LG GH22NS40 NL01 (possibly Renesas chipset)
VIA8237 SATA (produces basically same errors), Promise SATA II 150 20579 HBAs.
Linux 2.6.32.2
hal polling
devkit polling
wodim
growisofs
port_status 0x20280000 (Data Transfer Overrun Error & Target Device Fault)?
Looks like a hardware combination incompatibility.
Most applicable ATA_HORKAGES in sourcecode already tried.
Not found the sense code yet since FEATURE specific according to T13/1410D revision 3b.
Comments?
y
tom
dmesg |grep -A 10 ata
sata_promise 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
scsi5 : sata_promise
scsi6 : sata_promise
scsi7 : sata_promise
ata6: SATA max UDMA/133 mmio m4096@0xfbefe000 ata 0xfbefe200 irq 17
ata7: SATA max UDMA/133 mmio m4096@0xfbefe000 ata 0xfbefe280 irq 17
ata8: PATA max UDMA/133 mmio m4096@0xfbefe000 ata 0xfbefe300 irq 17
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
ata7: SATA link down (SStatus 0 SControl 300)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 40 00
ata6.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 0 dma 131072 in
res 51/54:03:00:00:fc/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
...
<period, ~10 times in series>
...
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
ata6.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
res 51/54:03:00:00:10/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
ata6.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
res 51/54:03:00:00:10/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
ata6.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
res 51/54:03:00:00:10/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
sr 5:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 5:0:0:0: [sr0] Sense Key : 0x5 [current]
Info fld=0x0
sr 5:0:0:0: [sr0] ASC=0x21 ASCQ=0x0
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
ata6: EH complete
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
