Since we don't do pipeline read-ahead anymore, we don't have to look for
filemarks we have crossed. Therefore, remove the code chunk that does that and
pass on the command to the tape. As a side effect, remove unused
idetape_wait_first_stage().
Signed-off-by: Borislav Petkov <petkovbb@xxxxxxxxx>
---
drivers/ide/ide-tape.c | 52 ------------------------------------------------
1 files changed, 0 insertions(+), 52 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d4a94d5..3b324bb 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1983,19 +1983,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
pc->idetape_callback = &idetape_pc_callback;
}
-static void idetape_wait_first_stage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- unsigned long flags;
-
- if (tape->first_stage == NULL)
- return;
- spin_lock_irqsave(&tape->lock, flags);
- if (tape->active_stage == tape->first_stage)
- idetape_wait_for_request(drive, tape->active_data_rq);
- spin_unlock_irqrestore(&tape->lock, flags);
-}
-
/* Queue up a character device originated write request. */
static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
{
@@ -2221,19 +2208,11 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
return 0;
}
-/*
- * The function below is now a bit more complicated than just passing the
- * command to the tape since we may have crossed some filemarks during our
- * pipelined read-ahead mode. As a minor side effect, the pipeline enables us to
- * support MTFSFM when the filemark is in our internal pipeline even if the tape
- * doesn't support spacing over filemarks in the reverse direction.
- */
static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
- unsigned long flags;
int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
@@ -2246,42 +2225,11 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
}
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
- /* its a read-ahead buffer, scan it for crossed filemarks. */
tape->merge_stage_size = 0;
if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
++count;
- while (tape->first_stage != NULL) {
- if (count == mt_count) {
- if (mt_op == MTFSFM)
- set_bit(IDETAPE_FLAG_FILEMARK,
- &tape->flags);
- return 0;
- }
- spin_lock_irqsave(&tape->lock, flags);
- if (tape->first_stage == tape->active_stage) {
- /*
- * We have reached the active stage in the read
- * pipeline. There is no point in allowing the
- * drive to continue reading any farther, so we
- * stop the pipeline.
- */
- tape->next_stage = NULL;
- spin_unlock_irqrestore(&tape->lock, flags);
- idetape_wait_first_stage(drive);
- tape->next_stage = tape->first_stage->next;
- } else
- spin_unlock_irqrestore(&tape->lock, flags);
- if (tape->first_stage->rq.errors ==
- IDETAPE_ERROR_FILEMARK)
- ++count;
- idetape_remove_stage_head(drive);
- }
}
- /*
- * The filemark was not found in our internal pipeline; now we can issue
- * the space command.
- */
switch (mt_op) {
case MTFSF:
case MTBSF:
--
1.5.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
