Re: JMicron - hard resetting link

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Gabor FUNK wrote:
> To sum it up:
> - 1st the 4 disks on the Jmicron controller failed with 1 [chieftek] PSU
> - then it failed with 2 PSU too, but this time the chieftek was only
>   connected to the different 4 disks - on the nvidia controller. MB
>   and other disks were on the other, non-chieftek [650W] PSU.
> - Then I started the tests with only this second PSU, and it ran
>   for about 6 days under heavy testing and array rebuilding and
>   guess what: it failed again.

Eeekk..

> Full kernel log at:
> http://www.huweb.hu/maques/tmp/jmicron/kern0221.log
> 
> Since it is not a "switch on and see" problem, I'm not in too good
> position, so unless someone have a really great idea or observation,
> I seriously have to consider to replace the MB and probably add
> some extra sata controllers.

If you can still do some testing, what happens if you unplug power to
the failed drive and replug it while the system is still running?  Does
hotplug event get triggered and the drive gets recognized again?  If so,
does unplugging and replugging the SATA controller only (w/o powering
down the drive) achieve the same thing?

Thanks.

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux