* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
and update Documentation/ide/ide.txt.
* Remove no longer needed ide_forced chipset type.
v2:
* is_chipset_set[] -> is_chipset_set in ide.c.
* Documentation/ide/ide.txt fix.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
replacement patch
Documentation/ide/ide.txt | 33 +--------------------------------
drivers/ide/ide-generic.c | 3 +--
drivers/ide/ide-probe.c | 3 +--
drivers/ide/ide-proc.c | 3 ---
drivers/ide/ide.c | 41 ++++++++++++-----------------------------
drivers/ide/pci/cmd640.c | 2 +-
drivers/ide/setup-pci.c | 11 -----------
include/linux/ide.h | 2 +-
8 files changed, 17 insertions(+), 81 deletions(-)
Index: b/Documentation/ide/ide.txt
===================================================================
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -71,29 +71,6 @@ This driver automatically probes for mos
ones), for the drives/geometries attached to those interfaces, and for the IRQ
lines being used by the interfaces (normally 14, 15 for ide0/ide1).
-For special cases, interfaces may be specified using kernel "command line"
-options. For example,
-
- ide3=0x168,0x36e,10 /* ioports 0x168-0x16f,0x36e, irq 10 */
-
-Normally the irq number need not be specified, as ide.c will probe for it:
-
- ide3=0x168,0x36e /* ioports 0x168-0x16f,0x36e */
-
-The standard port, and irq values are these:
-
- ide0=0x1f0,0x3f6,14
- ide1=0x170,0x376,15
- ide2=0x1e8,0x3ee,11
- ide3=0x168,0x36e,10
-
-Note that the first parameter reserves 8 contiguous ioports, whereas the
-second value denotes a single ioport. If in doubt, do a 'cat /proc/ioports'.
-
-In all probability the device uses these ports and IRQs if it is attached
-to the appropriate ide channel. Pass the parameter for the correct ide
-channel to the kernel, as explained above.
-
Any number of interfaces may share a single IRQ if necessary, at a slight
performance penalty, whether on separate cards or a single VLB card.
The IDE driver automatically detects and handles this. However, this may
@@ -206,7 +183,7 @@ When ide.c is used as a module, you can
driver using the "options=" keyword to insmod, while replacing any ',' with
';'. For example:
- insmod ide.o options="ide0=serialize ide1=serialize ide2=0x1e8;0x3ee;11"
+ insmod ide.o options="hda=nodma hdb=nodma"
================================================================================
@@ -258,14 +235,6 @@ Summary of ide driver parameters for ker
As for VLB, it is safest to not specify it.
Bigger values are safer than smaller ones.
- "idex=base" : probe for an interface at the addr specified,
- where "base" is usually 0x1f0 or 0x170
- and "ctl" is assumed to be "base"+0x206
-
- "idex=base,ctl" : specify both base and ctl
-
- "idex=base,ctl,irq" : specify base, ctl, and irq number
-
"idex=serialize" : do not overlap operations on idex. Please note
that you will have to specify this option for
both the respective primary and secondary channel
Index: b/drivers/ide/ide-generic.c
===================================================================
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -93,8 +93,7 @@ static int __init ide_generic_init(void)
ide_hwif_t *hwif = &ide_hwifs[i];
if (hwif->io_ports[IDE_DATA_OFFSET] &&
- (hwif->chipset == ide_unknown ||
- hwif->chipset == ide_forced))
+ hwif->chipset == ide_unknown)
idx[i] = i;
else
idx[i] = 0xff;
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1515,8 +1515,7 @@ int ide_device_add_all(u8 *idx, const st
hwif = &ide_hwifs[idx[i]];
if (hwif->present) {
- if (hwif->chipset == ide_unknown ||
- hwif->chipset == ide_forced)
+ if (hwif->chipset == ide_unknown)
hwif->chipset = ide_generic;
hwif_register_devices(hwif);
}
Index: b/drivers/ide/ide-proc.c
===================================================================
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -46,9 +46,6 @@ static int proc_ide_read_imodel
int len;
const char *name;
- /*
- * Neither ide_unknown nor ide_forced should be set at this point.
- */
switch (hwif->chipset) {
case ide_generic: name = "generic"; break;
case ide_pci: name = "pci"; break;
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1172,7 +1172,7 @@ extern int probe_ht6560b;
extern int probe_qd65xx;
extern int cmd640_vlb;
-static int __initdata is_chipset_set[MAX_HWIFS];
+static int __initdata is_chipset_set;
/*
* ide_setup() gets called VERY EARLY during initialization,
@@ -1338,8 +1338,6 @@ static int __init ide_setup(char *s)
"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
"dtc2278", "umc8672", "ali14xx", NULL };
- hw_regs_t hwregs;
-
hw = s[3] - '0';
hwif = &ide_hwifs[hw];
i = match_parm(&s[4], ide_words, vals, 3);
@@ -1348,19 +1346,14 @@ static int __init ide_setup(char *s)
* Cryptic check to ensure chipset not already set for hwif.
* Note: we can't depend on hwif->chipset here.
*/
- if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
+ if (i >= -18 && i <= -11) {
/* chipset already specified */
- if (is_chipset_set[hw])
+ if (is_chipset_set)
goto bad_option;
- if (i > -18 && i <= -11) {
- /* these drivers are for "ide0=" only */
- if (hw != 0)
- goto bad_hwif;
- /* chipset already specified for 2nd port */
- if (is_chipset_set[hw+1])
- goto bad_option;
- }
- is_chipset_set[hw] = 1;
+ /* these drivers are for "ide0=" only */
+ if (hw != 0)
+ goto bad_hwif;
+ is_chipset_set = 1;
printk("\n");
}
@@ -1440,21 +1433,11 @@ static int __init ide_setup(char *s)
case -1: /* "noprobe" */
hwif->noprobe = 1;
goto obsolete_option;
-
- case 1: /* base */
- vals[1] = vals[0] + 0x206; /* default ctl */
- case 2: /* base,ctl */
- vals[2] = 0; /* default irq = probe for it */
- case 3: /* base,ctl,irq */
- memset(&hwregs, 0, sizeof(hwregs));
- ide_init_hwif_ports(&hwregs, vals[0], vals[1], &hwif->irq);
- memcpy(hwif->io_ports, hwregs.io_ports, sizeof(hwif->io_ports));
- hwif->irq = vals[2];
- hwif->noprobe = 0;
- hwif->chipset = ide_forced;
- goto obsolete_option;
-
- case 0: goto bad_option;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ goto bad_option;
default:
printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
return 1;
Index: b/drivers/ide/pci/cmd640.c
===================================================================
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -415,7 +415,7 @@ static void __init setup_device_ptrs (vo
cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */
for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif = &ide_hwifs[i];
- if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) {
+ if (hwif->chipset == ide_unknown) {
if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0)
cmd_hwif0 = hwif;
else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170)
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -41,17 +41,6 @@ static ide_hwif_t *ide_match_hwif(unsign
ide_hwif_t *hwif;
/*
- * Look for a hwif with matching io_base specified using
- * parameters to ide_setup().
- */
- for (h = 0; h < MAX_HWIFS; ++h) {
- hwif = &ide_hwifs[h];
- if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) {
- if (hwif->chipset == ide_forced)
- return hwif; /* a perfect match */
- }
- }
- /*
* Look for a hwif with matching io_base default value.
* If chipset is "ide_unknown", then claim that hwif slot.
* Otherwise, some other chipset has already claimed it.. :(
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -169,7 +169,7 @@ enum { ide_unknown, ide_generic, ide_pc
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_au1xxx, ide_palm3710, ide_forced
+ ide_au1xxx, ide_palm3710
};
typedef u8 hwif_chipset_t;
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
