[PATCH 1/2] ide-tape: move all struct and other defs at the top

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bart,

thanks for the update earlier. I'll look into blk_{get,put}_request later and
try it on idefloppy. In the meantime, here are the patches as requested:

---
>From 0d91862fc802d6f5aa79947b2685de6c209236f2 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@xxxxxxxxx>
Date: Sat, 9 Feb 2008 19:48:13 +0100
Subject: [PATCH 1/2] ide-tape: move all struct and other defs at the top

Signed-off-by: Borislav Petkov <petkovbb@xxxxxxxxx>
---
 drivers/ide/ide-tape.c |  107 ++++++++++++++++++++++++-----------------------
 1 files changed, 55 insertions(+), 52 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b3269d7..1fff560 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -225,6 +225,61 @@ typedef struct idetape_packet_command_s {
 /* Data direction */
 #define	PC_WRITING			5
 
+/* Tape door status */
+#define DOOR_UNLOCKED			0
+#define DOOR_LOCKED			1
+#define DOOR_EXPLICITLY_LOCKED		2
+
+/*
+ *	Tape flag bits values.
+ */
+#define IDETAPE_IGNORE_DSC		0
+/* 0 When the tape position is unknown */
+#define IDETAPE_ADDRESS_VALID		1
+#define IDETAPE_BUSY			2	/* Device already opened */
+/* Error detected in a pipeline stage */
+#define IDETAPE_PIPELINE_ERROR		3
+/* Attempt to auto-detect the current user block size */
+#define IDETAPE_DETECT_BS		4
+#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
+#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
+#define IDETAPE_READ_ERROR		7
+#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
+/* 0 = no tape is loaded, so we don't rewind after ejecting */
+#define IDETAPE_MEDIUM_PRESENT		9
+
+/* Some defines for the SPACE command */
+#define IDETAPE_SPACE_OVER_FILEMARK	1
+#define IDETAPE_SPACE_TO_EOD		3
+
+/* Some defines for the LOAD UNLOAD command */
+#define IDETAPE_LU_LOAD_MASK		1
+#define IDETAPE_LU_RETENSION_MASK	2
+#define IDETAPE_LU_EOT_MASK		4
+
+/*
+ * Special requests for our block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
+ */
+
+enum {
+	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
+	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
+	REQ_IDETAPE_READ	= (1 << 2),
+	REQ_IDETAPE_WRITE	= (1 << 3),
+};
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+#define	IDETAPE_ERROR_GENERAL		101
+#define	IDETAPE_ERROR_FILEMARK		102
+#define	IDETAPE_ERROR_EOD		103
+
+/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
+#define IDETAPE_BLOCK_DESCRIPTOR	0
+#define	IDETAPE_CAPABILITIES_PAGE	0x2a
+
 /* A pipeline stage. */
 typedef struct idetape_stage_s {
 	struct request rq;			/* The corresponding request */
@@ -446,58 +501,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 	mutex_unlock(&idetape_ref_mutex);
 }
 
-/* Tape door status */
-#define DOOR_UNLOCKED			0
-#define DOOR_LOCKED			1
-#define DOOR_EXPLICITLY_LOCKED		2
-
-/*
- *	Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC		0
-#define IDETAPE_ADDRESS_VALID		1	/* 0 When the tape position is unknown */
-#define IDETAPE_BUSY			2	/* Device already opened */
-#define IDETAPE_PIPELINE_ERROR		3	/* Error detected in a pipeline stage */
-#define IDETAPE_DETECT_BS		4	/* Attempt to auto-detect the current user block size */
-#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
-#define IDETAPE_READ_ERROR		7
-#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT		9
-
-/* Some defines for the SPACE command */
-#define IDETAPE_SPACE_OVER_FILEMARK	1
-#define IDETAPE_SPACE_TO_EOD		3
-
-/* Some defines for the LOAD UNLOAD command */
-#define IDETAPE_LU_LOAD_MASK		1
-#define IDETAPE_LU_RETENSION_MASK	2
-#define IDETAPE_LU_EOT_MASK		4
-
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
-	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
-	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
-	REQ_IDETAPE_READ	= (1 << 2),
-	REQ_IDETAPE_WRITE	= (1 << 3),
-};
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define	IDETAPE_ERROR_GENERAL		101
-#define	IDETAPE_ERROR_FILEMARK		102
-#define	IDETAPE_ERROR_EOD		103
-
-/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
-#define IDETAPE_BLOCK_DESCRIPTOR	0
-#define	IDETAPE_CAPABILITIES_PAGE	0x2a
-
 /*
  * The variables below are used for the character device interface. Additional
  * state variables are defined in our ide_drive_t structure.
-- 
1.5.3.7



-- 
Regards/Gruß,
    Boris.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux