http://bugzilla.kernel.org/show_bug.cgi?id=10239 ------- Comment #4 from richard.genoud@xxxxxxxxx 2008-03-14 01:30 ------- > Please confirm that I get this correctly - if the drive is plugged as master > and configured by _jumpers_ as master it also fails? > [ Also: is the drive connected to the "other" cable end (_not_ in the middle) > when used as master? ] yep! doesn't work: IDE drive configured by jumper as master AND connected to the end of the cable. does work: IDE drive configured by jumper as slave AND connected to the middle of the cable. By the way, the presence of another drive on the cable doesn't seem to change anything. [I didn't try: IDE drive configured by jumper as master AND connected to the middle of the cable. IDE drive configured by jumper as slave AND connected to the end of the cable. but I can try if you want] And the calbe I use is a 80 connector. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
