Andy Sturrock <linux-kernel <at> sturrock.org> writes: > > Hi Jeff, > > The patch you submitted back in May 2007 you called "Add Marvell 6141 > .. > Initially all seems fine, I can see the attached drives in /dev and > fdisk and mkfs.ext3 seem to work OK. > Then I tried putting the drives into a RAID 5 array using > mdadm and it all went pear-shaped - see output from dmesg etc attached. Hi Andy, I am not Jeff, unforturnately... :) But I just wanted to confirm that what you have seen is exactly what I learned and posted last summer (2007-08-04 10:11:48 GMT). At the time, I tried all kernels and branches I could get my hands on. Also I would not mind helping, but similar to you, I have not any knowledge about the sata subsystem. But I can certainly test etc. In order to get into trouble, it seams that exercising more than one disk at the same time on the interface "does it". - i.e. one doesn't have to go raid. Regards, Micael -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
