From: Julia Lawall <julia@xxxxxxx> The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@xxxxxxx> --- diff -u -p a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c --- a/drivers/ide/arm/palm_bk3710.c 2008-02-13 20:42:50.000000000 +0100 +++ b/drivers/ide/arm/palm_bk3710.c 2008-02-15 22:25:33.000000000 +0100 @@ -96,11 +96,11 @@ static void palm_bk3710_setudmamode(void u16 val16; /* DMA Data Setup */ - t0 = (palm_bk3710_udmatimings[mode].cycletime + ide_palm_clk - 1) - / ide_palm_clk - 1; - tenv = (20 + ide_palm_clk - 1) / ide_palm_clk - 1; - trp = (palm_bk3710_udmatimings[mode].rptime + ide_palm_clk - 1) - / ide_palm_clk - 1; + t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime, + ide_palm_clk) - 1; + tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1; + trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime, + ide_palm_clk) - 1; /* udmatim Register */ val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); @@ -141,8 +141,8 @@ static void palm_bk3710_setdmamode(void cycletime = max_t(int, t->cycle, min_cycle); /* DMA Data Setup */ - t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; - td = (t->active + ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(cycletime, ide_palm_clk); + td = DIV_ROUND_UP(t->active, ide_palm_clk); tkw = t0 - td - 1; td -= 1; @@ -168,9 +168,9 @@ static void palm_bk3710_setpiomode(void struct ide_timing *t; /* PIO Data Setup */ - t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; - t2 = (ide_timing_find_mode(XFER_PIO_0 + mode)->active + - ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(cycletime, ide_palm_clk); + t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active, + ide_palm_clk); t2i = t0 - t2 - 1; t2 -= 1; @@ -192,8 +192,8 @@ static void palm_bk3710_setpiomode(void /* TASKFILE Setup */ t = ide_timing_find_mode(XFER_PIO_0 + mode); - t0 = (t->cyc8b + ide_palm_clk - 1) / ide_palm_clk; - t2 = (t->act8b + ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk); + t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk); t2i = t0 - t2 - 1; t2 -= 1; diff -u -p a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c --- a/drivers/ide/pci/cmd640.c 2008-02-08 08:58:12.000000000 +0100 +++ b/drivers/ide/pci/cmd640.c 2008-02-15 22:25:38.000000000 +0100 @@ -584,15 +584,15 @@ static void cmd640_set_mode (unsigned in active_time = ide_pio_timings[pio_mode].active_time; recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / bus_speed; - cycle_count = (cycle_time + clock_time - 1) / clock_time; + cycle_count = DIV_ROUND_UP(cycle_time, clock_time); - setup_count = (setup_time + clock_time - 1) / clock_time; + setup_count = DIV_ROUND_UP(setup_time, clock_time); - active_count = (active_time + clock_time - 1) / clock_time; + active_count = DIV_ROUND_UP(active_time, clock_time); if (active_count < 2) active_count = 2; /* minimum allowed by cmd640 */ - recovery_count = (recovery_time + clock_time - 1) / clock_time; + recovery_count = DIV_ROUND_UP(recovery_time, clock_time); recovery_count2 = cycle_count - (setup_count + active_count); if (recovery_count2 > recovery_count) recovery_count = recovery_count2; - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
