Volker Armin Hemmann wrote: > > [ 37.123980] ahci 0000:00:0a.0: version 3.0 > [ 37.124155] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 > [ 37.124199] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 > (level, low) -> IRQ 23 > [ 37.124533] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP > [ 38.124731] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf > impl IDE mode > [ 38.124780] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio > [ 38.124819] PCI: Setting latency timer of device 0000:00:0a.0 to 64 > [ 38.125020] scsi0 : ahci > [ 38.125116] scsi1 : ahci > [ 38.125182] scsi2 : ahci > [ 38.125248] scsi3 : ahci > [ 38.125337] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 > irq 315 > [ 38.125384] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 > irq 315 > [ 38.125432] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 > irq 315 > [ 38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 > irq 315 > [ 38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 > [ 38.597775] ata1.00: 312581808 sectors, multi 16: LBA48 > [ 38.598405] ata1.00: configured for UDMA/133 > [ 39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 > [ 39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 39.086268] ata2.00: configured for UDMA/133 So, just to confirm. With the updated patch, you don't see any problem, right? -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
