Mike Cui reported that his system with an NVIDIA MCP79 (aka MCP7A) chipset stopped working with 2.6.32. The problem appears to be that 2.6.32 now enables the FPDMA auto-activate optimization in the ahci driver. The drive works fine with this enabled on an Intel AHCI so this appears to be a chipset bug. Since MCP79 is a fairly recent NVIDIA chipset and we don't have any info on whether any other NVIDIA chipsets have this issue, disable FPDMA AA optimization on all NVIDIA AHCI controllers for now. Should address http://bugzilla.kernel.org/show_bug.cgi?id=14922 Signed-off-by: Robert Hancock <hancockrwd@xxxxxxxxx> --- Mike, can you test this out and make sure this resolves the problem for you? diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index b8bea10..47e57dc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -3067,8 +3067,16 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ahci_save_initial_config(pdev, hpriv); /* prepare host */ - if (hpriv->cap & HOST_CAP_NCQ) - pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA; + if (hpriv->cap & HOST_CAP_NCQ) { + pi.flags |= ATA_FLAG_NCQ; + /* Auto-activate optimization is supposed to be supported on + all AHCI controllers indicating NCQ support, but it seems + to be broken at least on some NVIDIA MCP79 chipsets. + Until we get info on which NVIDIA chipsets don't have this + issue, if any, disable AA on all NVIDIA AHCIs. */ + if (pdev->vendor != PCI_VENDOR_ID_NVIDIA) + pi.flags |= ATA_FLAG_FPDMA_AA; + } if (hpriv->cap & HOST_CAP_PMP) pi.flags |= ATA_FLAG_PMP; -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
