] ata2.00: status: { DRDY }
[  130.980090] ata2.00: failed command: READ FPDMA QUEUED
[  130.980099] ata2.00: cmd 60/00:08:ad:9c:da/01:00:01:00:00/40 tag 1 ncq 131072 in
[  130.980101]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  130.980106] ata2.00: status: { DRDY }
[  130.980115] ata2: hard resetting link
[  133.180056] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  133.184995] do_IRQ: 3.165 No irq handler for vector (irq -1)
[  133.185006] do_IRQ: 0.165 No irq handler for vector (irq -1)
[  133.185020] do_IRQ: 1.165 No irq handler for vector (irq -1)
[  133.185032] do_IRQ: 2.165 No irq handler for vector (irq -1)
[  138.180036] ata2.00: qc timeout (cmd 0xec)
[  138.180045] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  138.180049] ata2.00: revalidation failed (errno=-5)
[  138.180056] ata2: hard resetting link
[  140.380051] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  150.380032] ata2.00: qc timeout (cmd 0xec)
[  150.380039] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  150.380044] ata2.00: revalidation failed (errno=-5)
[  150.380049] ata2: limiting SATA link speed to 1.5 Gbps
[  150.380054] ata2: hard resetting link
[  152.580051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  152.585120] ata2.00: failed to read native max address (err_mask=0x1)
[  152.585125] ata2.00: HPA support seems broken, skipping HPA handling
[  157.580030] ata2.00: qc timeout (cmd 0xef)
[  157.580039] ata2.00: failed to set xfermode (err_mask=0x4)
[  157.580044] ata2.00: disabled
[  157.580058] ata2.00: device reported invalid CHS sector 0
[  157.580071] ata2: hard resetting link
[  159.783796] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  159.783811] ata2: EH complete
[  159.783834] sd 1:0:0:0: [sdb] Unhandled error code
[  159.783838] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  159.783844] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 01 da 9c ad 00 01 00 00
[  159.783859] end_request: I/O error, dev sdb, sector 31104173
[  159.783879] sd 1:0:0:0: [sdb] Unhandled error code
[  159.783882] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  159.783888] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 01 da 9b ad 00 01 00 00
[  159.783900] end_request: I/O error, dev sdb, sector 31103917
[  159.783985] sd 1:0:0:0: [sdb] READ CAPACITY(16) failed
[  159.783989] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  159.783995] sd 1:0:0:0: [sdb] Sense not available.
[  159.784042] sd 1:0:0:0: [sdb] READ CAPACITY failed
[  159.784046] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  159.784051] sd 1:0:0:0: [sdb] Sense not available.
[  159.784120] sd 1:0:0:0: [sdb] Asking for cache data failed
[  159.784125] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[  159.784137] sdb: detected capacity change from 640135028736 to 0

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux