Hello again. :-)
Bartlomiej Zolnierkiewicz wrote:
Add struct ide_dma_ops and convert core code + drivers to use it.
While at it:
* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.
I have expect you to drop the prefix from the method implementations which
didn't happen...
* siimage.c:
- add siimage_ide_dma_test_irq() helper
... at least you shouldn't have added the new ones. :-)
- print SATA warning in siimage_init_one()
* Remove no longer needed ->init_hwif implementations.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
I'd expect some init code weight loss at the expense of one more
indirection when calling the methods... :-)
Unfortunately, the patch is not entirely correct...
Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
[...]
@@ -929,7 +929,7 @@ static ide_startstop_t cdrom_newpc_intr(
dma = info->dma;
if (dma) {
info->dma = 0;
- dma_error = HWIF(drive)->ide_dma_end(drive);
+ dma_error = hwif->dma_ops->dma_end(drive);
Erm, I don't see 'hwif' declared in that function -- this won't compile.
Though wait, some patch adds it... OK.
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -411,7 +411,7 @@ static ide_startstop_t idefloppy_pc_intr
debug_log("Reached %s interrupt handler\n", __func__);
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- dma_error = hwif->ide_dma_end(drive);
+ dma_error = drive->hwif->dma_ops->dma_end(drive);
Here we, contrarily, already have 'hwif', so no need for extra indirection...
Index: b/drivers/ide/mips/au1xxx-ide.c
===================================================================
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -371,21 +371,31 @@ static void auide_init_dbdma_dev(dbdev_t
dev->dev_devwidth = devwidth;
dev->dev_flags = flags;
}
-
-#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
static void auide_dma_timeout(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
- if (hwif->ide_dma_test_irq(drive))
+ if (auide_dma_test_irq(drive))
return;
- hwif->ide_dma_end(drive);
+ auide_dma_end(drive);
}
Probably worth noting under "while at it"?
+static struct ide_dma_ops auide_dma_ops = {
+ .dma_host_set = auide_dma_host_set,
+ .dma_setup = auide_dma_setup,
+ .dma_exec_cmd = auide_dma_exec_cmd,
+ .dma_start = auide_dma_start,
+ .dma_end = auide_dma_end,
+ .dma_test_irq = auide_dma_test_irq,
+ .dma_lost_irq = auide_dma_lost_irq,
+ .dma_timeout = auide_dma_timeout,
+};
+
static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
_auide_hwif *auide = (_auide_hwif *)hwif->hwif_data;
@@ -516,6 +526,9 @@ static const struct ide_port_ops au1xxx_
static const struct ide_port_info au1xxx_port_info = {
.init_dma = auide_ddma_init,
.port_ops = &au1xxx_port_ops,
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ .dma_ops = &au1xxx_dma_ops,
You need to decide between au1xxx_ and auide_ prefixes, or the file won't
compile... ;-)
Index: b/drivers/ide/pci/cmd64x.c
===================================================================
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -385,62 +385,33 @@ static u8 __devinit cmd64x_cable_detect(
[...]
+static struct ide_dma_ops cmd643_dma_ops = {
Perhaps cmd64x_ prefix would match better here...
+ .dma_end = cmd64x_ide_dma_end,
+ .dma_test_irq = cmd64x_ide_dma_test_irq,
+};
+
+static struct ide_dma_ops cmd646_rev1_dma_ops = {
+ .dma_end = cmd646_1_ide_dma_end,
+};
+
+static struct ide_dma_ops cmd64x_dma_ops = {
+ .dma_end = cmd648_ide_dma_end,
+ .dma_test_irq = cmd648_ide_dma_test_irq,
+};
... and cmd648_ prefix here.
And why not drop the remaning ide_ "infixes" from functions while at it?
Index: b/drivers/ide/pci/hpt366.c
===================================================================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
Alas, this part looks incorrect...
@@ -1312,19 +1312,6 @@ static void __devinit init_hwif_hpt366(i
if (new_mcr != old_mcr)
pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
-
- if (hwif->dma_base == 0)
- return;
-
- if (chip_type >= HPT374) {
- hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
- hwif->ide_dma_end = &hpt374_ide_dma_end;
- } else if (chip_type >= HPT370) {
- hwif->dma_start = &hpt370_ide_dma_start;
- hwif->ide_dma_end = &hpt370_ide_dma_end;
- hwif->dma_timeout = &hpt370_dma_timeout;
- } else
- hwif->dma_lost_irq = &hpt366_dma_lost_irq;
}
static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
[...]
@@ -1428,6 +1415,21 @@ static const struct ide_port_ops hpt3xx_
.cable_detect = hpt3xx_cable_detect,
};
+static struct ide_dma_ops hpt3xxx_dma_ops = {
HPT3xxx is a RAID chip I heard. :-) Keep the prefix hpt37x_ please
+ .dma_end = hpt374_ide_dma_end,
+ .dma_test_irq = hpt374_ide_dma_test_irq,
+};
+
+static struct ide_dma_ops hpt370x_dma_ops = {
... and this one just hpt370_.
+ .dma_start = hpt370_ide_dma_start,
+ .dma_end = hpt370_ide_dma_end,
+ .dma_timeout = hpt370_dma_timeout,
+};
+
+static struct ide_dma_ops hpt36x_dma_ops = {
+ .dma_lost_irq = hpt366_dma_lost_irq,
+};
+
static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT36x",
[...]
@@ -1452,6 +1455,7 @@ static const struct ide_port_info hpt366
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.port_ops = &hpt3xx_port_ops,
+ .dma_ops = &hpt3xxx_dma_ops,
For HPT372A/N it should be hpt37x_. Correct.
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -1472,6 +1476,7 @@ static const struct ide_port_info hpt366
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.port_ops = &hpt3xx_port_ops,
+ .dma_ops = &hpt370x_dma_ops,
For HPT302/N it should be hpt37x_. Incorrect.
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -1483,6 +1488,7 @@ static const struct ide_port_info hpt366
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = ATA_UDMA5,
.port_ops = &hpt3xx_port_ops,
+ .dma_ops = &hpt370x_dma_ops,
For HPT371/N it should be hpt37x_. Incorrect.
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -1493,6 +1499,7 @@ static const struct ide_port_info hpt366
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.port_ops = &hpt3xx_port_ops,
+ .dma_ops = &hpt3xxx_dma_ops,
For HPT34 it should be hpt37x_. Correct.
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
Now where is the code which selects the correct dma_ops for the
HPT36x/370/372/372N chip with device ID 4 I'm asking you? :-)
Index: b/drivers/ide/pci/it821x.c
===================================================================
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -511,6 +511,11 @@ static void __devinit it821x_quirkproc(i
}
+static struct ide_dma_ops it821x_smart_dma_ops = {
I've got an impression that the mode is contrarywise -- non-SMART...
+ .dma_start = it821x_dma_start,
+ .dma_end = it821x_dma_end,
+};
+
/**
* init_hwif_it821x - set up hwif structs
* @hwif: interface to set up
@@ -562,8 +567,7 @@ static void __devinit init_hwif_it821x(i
if (idev->smart == 0) {
/* MWDMA/PIO clock switching for pass through mode */
- hwif->dma_start = &it821x_dma_start;
- hwif->ide_dma_end = &it821x_dma_end;
+ hwif->dma_ops = &it821x_smart_dma_ops;
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
See for yourself...
Index: b/drivers/ide/pci/ns87415.c
===================================================================
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -252,14 +252,17 @@ static void __devinit init_hwif_ns87415
return;
outb(0x60, hwif->dma_status);
- hwif->dma_setup = &ns87415_ide_dma_setup;
- hwif->ide_dma_end = &ns87415_ide_dma_end;
}
static const struct ide_port_ops ns87415_port_ops = {
.selectproc = ns87415_selectproc,
};
+static struct ide_dma_ops ns87415_dma_ops = {
+ .dma_setup = ns87415_ide_dma_setup,
+ .dma_end = ns87415_ide_dma_end,
+};
+
Time to drop ide_ "infixes" here too?
Index: b/drivers/ide/pci/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -263,23 +263,6 @@ static void pdc202xx_dma_timeout(ide_dri
ide_dma_timeout(drive);
}
-static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (hwif->dma_base == 0)
- return;
-
- hwif->dma_lost_irq = &pdc202xx_dma_lost_irq;
- hwif->dma_timeout = &pdc202xx_dma_timeout;
-
- if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
- hwif->dma_start = &pdc202xx_old_ide_dma_start;
- hwif->ide_dma_end = &pdc202xx_old_ide_dma_end;
- }
- hwif->ide_dma_test_irq = &pdc202xx_old_ide_dma_test_irq;
-}
-
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
const char *name)
{
@@ -346,12 +329,26 @@ static const struct ide_port_ops pdc2026
.cable_detect = pdc2026x_cable_detect,
};
+static struct ide_dma_ops pdc20246_dma_ops = {
+ .dma_test_irq = pdc202xx_old_ide_dma_test_irq,
Infixes galore! I'd killed both old_ and ide_ (but not Old IDE :-).
Much shorter and uniform name.
+ .dma_lost_irq = pdc202xx_dma_lost_irq,
+ .dma_timeout = pdc202xx_dma_timeout,
+};
+
+static struct ide_dma_ops pdc2026x_dma_ops = {
+ .dma_start = pdc202xx_old_ide_dma_start,
+ .dma_end = pdc202xx_old_ide_dma_end,
+ .dma_test_irq = pdc202xx_old_ide_dma_test_irq,
Drop 'em both! :-)
Index: b/drivers/ide/pci/sc1200.c
===================================================================
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -214,7 +214,7 @@ static void sc1200_set_pio_mode(ide_driv
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
ide_dma_off_quietly(drive);
if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma)
- hwif->dma_host_set(drive, 1);
+ hwif->dma_ops->dma_host_set(drive, 1);
return;
}
@@ -286,28 +286,20 @@ static int sc1200_resume (struct pci_dev
}
#endif
-/*
- * This gets invoked by the IDE driver once for each channel,
- * and performs channel-specific pre-initialization before drive probing.
- */
-static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
-{
- if (hwif->dma_base == 0)
- return;
-
- hwif->ide_dma_end = &sc1200_ide_dma_end;
-}
-
static const struct ide_port_ops sc1200_port_ops = {
.set_pio_mode = sc1200_set_pio_mode,
.set_dma_mode = sc1200_set_dma_mode,
.udma_filter = sc1200_udma_filter,
};
+static struct ide_dma_ops sc1200_dma_ops = {
+ .dma_end = sc1200_ide_dma_end,
Again, dropping "infix" is possible...
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -659,10 +659,6 @@ static void __devinit init_hwif_scc(ide_
/* PTERADD */
out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
- hwif->dma_setup = scc_dma_setup;
- hwif->ide_dma_end = scc_ide_dma_end;
- hwif->ide_dma_test_irq = scc_dma_test_irq;
-
if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
else
@@ -676,12 +672,19 @@ static const struct ide_port_ops scc_por
.cable_detect = scc_cable_detect,
};
+static struct ide_dma_ops scc_dma_ops = {
+ .dma_setup = scc_dma_setup,
+ .dma_end = scc_ide_dma_end,
And here too.
Index: b/drivers/ide/pci/sgiioc4.c
===================================================================
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
[...]
@@ -575,10 +560,21 @@ static const struct ide_port_ops sgiioc4
.maskproc = sgiioc4_maskproc,
};
+static struct ide_dma_ops sgiioc4_dma_ops = {
+ .dma_host_set = sgiioc4_dma_host_set,
+ .dma_setup = sgiioc4_ide_dma_setup,
+ .dma_start = sgiioc4_ide_dma_start,
+ .dma_end = sgiioc4_ide_dma_end,
+ .dma_test_irq = sgiioc4_ide_dma_test_irq,
+ .dma_lost_irq = sgiioc4_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
+};
+
Wow, a lot of survived infixes! :-)
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -369,6 +369,14 @@ static int siimage_mmio_ide_dma_test_irq
return 0;
}
+static int siimage_ide_dma_test_irq(ide_drive_t *drive)
+{
+ if (drive->hwif->mmio)
+ return siimage_mmio_ide_dma_test_irq(drive);
+ else
+ return siimage_io_ide_dma_test_irq(drive);
+}
+
I suggest removing infixes from the above functions instead of adding
another one...
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
[...]
@@ -459,15 +471,7 @@ typedef struct hwif_s {
void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
- void (*dma_host_set)(ide_drive_t *, int);
- int (*dma_setup)(ide_drive_t *);
- void (*dma_exec_cmd)(ide_drive_t *, u8);
- void (*dma_start)(ide_drive_t *);
- int (*ide_dma_end)(ide_drive_t *drive);
- int (*ide_dma_test_irq)(ide_drive_t *drive);
void (*ide_dma_clear_irq)(ide_drive_t *drive);
Now what about this lonely method? It belongs to dma_ops I think...
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
