Tejun Heo wrote:
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@xxxxxxxxx> Cc: Mark Lord <mlord@xxxxxxxxx> --- I don't have a bridge which sets DMADIR but so only checked atapi_dmadir parameter. Thanks. drivers/ata/libata-core.c | 11 +++++++++-- drivers/ata/libata-scsi.c | 3 ++- include/linux/ata.h | 5 +++++ include/linux/libata.h | 1 + 4 files changed, 17 insertions(+), 3 deletions(-)
applied - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html