[PATCH 11/17] ide-tape: remove pipeline-specific code from idetape_setup

[Borislav Petkov <petkovbb@xxxxxxxxxxxxxx>]

Signed-off-by: Borislav Petkov <petkovbb@xxxxxxxxx>
---
 drivers/ide/ide-tape.c |   40 ++++------------------------------------
 1 files changed, 4 insertions(+), 36 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index c612c8c..0056a26 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2690,11 +2690,10 @@ static inline void idetape_add_settings(ide_drive_t *drive) { ; }
  */
 static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 {
-	unsigned long t1, tmid, tn, t;
+	unsigned long t;
 	int speed;
 	int stage_size;
 	u8 gcw[2];
-	struct sysinfo si;
 	u16 *ctl = (u16 *)&tape->caps[12];
 
 	spin_lock_init(&tape->lock);
@@ -2719,10 +2718,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	if (((gcw[0] & 0x60) >> 5) == 1)
 		set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags);
 
-	tape->min_pipeline = 10;
-	tape->max_pipeline = 10;
-	tape->max_stages   = 10;
-
 	idetape_get_inquiry_results(drive);
 	idetape_get_mode_sense_results(drive);
 	ide_tape_get_bsize_from_bdesc(drive);
@@ -2740,36 +2735,10 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 		tape->excess_bh_size = PAGE_SIZE - stage_size % PAGE_SIZE;
 	}
 
-	/* Select the "best" DSC read/write polling freq and pipeline size. */
+	/* select the "best" DSC read/write polling freq */
 	speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
 
-	tape->max_stages = speed * 1000 * 10 / tape->stage_size;
-
-	/* Limit memory use for pipeline to 10% of physical memory */
-	si_meminfo(&si);
-	if (tape->max_stages * tape->stage_size >
-			si.totalram * si.mem_unit / 10)
-		tape->max_stages =
-			si.totalram * si.mem_unit / (10 * tape->stage_size);
-
-	tape->max_stages   = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES);
-	tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES);
-	tape->max_pipeline =
-		min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
-	if (tape->max_stages == 0) {
-		tape->max_stages   = 1;
-		tape->min_pipeline = 1;
-		tape->max_pipeline = 1;
-	}
-
-	t1 = (tape->stage_size * HZ) / (speed * 1000);
-	tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125);
-	tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000);
-
-	if (tape->max_stages)
-		t = tn;
-	else
-		t = t1;
+	t = (tape->stage_size * HZ) / (speed * 1000);
 
 	/*
 	 * Ensure that the number we got makes sense; limit it within
@@ -2779,11 +2748,10 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 				min_t(unsigned long, t, IDETAPE_DSC_RW_MAX),
 				IDETAPE_DSC_RW_MIN);
 	printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
-		"%dkB pipeline, %lums tDSC%s\n",
+		"%lums tDSC%s\n",
 		drive->name, tape->name, *(u16 *)&tape->caps[14],
 		(*(u16 *)&tape->caps[16] * 512) / tape->stage_size,
 		tape->stage_size / 1024,
-		tape->max_stages * tape->stage_size / 1024,
 		tape->best_dsc_rw_freq * 1000 / HZ,
 		drive->using_dma ? ", DMA":"");
 
-- 
1.5.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html