* Remove obsoleted "idebus=" kernel parameter.
* Remove no longer needed ide_system_bus_speed() and system_bus_clock()
(together with idebus_parameter and system_bus_speed variables).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ide.c | 71 -------------------------------------------
drivers/ide/legacy/ali14xx.c | 2 -
drivers/ide/legacy/ht6560b.c | 2 -
drivers/ide/legacy/qd65xx.c | 4 +-
drivers/ide/pci/aec62xx.c | 2 -
drivers/ide/pci/alim15x3.c | 2 -
drivers/ide/pci/amd74xx.c | 2 -
drivers/ide/pci/cmd640.c | 8 +---
drivers/ide/pci/cmd64x.c | 4 +-
drivers/ide/pci/cy82c693.c | 2 -
drivers/ide/pci/opti621.c | 2 -
drivers/ide/pci/via82cxxx.c | 2 -
include/linux/ide.h | 2 -
13 files changed, 16 insertions(+), 89 deletions(-)
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -86,9 +86,6 @@ static const u8 ide_hwif_to_major[] = {
IDE6_MAJOR, IDE7_MAJOR,
IDE8_MAJOR, IDE9_MAJOR };
-static int idebus_parameter; /* holds the "idebus=" parameter */
-static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */
-
DEFINE_MUTEX(ide_cfg_mtx);
__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
@@ -195,38 +192,6 @@ static void __init init_ide_data (void)
}
}
-/**
- * ide_system_bus_speed - guess bus speed
- *
- * ide_system_bus_speed() returns what we think is the system VESA/PCI
- * bus speed (in MHz). This is used for calculating interface PIO timings.
- * The default is 40 for known PCI systems, 50 otherwise.
- * The "idebus=xx" parameter can be used to override this value.
- * The actual value to be used is computed/displayed the first time
- * through. Drivers should only use this as a last resort.
- *
- * Returns a guessed speed in MHz.
- */
-
-static int ide_system_bus_speed(void)
-{
-#ifdef CONFIG_PCI
- static struct pci_device_id pci_default[] = {
- { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
- { }
- };
-#else
-#define pci_default 0
-#endif /* CONFIG_PCI */
-
- /* user supplied value */
- if (idebus_parameter)
- return idebus_parameter;
-
- /* safe default value for PCI or VESA and PCI*/
- return pci_dev_present(pci_default) ? 33 : 50;
-}
-
void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
{
ide_hwgroup_t *hwgroup = hwif->hwgroup;
@@ -546,20 +511,6 @@ static int set_unmaskirq(ide_drive_t *dr
return 0;
}
-/**
- * system_bus_clock - clock guess
- *
- * External version of the bus clock guess used by very old IDE drivers
- * for things like VLB timings. Should not be used.
- */
-
-int system_bus_clock (void)
-{
- return system_bus_speed;
-}
-
-EXPORT_SYMBOL(system_bus_clock);
-
static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
ide_drive_t *drive = dev->driver_data;
@@ -854,7 +805,7 @@ static int __init ide_setup(char *s)
if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */
return 0; /* driver and not us */
- if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
+ if (strncmp(s, "ide", 3) && strncmp(s, "hd", 2))
return 0;
printk(KERN_INFO "ide_setup: %s", s);
@@ -957,21 +908,6 @@ static int __init ide_setup(char *s)
}
}
- if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
- goto bad_option;
- /*
- * Look for bus speed option: "idebus="
- */
- if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
- if (match_parm(&s[6], NULL, vals, 1) != 1)
- goto bad_option;
- if (vals[0] >= 20 && vals[0] <= 66) {
- idebus_parameter = vals[0];
- } else
- printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
- goto obsolete_option;
- }
-
bad_option:
printk(" -- BAD OPTION\n");
return 1;
@@ -1168,11 +1104,6 @@ static int __init ide_init(void)
int ret;
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
- system_bus_speed = ide_system_bus_speed();
-
- printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
- "for PIO modes%s\n", system_bus_speed,
- idebus_parameter ? "" : "; override with idebus=xx");
ret = bus_register(&ide_bus_type);
if (ret < 0) {
Index: b/drivers/ide/legacy/ali14xx.c
===================================================================
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -116,7 +116,7 @@ static void ali14xx_set_pio_mode(ide_dri
int time1, time2;
u8 param1, param2, param3, param4;
unsigned long flags;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
/* calculate timing, according to PIO mode */
time1 = ide_pio_cycle_time(drive, pio);
Index: b/drivers/ide/legacy/ht6560b.c
===================================================================
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -212,7 +212,7 @@ static u8 ht_pio2timings(ide_drive_t *dr
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
if (pio) {
unsigned int cycle_time;
Index: b/drivers/ide/legacy/qd65xx.c
===================================================================
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -112,7 +112,7 @@ static void qd65xx_select(ide_drive_t *d
static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
{
- int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
u8 act_cyc, rec_cyc;
if (clk <= 33) {
@@ -134,7 +134,7 @@ static u8 qd6500_compute_timing (ide_hwi
static u8 qd6580_compute_timing (int active_time, int recovery_time)
{
- int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
u8 act_cyc, rec_cyc;
act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17);
Index: b/drivers/ide/pci/aec62xx.c
===================================================================
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -140,7 +140,7 @@ static void aec_set_pio_mode(ide_drive_t
static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
{
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
if (bus_speed <= 33)
pci_set_drvdata(dev, (void *) aec6xxx_33_base);
Index: b/drivers/ide/pci/alim15x3.c
===================================================================
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -294,7 +294,7 @@ static void ali_set_pio_mode(ide_drive_t
int s_time, a_time, c_time;
u8 s_clc, a_clc, r_clc;
unsigned long flags;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
int port = hwif->channel ? 0x5c : 0x58;
int portFIFO = hwif->channel ? 0x55 : 0x54;
u8 cd_dma_fifo = 0;
Index: b/drivers/ide/pci/amd74xx.c
===================================================================
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -179,7 +179,7 @@ static unsigned int __devinit init_chips
* Determine the system bus clock.
*/
- amd_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000;
+ amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
switch (amd_clock) {
case 33000: amd_clock = 33333; break;
Index: b/drivers/ide/pci/cmd640.c
===================================================================
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -554,12 +554,10 @@ static void cmd640_set_mode(ide_drive_t
u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
int bus_speed;
- if (cmd640_vlb && ide_vlb_clk)
- bus_speed = ide_vlb_clk;
- else if (!cmd640_vlb && ide_pci_clk)
- bus_speed = ide_pci_clk;
+ if (cmd640_vlb)
+ bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
else
- bus_speed = system_bus_clock();
+ bus_speed = ide_pci_clk ? ide_pci_clk : 33;
if (pio_mode > 5)
pio_mode = 5;
Index: b/drivers/ide/pci/cmd64x.c
===================================================================
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -69,7 +69,7 @@ static u8 quantize_timing(int timing, in
static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock());
+ int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33);
u8 cycle_count, active_count, recovery_count, drwtim;
static const u8 recovery_values[] =
{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
@@ -128,7 +128,7 @@ static void cmd64x_tune_pio(ide_drive_t
ide_pio_timings[pio].active_time);
setup_count = quantize_timing(ide_pio_timings[pio].setup_time,
- 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock()));
+ 1000 / (ide_pci_clk ? ide_pci_clk : 33));
/*
* The primary channel has individual address setup timing registers
Index: b/drivers/ide/pci/cy82c693.c
===================================================================
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -134,7 +134,7 @@ static int calc_clk(int time, int bus_sp
static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
{
int clk1, clk2;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
/* we don't check against CY82C693's min and max speed,
* so you can play with the idebus=xx parameter
Index: b/drivers/ide/pci/opti621.c
===================================================================
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -209,7 +209,7 @@ static void compute_clocks(int pio, pio_
{
if (pio != PIO_NOT_EXIST) {
int adr_setup, data_pls;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
adr_setup = ide_pio_timings[pio].setup_time;
data_pls = ide_pio_timings[pio].active_time;
Index: b/drivers/ide/pci/via82cxxx.c
===================================================================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -340,7 +340,7 @@ static unsigned int __devinit init_chips
* Determine system bus clock.
*/
- via_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000;
+ via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
switch (via_clock) {
case 33000: via_clock = 33333; break;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -978,8 +978,6 @@ int ide_taskfile_ioctl(ide_drive_t *, un
int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
-extern int system_bus_clock(void);
-
extern int ide_driveid_update(ide_drive_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
extern u8 eighty_ninty_three (ide_drive_t *);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
