* Make sl82c105_bridge_revision() return 'u8' instead of 'unsigned long'. * Check bridge revision in sl82c105_init_one(). While at: * Use proper KERN_ level for printk(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- drivers/ide/pci/sl82c105.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) Index: b/drivers/ide/pci/sl82c105.c =================================================================== --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -232,7 +232,7 @@ static void sl82c105_resetproc(ide_drive * Return the revision of the Winbond bridge * which this function is part of. */ -static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) +static u8 sl82c105_bridge_revision(struct pci_dev *dev) { struct pci_dev *bridge; @@ -287,27 +287,11 @@ static unsigned int __devinit init_chips */ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned int rev; - DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); if (!hwif->dma_base) return; - rev = sl82c105_bridge_revision(dev); - if (rev <= 5) { - /* - * Never ever EVER under any circumstances enable - * DMA when the bridge is this old. - */ - printk(" %s: Winbond W83C553 bridge revision %d, " - "BM-DMA disabled\n", hwif->name, rev); - return; - } - - hwif->mwdma_mask = ATA_MWDMA2; - hwif->dma_lost_irq = &sl82c105_dma_lost_irq; hwif->dma_start = &sl82c105_dma_start; hwif->ide_dma_end = &sl82c105_dma_end; @@ -337,11 +321,26 @@ static const struct ide_port_info sl82c1 #endif IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, }; static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &sl82c105_chipset); + struct ide_port_info d = sl82c105_chipset; + u8 rev = sl82c105_bridge_revision(dev); + + if (rev <= 5) { + /* + * Never ever EVER under any circumstances enable + * DMA when the bridge is this old. + */ + printk(KERN_INFO "W82C105_IDE: Winbond W83C553 bridge " + "revision %d, BM-DMA disabled\n", rev); + d.init_hwif = NULL; + d.mwdma_mask = 0; + } + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id sl82c105_pci_tbl[] = { -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html