IDE updates continued: * make remaining built-in only IDE host drivers modular and cleanup ide.c #ifdef hell (me) * "resurrected" fixes for HDIO_DRIVE_TASKFILE ioctl (Tejun Heo) * unify handling of REQ_TYPE_ATA_CMD and REQ_TYPE_ATA_TASKFILE requests (me, heavily based on the earlier patches from Tejun Heo) * host driver specific fixes: sl82c105, cs5520, cy82c693, atiixp and others * the usual cleanups/fixups all over the place All patches included in this update have been in IDE tree since at least 12th December, got testing in -mm and (almost all) have been reviewed by Sergei (IOW it is just another "boring" IDE update ;). Linus, please pull from: master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/ to receive the following updates: Documentation/ide.txt | 13 +-- drivers/ide/Kconfig | 50 +++++----- drivers/ide/Makefile | 58 +++++++----- drivers/ide/arm/Makefile | 4 + drivers/ide/arm/bast-ide.c | 2 +- drivers/ide/arm/icside.c | 23 +---- drivers/ide/arm/ide_arm.c | 17 +++- drivers/ide/arm/rapide.c | 33 +++--- drivers/ide/cris/Makefile | 2 +- drivers/ide/cris/ide-cris.c | 29 +++--- drivers/ide/h8300/Makefile | 2 + drivers/ide/h8300/ide-h8300.c | 27 ++++-- drivers/ide/ide-acpi.c | 2 +- drivers/ide/ide-disk.c | 57 +++++------ drivers/ide/ide-dma.c | 98 +++++++----------- drivers/ide/ide-generic.c | 8 ++- drivers/ide/ide-io.c | 116 +++------------------- drivers/ide/ide-iops.c | 31 +++--- drivers/ide/ide-lib.c | 25 ++---- drivers/ide/ide-pnp.c | 24 +++-- drivers/ide/ide-probe.c | 175 +++++++++++++++------------------ drivers/ide/ide-proc.c | 12 ++- drivers/ide/ide-scan-pci.c | 121 +++++++++++++++++++++++ drivers/ide/ide-tape.c | 5 + drivers/ide/ide-taskfile.c | 155 +++++++++++++---------------- drivers/ide/ide.c | 197 +++++++------------------------------ drivers/ide/legacy/Makefile | 19 +++- drivers/ide/legacy/ali14xx.c | 5 +- drivers/ide/legacy/buddha.c | 44 +++++---- drivers/ide/legacy/dtc2278.c | 5 +- drivers/ide/legacy/falconide.c | 22 +++- drivers/ide/legacy/gayle.c | 43 +++++--- drivers/ide/legacy/ht6560b.c | 5 +- drivers/ide/legacy/ide-cs.c | 2 +- drivers/ide/legacy/ide_platform.c | 55 +++++----- drivers/ide/legacy/macide.c | 52 +++++----- drivers/ide/legacy/q40ide.c | 24 ++++- drivers/ide/legacy/qd65xx.c | 5 +- drivers/ide/legacy/umc8672.c | 5 +- drivers/ide/mips/au1xxx-ide.c | 36 ++----- drivers/ide/mips/swarm.c | 1 + drivers/ide/pci/Makefile | 4 + drivers/ide/pci/atiixp.c | 71 ++++---------- drivers/ide/pci/cmd640.c | 16 +++- drivers/ide/pci/cmd64x.c | 114 +--------------------- drivers/ide/pci/cs5520.c | 19 ++--- drivers/ide/pci/cy82c693.c | 64 ++---------- drivers/ide/pci/delkin_cb.c | 2 +- drivers/ide/pci/hpt366.c | 11 ++- drivers/ide/pci/it821x.c | 37 +++----- drivers/ide/pci/pdc202xx_new.c | 11 ++- drivers/ide/pci/pdc202xx_old.c | 11 ++- drivers/ide/pci/sc1200.c | 6 +- drivers/ide/pci/serverworks.c | 25 +---- drivers/ide/pci/sgiioc4.c | 49 +++------- drivers/ide/pci/siimage.c | 15 ++-- drivers/ide/pci/sl82c105.c | 89 ++++------------- drivers/ide/pci/trm290.c | 9 +-- drivers/ide/ppc/Makefile | 3 + drivers/ide/ppc/mpc8xx.c | 18 ++++ drivers/ide/ppc/pmac.c | 46 +++++---- drivers/ide/setup-pci.c | 151 +++++------------------------ drivers/macintosh/mediabay.c | 3 +- include/linux/blkdev.h | 1 - include/linux/ide.h | 61 +++++++----- 65 files changed, 999 insertions(+), 1446 deletions(-) create mode 100644 drivers/ide/h8300/Makefile create mode 100644 drivers/ide/ide-scan-pci.c create mode 100644 drivers/ide/ppc/Makefile Bartlomiej Zolnierkiewicz (60): sl82c105: program DMA/PIO timings in ->dma_start/->ide_dma_end sl82c105: remove no longer needed ->selectproc method serverworks: cleanup ->set_dma_mode method ide-disk: add idedisk_set_doorlock() helper ide: (hopefully) fix VDMA for CS5520 cy82c693: correct DMA modes clipping cy82c693: add ->set_dma_mode method sgiioc4: add ide_toggle_bounce() calls icside: add ide_toggle_bounce() calls au1xxx-ide: add ide_toggle_bounce() calls ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t ide-cris: fix DMA methods atiixp: remove ->dma_host_on and ->dma_host_off methods ide: move drive->using_dma check to callers of ->dma_host_on method ide: merge ->dma_host_{on,off} methods into ->dma_host_set method ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined) ide: merge ->fixup and ->quirkproc methods ide: don't try to unregister interfaces if 'initializing' in ide_register_hw() ide: kill probe_hwif_init() ide: fix probing for hosts with serialized or IRQ sharing interfaces rapide: set hwif->chipset swarm: set hwif->chipset ide: add hwif->chipset fixup to ide_device_add() ide: remove ideprobe_init() sgiioc4: always init hwif->io_ports ide: add ide_init_port_hw() helper ide: drop 'initializing' argument from ide_register_hw() ide: move ide_arm_init() call from init_ide_data() to ide_init() cmd640: fix dependency on IDE_GENERIC ide: fix host drivers depending on ide_generic to probe for interfaces (take 2) ide: make remaining built-in only IDE host drivers modular (take 2) au1xxx-ide: au_ide_probe() fixes au1xxx-ide: use ide_init_port_hw() ide: always use ide_std_init_ports() in setup-pci.c ide: use ide_init_port_hw() in setup-pci.c rapide: remove write-only hwif->hwif_data ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabled ide: add ide_set_irq() inline helper ide: print banner message once per controller in m68k host drivers ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.c ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate it ide: add ide_busy_sleep() helper ide: remove broken disk byte-swapping support cmd64x: remove /proc/ide/cmd64x ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd() ide: fix final status check in task_in_intr() ide-tape: fix handling of non-special requests in ->end_request method ide: set IDE_TFLAG_IN_* flags before queuing/executing command ide: remove needless ->cursg clearing from task_end_request() ide: use rq->nr_sectors in task_end_request() ide: kill DATA_READY define ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2) ide: initialize rq->cmd_type in ide_init_drive_cmd() callers ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2) ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr() ide: fix final status check in drive_cmd_intr() ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests ide: remove REQ_TYPE_ATA_CMD Olof Johansson (1): ide: Fix build break caused by "ide: remove ideprobe_init()" Tejun Heo (2): ide: fix ->io_32bit race in ide_taskfile_ioctl() ide: task_end_request() fix diff --git a/Documentation/ide.txt b/Documentation/ide.txt index 1d50f23..94e2e3b 100644 --- a/Documentation/ide.txt +++ b/Documentation/ide.txt @@ -30,7 +30,7 @@ *** *** The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT* *** automatically detected by Linux. For safe, reliable operation with such -*** interfaces, one *MUST* use the "ide0=cmd640_vlb" kernel option. +*** interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option. *** *** Use of the "serialize" option is no longer necessary. @@ -244,10 +244,6 @@ Summary of ide driver parameters for kernel command line "hdx=nodma" : disallow DMA - "hdx=swapdata" : when the drive is a disk, byte swap all data - - "hdx=bswap" : same as above.......... - "hdx=scsi" : the return of the ide-scsi flag, this is useful for allowing ide-floppy, ide-tape, and ide-cdrom|writers to use ide-scsi emulation on a device specific option. @@ -292,9 +288,6 @@ The following are valid ONLY on ide0, which usually corresponds to the first ATA interface found on the particular host, and the defaults for the base,ctl ports must not be altered. - "ide0=cmd640_vlb" : *REQUIRED* for VLB cards with the CMD640 chip - (not for PCI -- automatically detected) - "ide=doubler" : probe/support IDE doublers on Amiga There may be more options than shown -- use the source, Luke! @@ -310,6 +303,10 @@ i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: * "probe" module parameter when ali14xx driver is compiled as module ("modprobe ali14xx probe") +Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" +kernel paremeter to enable probing for VLB version of the chipset (PCI ones +are detected automatically). + ================================================================================ IDE ATAPI streaming tape driver diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ee01e27..64df55e 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -325,7 +325,7 @@ config BLK_DEV_PLATFORM If unsure, say N. config BLK_DEV_CMD640 - bool "CMD640 chipset bugfix/support" + tristate "CMD640 chipset bugfix/support" depends on X86 ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and @@ -359,9 +359,8 @@ config BLK_DEV_CMD640_ENHANCED Otherwise say N. config BLK_DEV_IDEPNP - bool "PNP EIDE support" + tristate "PNP EIDE support" depends on PNP - select IDE_GENERIC help If you have a PnP (Plug and Play) compatible EIDE card and would like the kernel to automatically detect and activate @@ -375,7 +374,19 @@ config BLK_DEV_IDEPCI bool config IDEPCI_PCIBUS_ORDER - def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI + bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)" + depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI + default y + help + Probe IDE PCI devices in the order in which they appear on the + PCI bus (i.e. 00:1f.1 PCI device before 02:01.0 PCI device) + instead of the order in which IDE PCI host drivers are loaded. + + Please note that this method of assuring stable naming of + IDE devices is unreliable and use other means for achieving + it (i.e. udev). + + If in doubt, say N. # TODO: split it on per host driver config options (or module parameters) config BLK_DEV_OFFBOARD @@ -789,7 +800,7 @@ config BLK_DEV_CELLEB endif config BLK_DEV_IDE_PMAC - bool "Builtin PowerMac IDE support" + tristate "Builtin PowerMac IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y help This driver provides support for the built-in IDE controller on @@ -843,8 +854,9 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ depends on BLK_DEV_IDE_AU1XXX config IDE_ARM - def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) - select IDE_GENERIC + tristate "ARM IDE support" + depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) + default y config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" @@ -876,10 +888,9 @@ config BLK_DEV_IDE_BAST Simtec BAST or the Thorcom VR1000 config ETRAX_IDE - bool "ETRAX IDE support" + tristate "ETRAX IDE support" depends on CRIS && BROKEN select BLK_DEV_IDEDMA - select IDE_GENERIC help Enables the ETRAX IDE driver. @@ -911,17 +922,15 @@ config ETRAX_IDE_G27_RESET endchoice config IDE_H8300 - bool "H8300 IDE support" + tristate "H8300 IDE support" depends on H8300 - select IDE_GENERIC default y help Enables the H8300 IDE driver. config BLK_DEV_GAYLE - bool "Amiga Gayle IDE interface support" + tristate "Amiga Gayle IDE interface support" depends on AMIGA - select IDE_GENERIC help This is the IDE driver for the Amiga Gayle IDE interface. It supports both the `A1200 style' and `A4000 style' of the Gayle IDE interface, @@ -951,9 +960,8 @@ config BLK_DEV_IDEDOUBLER runtime using the "ide=doubler" kernel boot parameter. config BLK_DEV_BUDDHA - bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" + tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" depends on ZORRO && EXPERIMENTAL - select IDE_GENERIC help This is the IDE driver for the IDE interfaces on the Buddha, Catweasel and X-Surf expansion boards. It supports up to two interfaces @@ -964,9 +972,8 @@ config BLK_DEV_BUDDHA to one of its IDE interfaces. config BLK_DEV_FALCON_IDE - bool "Falcon IDE interface support" + tristate "Falcon IDE interface support" depends on ATARI - select IDE_GENERIC help This is the IDE driver for the builtin IDE interface on the Atari Falcon. Say Y if you have a Falcon and want to use IDE devices (hard @@ -974,9 +981,8 @@ config BLK_DEV_FALCON_IDE interface. config BLK_DEV_MAC_IDE - bool "Macintosh Quadra/Powerbook IDE interface support" + tristate "Macintosh Quadra/Powerbook IDE interface support" depends on MAC - select IDE_GENERIC help This is the IDE driver for the builtin IDE interface on some m68k Macintosh models. It supports both the `Quadra style' (used in @@ -988,18 +994,16 @@ config BLK_DEV_MAC_IDE builtin IDE interface. config BLK_DEV_Q40IDE - bool "Q40/Q60 IDE interface support" + tristate "Q40/Q60 IDE interface support" depends on Q40 - select IDE_GENERIC help Enable the on-board IDE controller in the Q40/Q60. This should normally be on; disable it only if you are running a custom hard drive subsystem through an expansion card. config BLK_DEV_MPC8xx_IDE - bool "MPC8xx IDE support" + tristate "MPC8xx IDE support" depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE - select IDE_GENERIC help This option provides support for IDE on Motorola MPC8xx Systems. Please see 'Type of MPC8xx IDE interface' for details. diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index b181fc6..0d2da89 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -7,41 +7,37 @@ # Note : at this point, these files are compiled on all systems. # In the future, some of these should be built conditionally. # -# First come modules that register themselves with the core +# link order is important here EXTRA_CFLAGS += -Idrivers/ide -obj-$(CONFIG_BLK_DEV_IDE) += pci/ - ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o -ide-core-$(CONFIG_BLK_DEV_CMD640) += pci/cmd640.o - -# Core IDE code - must come before legacy +# core IDE code ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o -ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o -# built-in only drivers from arm/ -ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o +obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o -# built-in only drivers from legacy/ -ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o -ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o -ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o -ide-core-$(CONFIG_BLK_DEV_MAC_IDE) += legacy/macide.o -ide-core-$(CONFIG_BLK_DEV_Q40IDE) += legacy/q40ide.o +ifeq ($(CONFIG_IDE_ARM), y) + ide-arm-core-y += arm/ide_arm.o + obj-y += ide-arm-core.o +endif -# built-in only drivers from ppc/ -ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o -ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o +obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/ -# built-in only drivers from h8300/ -ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o +obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o -obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o +ifeq ($(CONFIG_BLK_DEV_CMD640), y) + cmd640-core-y += pci/cmd640.o + obj-y += cmd640-core.o +endif + +obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/ +obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o +obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o @@ -49,6 +45,20 @@ obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o -obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/ -obj-$(CONFIG_BLK_DEV_HD) += legacy/ -obj-$(CONFIG_ETRAX_IDE) += cris/ +ifeq ($(CONFIG_BLK_DEV_IDECS), y) + ide-cs-core-y += legacy/ide-cs.o + obj-y += ide-cs-core.o +endif + +ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) + ide-platform-core-y += legacy/ide_platform.o + obj-y += ide-platform-core.o +endif + +obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ + +# old hd driver must be last +ifeq ($(CONFIG_BLK_DEV_HD), y) + hd-core-y += legacy/hd.o + obj-y += hd-core.o +endif diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 6a78f07..5f63ad2 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -3,4 +3,8 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o +ifeq ($(CONFIG_IDE_ARM), m) + obj-m += ide_arm.o +endif + EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 48db616..45bf9c8 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -45,7 +45,7 @@ bastide_register(unsigned int base, unsigned int aux, int irq, hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); hw.irq = irq; - ide_register_hw(&hw, NULL, 0, hwif); + ide_register_hw(&hw, NULL, hwif); return 0; } diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 673402f..8a5c720 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -287,26 +287,10 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data); } -static void icside_dma_host_off(ide_drive_t *drive) +static void icside_dma_host_set(ide_drive_t *drive, int on) { } -static void icside_dma_off_quietly(ide_drive_t *drive) -{ - drive->using_dma = 0; -} - -static void icside_dma_host_on(ide_drive_t *drive) -{ -} - -static int icside_dma_on(ide_drive_t *drive) -{ - drive->using_dma = 1; - - return 0; -} - static int icside_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); @@ -422,10 +406,7 @@ static void icside_dma_init(ide_hwif_t *hwif) hwif->dmatable_dma = 0; hwif->set_dma_mode = icside_set_dma_mode; - hwif->dma_host_off = icside_dma_host_off; - hwif->dma_off_quietly = icside_dma_off_quietly; - hwif->dma_host_on = icside_dma_host_on; - hwif->ide_dma_on = icside_dma_on; + hwif->dma_host_set = icside_dma_host_set; hwif->dma_setup = icside_dma_setup; hwif->dma_exec_cmd = icside_dma_exec_cmd; hwif->dma_start = icside_dma_start; diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 8957cba..60f2497 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -24,12 +24,25 @@ # define IDE_ARM_IRQ IRQ_HARDDISK #endif -void __init ide_arm_init(void) +static int __init ide_arm_init(void) { + ide_hwif_t *hwif; hw_regs_t hw; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); hw.irq = IDE_ARM_IRQ; - ide_register_hw(&hw, NULL, 1, NULL); + + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif) { + ide_init_port_hw(hwif, &hw); + idx[0] = hwif->index; + + ide_device_add(idx); + } + + return 0; } + +module_init(ide_arm_init); diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index 0775a3a..e6b56d1 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -13,26 +13,18 @@ #include <asm/ecard.h> -static ide_hwif_t * -rapide_locate_hwif(void __iomem *base, void __iomem *ctrl, unsigned int sz, int irq) +static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base, + void __iomem *ctrl, unsigned int sz, int irq) { unsigned long port = (unsigned long)base; - ide_hwif_t *hwif = ide_find_port(port); int i; - if (hwif == NULL) - goto out; - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - hwif->io_ports[i] = port; + hw->io_ports[i] = port; port += sz; } - hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; - hwif->irq = irq; - hwif->mmio = 1; - default_hwif_mmiops(hwif); -out: - return hwif; + hw->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; + hw->irq = irq; } static int __devinit @@ -42,6 +34,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) void __iomem *base; int ret; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw; ret = ecard_request_resources(ec); if (ret) @@ -53,11 +46,17 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) goto release; } - hwif = rapide_locate_hwif(base, base + 0x818, 1 << 6, ec->irq); + hwif = ide_find_port((unsigned long)base); if (hwif) { - hwif->hwif_data = base; - hwif->gendev.parent = &ec->dev; - hwif->noprobe = 0; + memset(&hw, 0, sizeof(hw)); + rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); + hw.chipset = ide_generic; + hw.dev = &ec->dev; + + ide_init_port_hw(hwif, &hw); + + hwif->mmio = 1; + default_hwif_mmiops(hwif); idx[0] = hwif->index; diff --git a/drivers/ide/cris/Makefile b/drivers/ide/cris/Makefile index 6176e8d..20b9596 100644 --- a/drivers/ide/cris/Makefile +++ b/drivers/ide/cris/Makefile @@ -1,3 +1,3 @@ EXTRA_CFLAGS += -Idrivers/ide -obj-y += ide-cris.o +obj-$(CONFIG_IDE_ETRAX) += ide-cris.o diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 325e608..8c3294c 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -673,9 +673,8 @@ static void cris_ide_input_data (ide_drive_t *drive, void *, unsigned int); static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int); static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int); static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int); -static int cris_dma_on (ide_drive_t *drive); -static void cris_dma_off(ide_drive_t *drive) +static void cris_dma_host_set(ide_drive_t *drive, int on) { } @@ -755,13 +754,11 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed) cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); } -void __init -init_e100_ide (void) +static int __init init_e100_ide(void) { hw_regs_t hw; - int ide_offsets[IDE_NR_PORTS]; - int h; - int i; + int ide_offsets[IDE_NR_PORTS], h, i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; printk("ide: ETRAX FS built-in ATA DMA controller\n"); @@ -778,9 +775,11 @@ init_e100_ide (void) ide_offsets, 0, 0, cris_ide_ack_intr, ide_default_irq(0)); - ide_register_hw(&hw, NULL, 1, &hwif); + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif == NULL) continue; + ide_init_port_data(hwif, hwif->index); + ide_init_port_hw(hwif, &hw); hwif->mmio = 1; hwif->chipset = ide_etrax100; hwif->set_pio_mode = &cris_set_pio_mode; @@ -789,6 +788,7 @@ init_e100_ide (void) hwif->ata_output_data = &cris_ide_output_data; hwif->atapi_input_bytes = &cris_atapi_input_bytes; hwif->atapi_output_bytes = &cris_atapi_output_bytes; + hwif->dma_host_set = &cris_dma_host_set; hwif->ide_dma_end = &cris_dma_end; hwif->dma_setup = &cris_dma_setup; hwif->dma_exec_cmd = &cris_dma_exec_cmd; @@ -799,9 +799,6 @@ init_e100_ide (void) hwif->OUTBSYNC = &cris_ide_outbsync; hwif->INB = &cris_ide_inb; hwif->INW = &cris_ide_inw; - hwif->dma_host_off = &cris_dma_off; - hwif->dma_host_on = &cris_dma_on; - hwif->dma_off_quietly = &cris_dma_off; hwif->cbl = ATA_CBL_PATA40; hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; hwif->pio_mask = ATA_PIO4, @@ -809,6 +806,8 @@ init_e100_ide (void) hwif->drives[1].autotune = 1; hwif->ultra_mask = cris_ultra_mask; hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */ + + idx[h] = hwif->index; } /* Reset pulse */ @@ -821,14 +820,12 @@ init_e100_ide (void) cris_ide_set_speed(TYPE_PIO, ATA_PIO4_SETUP, ATA_PIO4_STROBE, ATA_PIO4_HOLD); cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD); cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); -} -static int cris_dma_on (ide_drive_t *drive) -{ + ide_device_add(idx); + return 0; } - static cris_dma_descr_type mydescr __attribute__ ((__aligned__(16))); /* @@ -1060,3 +1057,5 @@ static void cris_dma_start(ide_drive_t *drive) LED_DISK_READ(1); } } + +module_init(init_e100_ide); diff --git a/drivers/ide/h8300/Makefile b/drivers/ide/h8300/Makefile new file mode 100644 index 0000000..5eba16f --- /dev/null +++ b/drivers/ide/h8300/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_IDE_H8300) += ide-h8300.o diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 4a49b5c..4f6d019 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -84,11 +84,12 @@ static inline void hwif_setup(ide_hwif_t *hwif) hwif->INSL = NULL; } -void __init h8300_ide_init(void) +static int __init h8300_ide_init(void) { hw_regs_t hw; ide_hwif_t *hwif; - int idx; + int index; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300")) goto out_busy; @@ -100,16 +101,28 @@ void __init h8300_ide_init(void) hw_setup(&hw); /* register if */ - idx = ide_register_hw(&hw, NULL, 1, &hwif); - if (idx == -1) { + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif == NULL) { printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); - return; + return -ENOENT; } + index = hwif->index; + ide_init_port_data(hwif, index); + ide_init_port_hw(hwif, &hw); hwif_setup(hwif); - printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", idx); - return; + printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); + + idx[0] = index; + + ide_device_add(idx); + + return 0; out_busy: printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n"); + + return -EBUSY; } + +module_init(h8300_ide_init); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index e0bb0cf..e888fc3 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -386,7 +386,7 @@ static int taskfile_load_raw(ide_drive_t *drive, /* convert gtf to IDE Taskfile */ memcpy(&args.tf_array[7], >f->tfa, 7); - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; if (ide_noacpitfs) { DEBPRINT("_GTF execution disabled\n"); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index d8fdd86..717e114 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -201,7 +201,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, memset(&task, 0, sizeof(task)); task.tf_flags = IDE_TFLAG_NO_SELECT_MASK; /* FIXME? */ - task.tf_flags |= (IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE); + task.tf_flags |= (IDE_TFLAG_TF | IDE_TFLAG_DEVICE); if (drive->select.b.lba) { if (lba48) { @@ -219,13 +219,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->lbal = (u8) block; tf->lbam = (u8)(block >> 8); tf->lbah = (u8)(block >> 16); -#ifdef DEBUG - printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", - drive->name, tf->hob_nsect, tf->nsect, - tf->hob_lbah, tf->hob_lbam, tf->hob_lbal, - tf->lbah, tf->lbam, tf->lbal); -#endif - task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + + task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); } else { tf->nsect = nsectors & 0xff; tf->lbal = block; @@ -319,9 +314,9 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) else tf->command = WIN_READ_NATIVE_MAX; tf->device = ATA_LBA; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; if (lba48) - args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); /* submit command request */ ide_no_data_taskfile(drive, &args); @@ -358,9 +353,9 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) tf->command = WIN_SET_MAX; } tf->device |= ATA_LBA; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; if (lba48) - args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); /* submit command request */ ide_no_data_taskfile(drive, &args); /* if OK, compute maximum address value */ @@ -500,7 +495,7 @@ static int smart_enable(ide_drive_t *drive) tf->lbam = SMART_LCYL_PASS; tf->lbah = SMART_HCYL_PASS; tf->command = WIN_SMART; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; return ide_no_data_taskfile(drive, &args); } @@ -515,7 +510,7 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) tf->lbam = SMART_LCYL_PASS; tf->lbah = SMART_HCYL_PASS; tf->command = WIN_SMART; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; args.data_phase = TASKFILE_IN; (void) smart_enable(drive); return ide_raw_taskfile(drive, &args, buf, 1); @@ -625,8 +620,10 @@ static int set_multcount(ide_drive_t *drive, int arg) if (drive->special.b.set_multmode) return -EBUSY; + ide_init_drive_cmd (&rq); - rq.cmd_type = REQ_TYPE_ATA_CMD; + rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + drive->mult_req = arg; drive->special.b.set_multmode = 1; (void) ide_do_drive_cmd (drive, &rq, ide_wait); @@ -694,7 +691,7 @@ static int write_cache(ide_drive_t *drive, int arg) args.tf.feature = arg ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; args.tf.command = WIN_SETFEATURES; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; err = ide_no_data_taskfile(drive, &args); if (err == 0) drive->wcache = arg; @@ -714,7 +711,7 @@ static int do_idedisk_flushcache (ide_drive_t *drive) args.tf.command = WIN_FLUSH_CACHE_EXT; else args.tf.command = WIN_FLUSH_CACHE; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; return ide_no_data_taskfile(drive, &args); } @@ -729,7 +726,7 @@ static int set_acoustic (ide_drive_t *drive, int arg) args.tf.feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM; args.tf.nsect = arg; args.tf.command = WIN_SETFEATURES; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; ide_no_data_taskfile(drive, &args); drive->acoustic = arg; return 0; @@ -766,7 +763,6 @@ static void idedisk_add_settings(ide_drive_t *drive) ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1, &drive->addressing, set_lba_addressing); - ide_add_setting(drive, "bswap", SETTING_READ, TYPE_BYTE, 0, 1, 1, 1, &drive->bswap, NULL); ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, id->max_multsect, 1, 1, &drive->mult_count, set_multcount); ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr); ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL); @@ -975,6 +971,17 @@ static ide_driver_t idedisk_driver = { #endif }; +static int idedisk_set_doorlock(ide_drive_t *drive, int on) +{ + ide_task_t task; + + memset(&task, 0, sizeof(task)); + task.tf.command = on ? WIN_DOORLOCK : WIN_DOORUNLOCK; + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + + return ide_no_data_taskfile(drive, &task); +} + static int idedisk_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; @@ -989,17 +996,13 @@ static int idedisk_open(struct inode *inode, struct file *filp) idkp->openers++; if (drive->removable && idkp->openers == 1) { - ide_task_t args; - memset(&args, 0, sizeof(ide_task_t)); - args.tf.command = WIN_DOORLOCK; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; check_disk_change(inode->i_bdev); /* * Ignore the return code from door_lock, * since the open() has already succeeded, * and the door_lock is irrelevant at this point. */ - if (drive->doorlocking && ide_no_data_taskfile(drive, &args)) + if (drive->doorlocking && idedisk_set_doorlock(drive, 1)) drive->doorlocking = 0; } return 0; @@ -1015,11 +1018,7 @@ static int idedisk_release(struct inode *inode, struct file *filp) ide_cacheflush_p(drive); if (drive->removable && idkp->openers == 1) { - ide_task_t args; - memset(&args, 0, sizeof(ide_task_t)); - args.tf.command = WIN_DOORUNLOCK; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - if (drive->doorlocking && ide_no_data_taskfile(drive, &args)) + if (drive->doorlocking && idedisk_set_doorlock(drive, 0)) drive->doorlocking = 0; } diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 18c78ad..5bf3203 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -153,13 +153,7 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive) if (!dma_stat) { struct request *rq = HWGROUP(drive)->rq; - if (rq->rq_disk) { - ide_driver_t *drv; - - drv = *(ide_driver_t **)rq->rq_disk->private_data; - drv->end_request(drive, 1, rq->nr_sectors); - } else - ide_end_request(drive, 1, rq->nr_sectors); + task_end_request(drive, rq, stat); return ide_stopped; } printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n", @@ -408,23 +402,29 @@ static int dma_timer_expiry (ide_drive_t *drive) } /** - * ide_dma_host_off - Generic DMA kill + * ide_dma_host_set - Enable/disable DMA on a host * @drive: drive to control * - * Perform the generic IDE controller DMA off operation. This - * works for most IDE bus mastering controllers + * Enable/disable DMA on an IDE controller following generic + * bus-mastering IDE controller behaviour. */ -void ide_dma_host_off(ide_drive_t *drive) +void ide_dma_host_set(ide_drive_t *drive, int on) { ide_hwif_t *hwif = HWIF(drive); u8 unit = (drive->select.b.unit & 0x01); u8 dma_stat = hwif->INB(hwif->dma_status); - hwif->OUTB((dma_stat & ~(1<<(5+unit))), hwif->dma_status); + if (on) + dma_stat |= (1 << (5 + unit)); + else + dma_stat &= ~(1 << (5 + unit)); + + hwif->OUTB(dma_stat, hwif->dma_status); } -EXPORT_SYMBOL(ide_dma_host_off); +EXPORT_SYMBOL_GPL(ide_dma_host_set); +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_dma_off_quietly - Generic DMA kill @@ -438,11 +438,10 @@ void ide_dma_off_quietly(ide_drive_t *drive) drive->using_dma = 0; ide_toggle_bounce(drive, 0); - drive->hwif->dma_host_off(drive); + drive->hwif->dma_host_set(drive, 0); } EXPORT_SYMBOL(ide_dma_off_quietly); -#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_dma_off - disable DMA on a device @@ -455,52 +454,29 @@ EXPORT_SYMBOL(ide_dma_off_quietly); void ide_dma_off(ide_drive_t *drive) { printk(KERN_INFO "%s: DMA disabled\n", drive->name); - drive->hwif->dma_off_quietly(drive); + ide_dma_off_quietly(drive); } EXPORT_SYMBOL(ide_dma_off); -#ifdef CONFIG_BLK_DEV_IDEDMA_PCI -/** - * ide_dma_host_on - Enable DMA on a host - * @drive: drive to enable for DMA - * - * Enable DMA on an IDE controller following generic bus mastering - * IDE controller behaviour - */ - -void ide_dma_host_on(ide_drive_t *drive) -{ - if (drive->using_dma) { - ide_hwif_t *hwif = HWIF(drive); - u8 unit = (drive->select.b.unit & 0x01); - u8 dma_stat = hwif->INB(hwif->dma_status); - - hwif->OUTB((dma_stat|(1<<(5+unit))), hwif->dma_status); - } -} - -EXPORT_SYMBOL(ide_dma_host_on); - /** - * __ide_dma_on - Enable DMA on a device + * ide_dma_on - Enable DMA on a device * @drive: drive to enable DMA on * * Enable IDE DMA for a device on this IDE controller. */ - -int __ide_dma_on (ide_drive_t *drive) + +void ide_dma_on(ide_drive_t *drive) { drive->using_dma = 1; ide_toggle_bounce(drive, 1); - drive->hwif->dma_host_on(drive); - - return 0; + drive->hwif->dma_host_set(drive, 1); } -EXPORT_SYMBOL(__ide_dma_on); +EXPORT_SYMBOL(ide_dma_on); +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI /** * ide_dma_setup - begin a DMA phase * @drive: target device @@ -755,6 +731,7 @@ EXPORT_SYMBOL_GPL(ide_find_dma_mode); static int ide_tune_dma(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; u8 speed; if (noautodma || drive->nodma || (drive->id->capability & 1) == 0) @@ -767,15 +744,21 @@ static int ide_tune_dma(ide_drive_t *drive) if (ide_id_dma_bug(drive)) return 0; - if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) + if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); speed = ide_max_dma_mode(drive); - if (!speed) - return 0; + if (!speed) { + /* is this really correct/needed? */ + if ((hwif->host_flags & IDE_HFLAG_CY82C693) && + ide_dma_good_drive(drive)) + return 1; + else + return 0; + } - if (drive->hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) return 0; if (ide_set_dma_mode(drive, speed)) @@ -820,7 +803,6 @@ err_out: int ide_set_dma(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; int rc; /* @@ -829,13 +811,15 @@ int ide_set_dma(ide_drive_t *drive) * things, if not checked and cleared. * PARANOIA!!! */ - hwif->dma_off_quietly(drive); + ide_dma_off_quietly(drive); rc = ide_dma_check(drive); if (rc) return rc; - return hwif->ide_dma_on(drive); + ide_dma_on(drive); + + return 0; } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI @@ -972,14 +956,8 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports) if (!(hwif->dma_prdtable)) hwif->dma_prdtable = (hwif->dma_base + 4); - if (!hwif->dma_off_quietly) - hwif->dma_off_quietly = &ide_dma_off_quietly; - if (!hwif->dma_host_off) - hwif->dma_host_off = &ide_dma_host_off; - if (!hwif->ide_dma_on) - hwif->ide_dma_on = &__ide_dma_on; - if (!hwif->dma_host_on) - hwif->dma_host_on = &ide_dma_host_on; + if (!hwif->dma_host_set) + hwif->dma_host_set = &ide_dma_host_set; if (!hwif->dma_setup) hwif->dma_setup = &ide_dma_setup; if (!hwif->dma_exec_cmd) diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 0f72b98..bb30c29 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -14,10 +14,16 @@ static int __init ide_generic_init(void) { + u8 idx[MAX_HWIFS]; + int i; + if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) ide_get_lock(NULL, NULL); /* for atari only */ - (void)ideprobe_init(); + for (i = 0; i < MAX_HWIFS; i++) + idx[i] = ide_hwifs[i].present ? 0xff : i; + + ide_device_add_all(idx); if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) ide_release_lock(); /* for atari only */ diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 2711b5a..6f8f544 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -75,7 +75,7 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq, */ if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) { drive->state = 0; - HWGROUP(drive)->hwif->ide_dma_on(drive); + ide_dma_on(drive); } if (!end_that_request_chunk(rq, uptodate, nr_bytes)) { @@ -219,7 +219,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * * we could be smarter and check for current xfer_speed * in struct drive etc... */ - if (drive->hwif->ide_dma_on == NULL) + if (drive->hwif->dma_host_set == NULL) break; /* * TODO: respect ->using_dma setting @@ -231,7 +231,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * return ide_stopped; out_do_tf: - args->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; args->data_phase = TASKFILE_NO_DATA; return do_rw_taskfile(drive, args); } @@ -354,7 +354,6 @@ void ide_tf_read(ide_drive_t *drive, ide_task_t *task) void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) { - ide_hwif_t *hwif = HWIF(drive); unsigned long flags; struct request *rq; @@ -362,17 +361,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) rq = HWGROUP(drive)->rq; spin_unlock_irqrestore(&ide_lock, flags); - if (rq->cmd_type == REQ_TYPE_ATA_CMD) { - u8 *args = (u8 *) rq->buffer; - if (rq->errors == 0) - rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT); - - if (args) { - args[0] = stat; - args[1] = err; - args[2] = hwif->INB(IDE_NSECTOR_REG); - } - } else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { ide_task_t *args = (ide_task_t *) rq->special; if (rq->errors == 0) rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT); @@ -383,10 +372,6 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) tf->error = err; tf->status = stat; - args->tf_flags |= (IDE_TFLAG_IN_TF|IDE_TFLAG_IN_DEVICE); - if (args->tf_flags & IDE_TFLAG_LBA48) - args->tf_flags |= IDE_TFLAG_IN_HOB; - ide_tf_read(drive, args); } } else if (blk_pm_request(rq)) { @@ -626,42 +611,6 @@ ide_startstop_t ide_abort(ide_drive_t *drive, const char *msg) return __ide_abort(drive, rq); } -/** - * drive_cmd_intr - drive command completion interrupt - * @drive: drive the completion interrupt occurred on - * - * drive_cmd_intr() is invoked on completion of a special DRIVE_CMD. - * We do any necessary data reading and then wait for the drive to - * go non busy. At that point we may read the error data and complete - * the request - */ - -static ide_startstop_t drive_cmd_intr (ide_drive_t *drive) -{ - struct request *rq = HWGROUP(drive)->rq; - ide_hwif_t *hwif = HWIF(drive); - u8 *args = (u8 *) rq->buffer; - u8 stat = hwif->INB(IDE_STATUS_REG); - int retries = 10; - - local_irq_enable_in_hardirq(); - if (rq->cmd_type == REQ_TYPE_ATA_CMD && - (stat & DRQ_STAT) && args && args[3]) { - u8 io_32bit = drive->io_32bit; - drive->io_32bit = 0; - hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS); - drive->io_32bit = io_32bit; - while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) - udelay(100); - } - - if (!OK_STAT(stat, READY_STAT, BAD_STAT)) - return ide_error(drive, "drive_cmd", stat); - /* calls ide_end_drive_cmd */ - ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG)); - return ide_stopped; -} - static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; @@ -710,7 +659,7 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) return ide_stopped; } - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE | + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE | IDE_TFLAG_CUSTOM_HANDLER; do_rw_taskfile(drive, &args); @@ -787,7 +736,7 @@ static ide_startstop_t do_special (ide_drive_t *drive) if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) { if (keep_dma) - hwif->ide_dma_on(drive); + ide_dma_on(drive); } } @@ -847,16 +796,9 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, struct request *rq) { ide_hwif_t *hwif = HWIF(drive); - u8 *args = rq->buffer; - ide_task_t ltask; - struct ide_taskfile *tf = <ask.tf; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - ide_task_t *task = rq->special; - - if (task == NULL) - goto done; + ide_task_t *task = rq->special; + if (task) { hwif->data_phase = task->data_phase; switch (hwif->data_phase) { @@ -873,33 +815,6 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, return do_rw_taskfile(drive, task); } - if (args == NULL) - goto done; - - memset(<ask, 0, sizeof(ltask)); - if (rq->cmd_type == REQ_TYPE_ATA_CMD) { -#ifdef DEBUG - printk("%s: DRIVE_CMD\n", drive->name); -#endif - tf->feature = args[2]; - if (args[0] == WIN_SMART) { - tf->nsect = args[3]; - tf->lbal = args[1]; - tf->lbam = 0x4f; - tf->lbah = 0xc2; - ltask.tf_flags = IDE_TFLAG_OUT_TF; - } else { - tf->nsect = args[1]; - ltask.tf_flags = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT; - } - } - tf->command = args[0]; - ide_tf_load(drive, <ask); - ide_execute_command(drive, args[0], &drive_cmd_intr, WAIT_WORSTCASE, NULL); - return ide_started; - -done: /* * NULL is actually a valid way of waiting for * all current requests to be flushed from the queue. @@ -939,8 +854,7 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) if (rc) printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); SELECT_DRIVE(drive); - if (IDE_CONTROL_REG) - HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); + ide_set_irq(drive, 1); rc = ide_wait_not_busy(HWIF(drive), 100000); if (rc) printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); @@ -1004,8 +918,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (drive->current_speed == 0xff) ide_config_drive_speed(drive, drive->desired_speed); - if (rq->cmd_type == REQ_TYPE_ATA_CMD || - rq->cmd_type == REQ_TYPE_ATA_TASKFILE) + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { struct request_pm_state *pm = rq->data; @@ -1213,15 +1126,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) } again: hwif = HWIF(drive); - if (hwgroup->hwif->sharing_irq && - hwif != hwgroup->hwif && - hwif->io_ports[IDE_CONTROL_OFFSET]) { + if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif) { /* * set nIEN for previous hwif, drives in the * quirk_list may not like intr setups/cleanups */ if (drive->quirk_list != 1) - hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); + ide_set_irq(drive, 0); } hwgroup->hwif = hwif; hwgroup->drive = drive; @@ -1334,7 +1245,7 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) */ drive->retry_pio++; drive->state = DMA_PIO_RETRY; - hwif->dma_off_quietly(drive); + ide_dma_off_quietly(drive); /* * un-busy drive etc (hwgroup->busy is cleared on return) and @@ -1679,7 +1590,6 @@ irqreturn_t ide_intr (int irq, void *dev_id) void ide_init_drive_cmd (struct request *rq) { memset(rq, 0, sizeof(*rq)); - rq->cmd_type = REQ_TYPE_ATA_CMD; rq->ref_count = 1; } diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c97c071..e2a7e95 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -619,7 +619,7 @@ no_80w: int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) { if (args->tf.command == WIN_SETFEATURES && - args->tf.lbal > XFER_UDMA_2 && + args->tf.nsect > XFER_UDMA_2 && args->tf.feature == SETFEATURES_XFER) { if (eighty_ninty_three(drive) == 0) { printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " @@ -639,7 +639,7 @@ int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) int set_transfer (ide_drive_t *drive, ide_task_t *args) { if (args->tf.command == WIN_SETFEATURES && - args->tf.lbal >= XFER_SW_DMA_0 && + args->tf.nsect >= XFER_SW_DMA_0 && args->tf.feature == SETFEATURES_XFER && (drive->id->dma_ultra || drive->id->dma_mword || @@ -688,8 +688,7 @@ int ide_driveid_update(ide_drive_t *drive) */ SELECT_MASK(drive, 1); - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl,IDE_CONTROL_REG); + ide_set_irq(drive, 1); msleep(50); hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG); timeout = jiffies + WAIT_WORSTCASE; @@ -742,8 +741,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) // msleep(50); #ifdef CONFIG_BLK_DEV_IDEDMA - if (hwif->ide_dma_on) /* check if host supports DMA */ - hwif->dma_host_off(drive); + if (hwif->dma_host_set) /* check if host supports DMA */ + hwif->dma_host_set(drive, 0); #endif /* Skip setting PIO flow-control modes on pre-EIDE drives */ @@ -772,13 +771,12 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) SELECT_DRIVE(drive); SELECT_MASK(drive, 0); udelay(1); - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); + ide_set_irq(drive, 0); hwif->OUTB(speed, IDE_NSECTOR_REG); hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG); hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG); - if ((IDE_CONTROL_REG) && (drive->quirk_list == 2)) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); + if (drive->quirk_list == 2) + ide_set_irq(drive, 1); error = __ide_wait_stat(drive, drive->ready_stat, BUSY_STAT|DRQ_STAT|ERR_STAT, @@ -799,10 +797,11 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) skip: #ifdef CONFIG_BLK_DEV_IDEDMA - if (speed >= XFER_SW_DMA_0) - hwif->dma_host_on(drive); - else if (hwif->ide_dma_on) /* check if host supports DMA */ - hwif->dma_off_quietly(drive); + if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) && + drive->using_dma) + hwif->dma_host_set(drive, 1); + else if (hwif->dma_host_set) /* check if host supports DMA */ + ide_dma_off_quietly(drive); #endif switch(speed) { @@ -1012,10 +1011,10 @@ static void check_dma_crc(ide_drive_t *drive) { #ifdef CONFIG_BLK_DEV_IDEDMA if (drive->crc_count) { - drive->hwif->dma_off_quietly(drive); + ide_dma_off_quietly(drive); ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive)); if (drive->current_speed >= XFER_SW_DMA_0) - (void) HWIF(drive)->ide_dma_on(drive); + ide_dma_on(drive); } else ide_dma_off(drive); #endif diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index a3bd8e8..9b44fbd 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -454,8 +454,7 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) static void ide_dump_opcode(ide_drive_t *drive) { struct request *rq; - u8 opcode = 0; - int found = 0; + ide_task_t *task = NULL; spin_lock(&ide_lock); rq = NULL; @@ -464,25 +463,15 @@ static void ide_dump_opcode(ide_drive_t *drive) spin_unlock(&ide_lock); if (!rq) return; - if (rq->cmd_type == REQ_TYPE_ATA_CMD) { - char *args = rq->buffer; - if (args) { - opcode = args[0]; - found = 1; - } - } else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - ide_task_t *args = rq->special; - if (args) { - opcode = args->tf.command; - found = 1; - } - } + + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) + task = rq->special; printk("ide: failed opcode was: "); - if (!found) - printk("unknown\n"); + if (task == NULL) + printk(KERN_CONT "unknown\n"); else - printk("0x%02x\n", opcode); + printk(KERN_CONT "0x%02x\n", task->tf.command); } u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index e245521..cbbb0f7 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -31,7 +31,6 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id { hw_regs_t hw; ide_hwif_t *hwif; - int index; if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0))) return -1; @@ -41,11 +40,19 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id pnp_port_start(dev, 1)); hw.irq = pnp_irq(dev, 0); - index = ide_register_hw(&hw, NULL, 1, &hwif); + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif) { + u8 index = hwif->index; + u8 idx[4] = { index, 0xff, 0xff, 0xff }; + + ide_init_port_data(hwif, index); + ide_init_port_hw(hwif, &hw); - if (index != -1) { - printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); + printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev,hwif); + + ide_device_add(idx); + return 0; } @@ -68,12 +75,15 @@ static struct pnp_driver idepnp_driver = { .remove = idepnp_remove, }; -void __init pnpide_init(void) +static int __init pnpide_init(void) { - pnp_register_driver(&idepnp_driver); + return pnp_register_driver(&idepnp_driver); } -void __exit pnpide_exit(void) +static void __exit pnpide_exit(void) { pnp_unregister_driver(&idepnp_driver); } + +module_init(pnpide_init); +module_exit(pnpide_exit); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0379d1f..edf650b 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -235,9 +235,6 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) drive->media = ide_disk; printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" ); - if (hwif->quirkproc) - drive->quirk_list = hwif->quirkproc(drive); - return; err_misc: @@ -353,22 +350,19 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd) * the irq handler isn't expecting. */ if (IDE_CONTROL_REG) { - u8 ctl = drive->ctl | 2; if (!hwif->irq) { autoprobe = 1; cookie = probe_irq_on(); - /* enable device irq */ - ctl &= ~2; } - hwif->OUTB(ctl, IDE_CONTROL_REG); + ide_set_irq(drive, autoprobe); } retval = actual_try_to_identify(drive, cmd); if (autoprobe) { int irq; - /* mask device irq */ - hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG); + + ide_set_irq(drive, 0); /* clear drive IRQ */ (void) hwif->INB(IDE_STATUS_REG); udelay(5); @@ -388,6 +382,20 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd) return retval; } +static int ide_busy_sleep(ide_hwif_t *hwif) +{ + unsigned long timeout = jiffies + WAIT_WORSTCASE; + u8 stat; + + do { + msleep(50); + stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); + if ((stat & BUSY_STAT) == 0) + return 0; + } while (time_before(jiffies, timeout)); + + return 1; +} /** * do_probe - probe an IDE device @@ -456,7 +464,6 @@ static int do_probe (ide_drive_t *drive, u8 cmd) if ((rc == 1 && cmd == WIN_PIDENTIFY) && ((drive->autotune == IDE_TUNE_DEFAULT) || (drive->autotune == IDE_TUNE_AUTO))) { - unsigned long timeout; printk("%s: no response (status = 0x%02x), " "resetting drive\n", drive->name, hwif->INB(IDE_STATUS_REG)); @@ -464,10 +471,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) hwif->OUTB(drive->select.all, IDE_SELECT_REG); msleep(50); hwif->OUTB(WIN_SRST, IDE_COMMAND_REG); - timeout = jiffies; - while (((hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && - time_before(jiffies, timeout + WAIT_WORSTCASE)) - msleep(50); + (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } if (rc == 1) @@ -495,20 +499,16 @@ static int do_probe (ide_drive_t *drive, u8 cmd) static void enable_nest (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - unsigned long timeout; printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); msleep(50); hwif->OUTB(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG); - timeout = jiffies + WAIT_WORSTCASE; - do { - if (time_after(jiffies, timeout)) { - printk("failed (timeout)\n"); - return; - } - msleep(50); - } while ((hwif->INB(IDE_STATUS_REG)) & BUSY_STAT); + + if (ide_busy_sleep(hwif)) { + printk(KERN_CONT "failed (timeout)\n"); + return; + } msleep(50); @@ -656,8 +656,7 @@ static int wait_hwif_ready(ide_hwif_t *hwif) /* Ignore disks that we will not probe for later. */ if (!drive->noprobe || drive->present) { SELECT_DRIVE(drive); - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); + ide_set_irq(drive, 1); mdelay(2); rc = ide_wait_not_busy(hwif, 35000); if (rc) @@ -676,19 +675,18 @@ out: /** * ide_undecoded_slave - look for bad CF adapters - * @hwif: interface + * @drive1: drive * * Analyse the drives on the interface and attempt to decide if we * have the same drive viewed twice. This occurs with crap CF adapters * and PCMCIA sometimes. */ -void ide_undecoded_slave(ide_hwif_t *hwif) +void ide_undecoded_slave(ide_drive_t *drive1) { - ide_drive_t *drive0 = &hwif->drives[0]; - ide_drive_t *drive1 = &hwif->drives[1]; + ide_drive_t *drive0 = &drive1->hwif->drives[0]; - if (drive0->present == 0 || drive1->present == 0) + if ((drive1->dn & 1) == 0 || drive0->present == 0) return; /* If the models don't match they are not the same product */ @@ -791,18 +789,11 @@ static void probe_hwif(ide_hwif_t *hwif) } } if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) { - unsigned long timeout = jiffies + WAIT_WORSTCASE; - u8 stat; - printk(KERN_WARNING "%s: reset\n", hwif->name); hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]); udelay(10); hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - do { - msleep(50); - stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); - } while ((stat & BUSY_STAT) && time_after(timeout, jiffies)); - + (void)ide_busy_sleep(hwif); } local_irq_restore(flags); /* @@ -817,8 +808,12 @@ static void probe_hwif(ide_hwif_t *hwif) return; } - if (hwif->fixup) - hwif->fixup(hwif); + for (unit = 0; unit < MAX_DRIVES; unit++) { + ide_drive_t *drive = &hwif->drives[unit]; + + if (drive->present && hwif->quirkproc) + hwif->quirkproc(drive); + } for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; @@ -833,7 +828,7 @@ static void probe_hwif(ide_hwif_t *hwif) drive->nice1 = 1; - if (hwif->ide_dma_on) + if (hwif->dma_host_set) ide_set_dma(drive); } } @@ -848,25 +843,6 @@ static void probe_hwif(ide_hwif_t *hwif) } } -static int hwif_init(ide_hwif_t *hwif); -static void hwif_register_devices(ide_hwif_t *hwif); - -static int probe_hwif_init(ide_hwif_t *hwif) -{ - probe_hwif(hwif); - - if (!hwif_init(hwif)) { - printk(KERN_INFO "%s: failed to initialize IDE interface\n", - hwif->name); - return -1; - } - - if (hwif->present) - hwif_register_devices(hwif); - - return 0; -} - #if MAX_HWIFS > 1 /* * save_match() is used to simplify logic in init_irq() below. @@ -1359,54 +1335,63 @@ static void hwif_register_devices(ide_hwif_t *hwif) } } -int ideprobe_init (void) +int ide_device_add_all(u8 *idx) { - unsigned int index; - int probe[MAX_HWIFS]; - - memset(probe, 0, MAX_HWIFS * sizeof(int)); - for (index = 0; index < MAX_HWIFS; ++index) - probe[index] = !ide_hwifs[index].present; - - for (index = 0; index < MAX_HWIFS; ++index) - if (probe[index]) - probe_hwif(&ide_hwifs[index]); - for (index = 0; index < MAX_HWIFS; ++index) - if (probe[index]) - hwif_init(&ide_hwifs[index]); - for (index = 0; index < MAX_HWIFS; ++index) { - if (probe[index]) { - ide_hwif_t *hwif = &ide_hwifs[index]; - if (!hwif->present) - continue; - if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) - hwif->chipset = ide_generic; - hwif_register_devices(hwif); + ide_hwif_t *hwif; + int i, rc = 0; + + for (i = 0; i < MAX_HWIFS; i++) { + if (idx[i] == 0xff) + continue; + + probe_hwif(&ide_hwifs[idx[i]]); + } + + for (i = 0; i < MAX_HWIFS; i++) { + if (idx[i] == 0xff) + continue; + + hwif = &ide_hwifs[idx[i]]; + + if (hwif_init(hwif) == 0) { + printk(KERN_INFO "%s: failed to initialize IDE " + "interface\n", hwif->name); + rc = -1; + continue; } } - for (index = 0; index < MAX_HWIFS; ++index) - if (probe[index]) - ide_proc_register_port(&ide_hwifs[index]); - return 0; -} -EXPORT_SYMBOL_GPL(ideprobe_init); + for (i = 0; i < MAX_HWIFS; i++) { + if (idx[i] == 0xff) + continue; -int ide_device_add(u8 idx[4]) -{ - int i, rc = 0; + hwif = &ide_hwifs[idx[i]]; - for (i = 0; i < 4; i++) { - if (idx[i] != 0xff) - rc |= probe_hwif_init(&ide_hwifs[idx[i]]); + if (hwif->present) { + if (hwif->chipset == ide_unknown || + hwif->chipset == ide_forced) + hwif->chipset = ide_generic; + hwif_register_devices(hwif); + } } - for (i = 0; i < 4; i++) { + for (i = 0; i < MAX_HWIFS; i++) { if (idx[i] != 0xff) ide_proc_register_port(&ide_hwifs[idx[i]]); } return rc; } +EXPORT_SYMBOL_GPL(ide_device_add_all); + +int ide_device_add(u8 idx[4]) +{ + u8 idx_all[MAX_HWIFS]; + int i; + for (i = 0; i < MAX_HWIFS; i++) + idx_all[i] = (i < 4) ? idx[i] : 0xff; + + return ide_device_add_all(idx_all); +} EXPORT_SYMBOL_GPL(ide_device_add); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index a4007d3..aa663e7 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -346,14 +346,20 @@ static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int va static int set_xfer_rate (ide_drive_t *drive, int arg) { + ide_task_t task; int err; if (arg < 0 || arg > 70) return -EINVAL; - err = ide_wait_cmd(drive, - WIN_SETFEATURES, (u8) arg, - SETFEATURES_XFER, 0, NULL); + memset(&task, 0, sizeof(task)); + task.tf.command = WIN_SETFEATURES; + task.tf.feature = SETFEATURES_XFER; + task.tf.nsect = (u8)arg; + task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT | + IDE_TFLAG_IN_NSECT; + + err = ide_no_data_taskfile(drive, &task); if (!err && arg) { ide_set_xfer_rate(drive, (u8) arg); diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c new file mode 100644 index 0000000..7ffa332 --- /dev/null +++ b/drivers/ide/ide-scan-pci.c @@ -0,0 +1,121 @@ +/* + * support for probing IDE PCI devices in the PCI bus order + * + * Copyright (c) 1998-2000 Andre Hedrick <andre@xxxxxxxxxxxxx> + * Copyright (c) 1995-1998 Mark Lord + * + * May be copied or modified under the terms of the GNU General Public License + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/ide.h> + +/* + * Module interfaces + */ + +static int pre_init = 1; /* Before first ordered IDE scan */ +static LIST_HEAD(ide_pci_drivers); + +/* + * __ide_pci_register_driver - attach IDE driver + * @driver: pci driver + * @module: owner module of the driver + * + * Registers a driver with the IDE layer. The IDE layer arranges that + * boot time setup is done in the expected device order and then + * hands the controllers off to the core PCI code to do the rest of + * the work. + * + * Returns are the same as for pci_register_driver + */ + +int __ide_pci_register_driver(struct pci_driver *driver, struct module *module, + const char *mod_name) +{ + if (!pre_init) + return __pci_register_driver(driver, module, mod_name); + driver->driver.owner = module; + list_add_tail(&driver->node, &ide_pci_drivers); + return 0; +} +EXPORT_SYMBOL_GPL(__ide_pci_register_driver); + +/** + * ide_scan_pcidev - find an IDE driver for a device + * @dev: PCI device to check + * + * Look for an IDE driver to handle the device we are considering. + * This is only used during boot up to get the ordering correct. After + * boot up the pci layer takes over the job. + */ + +static int __init ide_scan_pcidev(struct pci_dev *dev) +{ + struct list_head *l; + struct pci_driver *d; + + list_for_each(l, &ide_pci_drivers) { + d = list_entry(l, struct pci_driver, node); + if (d->id_table) { + const struct pci_device_id *id = + pci_match_id(d->id_table, dev); + + if (id != NULL && d->probe(dev, id) >= 0) { + dev->driver = d; + pci_dev_get(dev); + return 1; + } + } + } + return 0; +} + +/** + * ide_scan_pcibus - perform the initial IDE driver scan + * + * Perform the initial bus rather than driver ordered scan of the + * PCI drivers. After this all IDE pci handling becomes standard + * module ordering not traditionally ordered. + */ + +int __init ide_scan_pcibus(void) +{ + struct pci_dev *dev = NULL; + struct pci_driver *d; + struct list_head *l, *n; + + pre_init = 0; + if (!ide_scan_direction) + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) + ide_scan_pcidev(dev); + else + while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, + dev))) + ide_scan_pcidev(dev); + + /* + * Hand the drivers over to the PCI layer now we + * are post init. + */ + + list_for_each_safe(l, n, &ide_pci_drivers) { + list_del(l); + d = list_entry(l, struct pci_driver, node); + if (__pci_register_driver(d, d->driver.owner, + d->driver.mod_name)) + printk(KERN_ERR "%s: failed to register %s driver\n", + __FUNCTION__, d->driver.mod_name); + } + + return 0; +} + +static int __init ide_scan_pci(void) +{ + return ide_scan_pcibus(); +} + +module_init(ide_scan_pci); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3cbca3f..d71a584 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1690,6 +1690,11 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) if (error) tape->failed_pc = NULL; + if (!blk_special_request(rq)) { + ide_end_request(drive, uptodate, nr_sects); + return 0; + } + spin_lock_irqsave(&tape->spinlock, flags); /* The request was a pipelined data transfer request */ diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 2d63ea9..5eb6fa1 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -35,34 +35,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -static void ata_bswap_data (void *buffer, int wcount) -{ - u16 *p = buffer; - - while (wcount--) { - *p = *p << 8 | *p >> 8; p++; - *p = *p << 8 | *p >> 8; p++; - } -} - -static void taskfile_input_data(ide_drive_t *drive, void *buffer, u32 wcount) -{ - HWIF(drive)->ata_input_data(drive, buffer, wcount); - if (drive->bswap) - ata_bswap_data(buffer, wcount); -} - -static void taskfile_output_data(ide_drive_t *drive, void *buffer, u32 wcount) -{ - if (drive->bswap) { - ata_bswap_data(buffer, wcount); - HWIF(drive)->ata_output_data(drive, buffer, wcount); - ata_bswap_data(buffer, wcount); - } else { - HWIF(drive)->ata_output_data(drive, buffer, wcount); - } -} - void ide_tf_load(ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = drive->hwif; @@ -77,10 +49,13 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", drive->name, tf->feature, tf->nsect, tf->lbal, tf->lbam, tf->lbah, tf->device, tf->command); + printk("%s: hob: nsect 0x%02x lbal 0x%02x " + "lbam 0x%02x lbah 0x%02x\n", + drive->name, tf->hob_nsect, tf->hob_lbal, + tf->hob_lbam, tf->hob_lbah); #endif - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */ + ide_set_irq(drive, 1); if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) SELECT_MASK(drive, 0); @@ -124,7 +99,7 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) args.tf.command = WIN_IDENTIFY; else args.tf.command = WIN_PIDENTIFY; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; args.data_phase = TASKFILE_IN; return ide_raw_taskfile(drive, &args, buf, 1); } @@ -285,7 +260,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive) return ide_stopped; } -static u8 wait_drive_not_busy(ide_drive_t *drive) +u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries; @@ -293,8 +268,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) /* * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms - * (drive_cmd_intr() waits that long). + * This can take up to 10 usec, but we will wait max 1 ms. */ for (retries = 0; retries < 100; retries++) { if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) @@ -349,9 +323,9 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write) /* do the actual data transfer */ if (write) - taskfile_output_data(drive, buf, SECTOR_WORDS); + hwif->ata_output_data(drive, buf, SECTOR_WORDS); else - taskfile_input_data(drive, buf, SECTOR_WORDS); + hwif->ata_input_data(drive, buf, SECTOR_WORDS); kunmap_atomic(buf, KM_BIO_SRC_IRQ); #ifdef CONFIG_HIGHMEM @@ -371,9 +345,18 @@ static void ide_pio_multi(ide_drive_t *drive, unsigned int write) static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, unsigned int write) { + u8 saved_io_32bit = drive->io_32bit; + if (rq->bio) /* fs request */ rq->errors = 0; + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { + ide_task_t *task = rq->special; + + if (task->tf_flags & IDE_TFLAG_IO_16BIT) + drive->io_32bit = 0; + } + touch_softlockup_watchdog(); switch (drive->hwif->data_phase) { @@ -385,6 +368,8 @@ static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, ide_pio_sector(drive, write); break; } + + drive->io_32bit = saved_io_32bit; } static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, @@ -422,27 +407,22 @@ static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, return ide_error(drive, s, stat); } -static void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) +void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) { - HWIF(drive)->cursg = NULL; - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - ide_task_t *task = rq->special; + u8 err = drive->hwif->INB(IDE_ERROR_REG); - if (task->tf_flags & IDE_TFLAG_FLAGGED) { - u8 err = drive->hwif->INB(IDE_ERROR_REG); - ide_end_drive_cmd(drive, stat, err); - return; - } + ide_end_drive_cmd(drive, stat, err); + return; } if (rq->rq_disk) { ide_driver_t *drv; drv = *(ide_driver_t **)rq->rq_disk->private_data;; - drv->end_request(drive, 1, rq->hard_nr_sectors); + drv->end_request(drive, 1, rq->nr_sectors); } else - ide_end_request(drive, 1, rq->hard_nr_sectors); + ide_end_request(drive, 1, rq->nr_sectors); } /* @@ -455,7 +435,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) u8 stat = hwif->INB(IDE_STATUS_REG); /* new way for dealing with premature shared PCI interrupts */ - if (!OK_STAT(stat, DATA_READY, BAD_R_STAT)) { + if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) { if (stat & (ERR_STAT | DRQ_STAT)) return task_error(drive, rq, __FUNCTION__, stat); /* No data yet, so wait for another IRQ. */ @@ -468,7 +448,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) /* If it was the last datablock check status and finish transfer. */ if (!hwif->nleft) { stat = wait_drive_not_busy(drive); - if (!OK_STAT(stat, 0, BAD_R_STAT)) + if (!OK_STAT(stat, 0, BAD_STAT)) return task_error(drive, rq, __FUNCTION__, stat); task_end_request(drive, rq, stat); return ide_stopped; @@ -512,7 +492,7 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; - if (ide_wait_stat(&startstop, drive, DATA_READY, + if (ide_wait_stat(&startstop, drive, DRQ_STAT, drive->bad_wstat, WAIT_DRQ)) { printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", drive->name, @@ -580,7 +560,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) unsigned int taskin = 0; unsigned int taskout = 0; u16 nsect = 0; - u8 io_32bit = drive->io_32bit; char __user *buf = (char __user *)arg; // printk("IDE Taskfile ...\n"); @@ -633,9 +612,10 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) args.data_phase = req_task->data_phase; - args.tf_flags = IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | + IDE_TFLAG_IN_TF; if (drive->addressing == 1) - args.tf_flags |= IDE_TFLAG_LBA48; + args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); if (req_task->out_flags.all) { args.tf_flags |= IDE_TFLAG_FLAGGED; @@ -671,7 +651,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) if (req_task->in_flags.b.data) args.tf_flags |= IDE_TFLAG_IN_DATA; - drive->io_32bit = 0; switch(req_task->data_phase) { case TASKFILE_MULTI_OUT: if (!drive->mult_count) { @@ -767,41 +746,24 @@ abort: // printk("IDE Taskfile ioctl ended. rc = %i\n", err); - drive->io_32bit = io_32bit; - return err; } #endif -int ide_wait_cmd (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf) -{ - struct request rq; - u8 buffer[4]; - - if (!buf) - buf = buffer; - memset(buf, 0, 4 + SECTOR_WORDS * 4 * sectors); - ide_init_drive_cmd(&rq); - rq.buffer = buf; - *buf++ = cmd; - *buf++ = nsect; - *buf++ = feature; - *buf++ = sectors; - return ide_do_drive_cmd(drive, &rq, ide_wait); -} - int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) { - int err = 0; - u8 args[4], *argbuf = args; - u8 xfer_rate = 0; - int argsize = 4; + u8 *buf = NULL; + int bufsize = 0, err = 0; + u8 args[4], xfer_rate = 0; ide_task_t tfargs; struct ide_taskfile *tf = &tfargs.tf; if (NULL == (void *) arg) { struct request rq; + ide_init_drive_cmd(&rq); + rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + return ide_do_drive_cmd(drive, &rq, ide_wait); } @@ -810,23 +772,39 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) memset(&tfargs, 0, sizeof(ide_task_t)); tf->feature = args[2]; - tf->nsect = args[3]; - tf->lbal = args[1]; + if (args[0] == WIN_SMART) { + tf->nsect = args[3]; + tf->lbal = args[1]; + tf->lbam = 0x4f; + tf->lbah = 0xc2; + tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; + } else { + tf->nsect = args[1]; + tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE | + IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT; + } tf->command = args[0]; + tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA; if (args[3]) { - argsize = 4 + (SECTOR_WORDS * 4 * args[3]); - argbuf = kzalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) + tfargs.tf_flags |= IDE_TFLAG_IO_16BIT; + bufsize = SECTOR_WORDS * 4 * args[3]; + buf = kzalloc(bufsize, GFP_KERNEL); + if (buf == NULL) return -ENOMEM; } + if (set_transfer(drive, &tfargs)) { xfer_rate = args[1]; if (ide_ata66_check(drive, &tfargs)) goto abort; } - err = ide_wait_cmd(drive, args[0], args[1], args[2], args[3], argbuf); + err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); + + args[0] = tf->status; + args[1] = tf->error; + args[2] = tf->nsect; if (!err && xfer_rate) { /* active-retuning-calls future */ @@ -834,10 +812,13 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) ide_driveid_update(drive); } abort: - if (copy_to_user((void __user *)arg, argbuf, argsize)) + if (copy_to_user((void __user *)arg, &args, 4)) err = -EFAULT; - if (argsize > 4) - kfree(argbuf); + if (buf) { + if (copy_to_user((void __user *)(arg + 4), buf, bufsize)) + err = -EFAULT; + kfree(buf); + } return err; } @@ -854,7 +835,7 @@ int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) memset(&task, 0, sizeof(task)); memcpy(&task.tf_array[7], &args[1], 6); task.tf.command = args[0]; - task.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; err = ide_no_data_taskfile(drive, &task); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index c6d4f63..97894ab 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -95,7 +95,7 @@ DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); #ifdef CONFIG_IDEPCI_PCIBUS_ORDER -static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */ +int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */ #endif int noautodma = 0; @@ -116,7 +116,7 @@ EXPORT_SYMBOL(ide_hwifs); /* * Do not even *think* about calling this! */ -static void init_hwif_data(ide_hwif_t *hwif, unsigned int index) +void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) { unsigned int unit; @@ -159,6 +159,7 @@ static void init_hwif_data(ide_hwif_t *hwif, unsigned int index) init_completion(&drive->gendev_rel_comp); } } +EXPORT_SYMBOL_GPL(ide_init_port_data); static void init_hwif_default(ide_hwif_t *hwif, unsigned int index) { @@ -177,8 +178,6 @@ static void init_hwif_default(ide_hwif_t *hwif, unsigned int index) #endif } -extern void ide_arm_init(void); - /* * init_ide_data() sets reasonable default values into all fields * of all instances of the hwifs and drives, but only on the first call. @@ -210,16 +209,13 @@ static void __init init_ide_data (void) /* Initialise all interface structures */ for (index = 0; index < MAX_HWIFS; ++index) { hwif = &ide_hwifs[index]; - init_hwif_data(hwif, index); + ide_init_port_data(hwif, index); init_hwif_default(hwif, index); #if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI) hwif->irq = ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]); #endif } -#ifdef CONFIG_IDE_ARM - ide_arm_init(); -#endif } /** @@ -414,8 +410,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->cds = tmp_hwif->cds; #endif - hwif->fixup = tmp_hwif->fixup; - hwif->set_pio_mode = tmp_hwif->set_pio_mode; hwif->set_dma_mode = tmp_hwif->set_dma_mode; hwif->mdma_filter = tmp_hwif->mdma_filter; @@ -433,16 +427,13 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->atapi_input_bytes = tmp_hwif->atapi_input_bytes; hwif->atapi_output_bytes = tmp_hwif->atapi_output_bytes; + hwif->dma_host_set = tmp_hwif->dma_host_set; hwif->dma_setup = tmp_hwif->dma_setup; hwif->dma_exec_cmd = tmp_hwif->dma_exec_cmd; hwif->dma_start = tmp_hwif->dma_start; hwif->ide_dma_end = tmp_hwif->ide_dma_end; - hwif->ide_dma_on = tmp_hwif->ide_dma_on; - hwif->dma_off_quietly = tmp_hwif->dma_off_quietly; hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq; hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq; - hwif->dma_host_on = tmp_hwif->dma_host_on; - hwif->dma_host_off = tmp_hwif->dma_host_off; hwif->dma_lost_irq = tmp_hwif->dma_lost_irq; hwif->dma_timeout = tmp_hwif->dma_timeout; @@ -614,7 +605,7 @@ void ide_unregister(unsigned int index) tmp_hwif = *hwif; /* restore hwif data to pristine status */ - init_hwif_data(hwif, index); + ide_init_port_data(hwif, index); init_hwif_default(hwif, index); ide_hwif_restore(hwif, &tmp_hwif); @@ -680,24 +671,34 @@ void ide_setup_ports ( hw_regs_t *hw, */ } +void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) +{ + memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); + hwif->irq = hw->irq; + hwif->noprobe = 0; + hwif->chipset = hw->chipset; + hwif->gendev.parent = hw->dev; + hwif->ack_intr = hw->ack_intr; +} +EXPORT_SYMBOL_GPL(ide_init_port_hw); + /** * ide_register_hw - register IDE interface * @hw: hardware registers - * @fixup: fixup function - * @initializing: set while initializing built-in drivers + * @quirkproc: quirkproc function * @hwifp: pointer to returned hwif * * Register an IDE interface, specifying exactly the registers etc. - * Set init=1 iff calling before probes have taken place. * * Returns -1 on error. */ -int ide_register_hw(hw_regs_t *hw, void (*fixup)(ide_hwif_t *), - int initializing, ide_hwif_t **hwifp) +int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), + ide_hwif_t **hwifp) { int index, retry = 1; ide_hwif_t *hwif; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; do { for (index = 0; index < MAX_HWIFS; ++index) { @@ -709,8 +710,7 @@ int ide_register_hw(hw_regs_t *hw, void (*fixup)(ide_hwif_t *), hwif = &ide_hwifs[index]; if (hwif->hold) continue; - if ((!hwif->present && !hwif->mate && !initializing) || - (!hwif->io_ports[IDE_DATA_OFFSET] && initializing)) + if (!hwif->present && hwif->mate == NULL) goto found; } for (index = 0; index < MAX_HWIFS; index++) @@ -721,29 +721,23 @@ found: if (hwif->present) ide_unregister(index); else if (!hwif->hold) { - init_hwif_data(hwif, index); + ide_init_port_data(hwif, index); init_hwif_default(hwif, index); } if (hwif->present) return -1; - memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); - hwif->irq = hw->irq; - hwif->noprobe = 0; - hwif->fixup = fixup; - hwif->chipset = hw->chipset; - hwif->gendev.parent = hw->dev; - hwif->ack_intr = hw->ack_intr; - if (initializing == 0) { - u8 idx[4] = { index, 0xff, 0xff, 0xff }; + ide_init_port_hw(hwif, hw); + hwif->quirkproc = quirkproc; - ide_device_add(idx); - } + idx[0] = index; + + ide_device_add(idx); if (hwifp) *hwifp = hwif; - return (initializing || hwif->present) ? index : -1; + return hwif->present ? index : -1; } EXPORT_SYMBOL(ide_register_hw); @@ -836,7 +830,7 @@ int set_using_dma(ide_drive_t *drive, int arg) if (!drive->id || !(drive->id->capability & 1)) goto out; - if (hwif->ide_dma_on == NULL) + if (hwif->dma_host_set == NULL) goto out; err = -EBUSY; @@ -884,7 +878,10 @@ int set_pio_mode(ide_drive_t *drive, int arg) if (drive->special.b.set_tune) return -EBUSY; + ide_init_drive_cmd(&rq); + rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + drive->tune_req = (u8) arg; drive->special.b.set_tune = 1; (void) ide_do_drive_cmd(drive, &rq, ide_wait); @@ -1066,7 +1063,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device ide_init_hwif_ports(&hw, (unsigned long) args[0], (unsigned long) args[1], NULL); hw.irq = args[2]; - if (ide_register_hw(&hw, NULL, 0, NULL) == -1) + if (ide_register_hw(&hw, NULL, NULL) == -1) return -EIO; return 0; } @@ -1227,26 +1224,12 @@ static int __init match_parm (char *s, const char *keywords[], int vals[], int m return 0; /* zero = nothing matched */ } -#ifdef CONFIG_BLK_DEV_ALI14XX extern int probe_ali14xx; -extern int ali14xx_init(void); -#endif -#ifdef CONFIG_BLK_DEV_UMC8672 extern int probe_umc8672; -extern int umc8672_init(void); -#endif -#ifdef CONFIG_BLK_DEV_DTC2278 extern int probe_dtc2278; -extern int dtc2278_init(void); -#endif -#ifdef CONFIG_BLK_DEV_HT6560B extern int probe_ht6560b; -extern int ht6560b_init(void); -#endif -#ifdef CONFIG_BLK_DEV_QD65XX extern int probe_qd65xx; -extern int qd65xx_init(void); -#endif +extern int cmd640_vlb; static int __initdata is_chipset_set[MAX_HWIFS]; @@ -1323,7 +1306,7 @@ static int __init ide_setup(char *s) if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { const char *hd_words[] = { "none", "noprobe", "nowerr", "cdrom", "nodma", - "autotune", "noautotune", "minus8", "swapdata", "bswap", + "autotune", "noautotune", "-8", "-9", "-10", "noflush", "remap", "remap63", "scsi", NULL }; unit = s[2] - 'a'; hw = unit / MAX_DRIVES; @@ -1359,10 +1342,6 @@ static int __init ide_setup(char *s) case -7: /* "noautotune" */ drive->autotune = IDE_TUNE_NOAUTO; goto obsolete_option; - case -9: /* "swapdata" */ - case -10: /* "bswap" */ - drive->bswap = 1; - goto done; case -11: /* noflush */ drive->noflush = 1; goto done; @@ -1462,11 +1441,8 @@ static int __init ide_setup(char *s) #endif #ifdef CONFIG_BLK_DEV_CMD640 case -14: /* "cmd640_vlb" */ - { - extern int cmd640_vlb; /* flag for cmd640.c */ cmd640_vlb = 1; goto done; - } #endif #ifdef CONFIG_BLK_DEV_HT6560B case -13: /* "ht6560b" */ @@ -1556,79 +1532,6 @@ done: return 1; } -extern void __init pnpide_init(void); -extern void __exit pnpide_exit(void); -extern void __init h8300_ide_init(void); - -/* - * probe_for_hwifs() finds/initializes "known" IDE interfaces - */ -static void __init probe_for_hwifs (void) -{ -#ifdef CONFIG_IDEPCI_PCIBUS_ORDER - ide_scan_pcibus(ide_scan_direction); -#endif - -#ifdef CONFIG_ETRAX_IDE - { - extern void init_e100_ide(void); - init_e100_ide(); - } -#endif /* CONFIG_ETRAX_IDE */ -#ifdef CONFIG_BLK_DEV_CMD640 - { - extern void ide_probe_for_cmd640x(void); - ide_probe_for_cmd640x(); - } -#endif /* CONFIG_BLK_DEV_CMD640 */ -#ifdef CONFIG_BLK_DEV_IDE_PMAC - { - extern int pmac_ide_probe(void); - (void)pmac_ide_probe(); - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#ifdef CONFIG_BLK_DEV_GAYLE - { - extern void gayle_init(void); - gayle_init(); - } -#endif /* CONFIG_BLK_DEV_GAYLE */ -#ifdef CONFIG_BLK_DEV_FALCON_IDE - { - extern void falconide_init(void); - falconide_init(); - } -#endif /* CONFIG_BLK_DEV_FALCON_IDE */ -#ifdef CONFIG_BLK_DEV_MAC_IDE - { - extern void macide_init(void); - macide_init(); - } -#endif /* CONFIG_BLK_DEV_MAC_IDE */ -#ifdef CONFIG_BLK_DEV_Q40IDE - { - extern void q40ide_init(void); - q40ide_init(); - } -#endif /* CONFIG_BLK_DEV_Q40IDE */ -#ifdef CONFIG_BLK_DEV_BUDDHA - { - extern void buddha_init(void); - buddha_init(); - } -#endif /* CONFIG_BLK_DEV_BUDDHA */ -#ifdef CONFIG_BLK_DEV_IDEPNP - pnpide_init(); -#endif -#ifdef CONFIG_H8300 - h8300_ide_init(); -#endif -} - -/* - * Probe module - */ - EXPORT_SYMBOL(ide_lock); static int ide_bus_match(struct device *dev, struct device_driver *drv) @@ -1775,30 +1678,6 @@ static int __init ide_init(void) proc_ide_create(); -#ifdef CONFIG_BLK_DEV_ALI14XX - if (probe_ali14xx) - (void)ali14xx_init(); -#endif -#ifdef CONFIG_BLK_DEV_UMC8672 - if (probe_umc8672) - (void)umc8672_init(); -#endif -#ifdef CONFIG_BLK_DEV_DTC2278 - if (probe_dtc2278) - (void)dtc2278_init(); -#endif -#ifdef CONFIG_BLK_DEV_HT6560B - if (probe_ht6560b) - (void)ht6560b_init(); -#endif -#ifdef CONFIG_BLK_DEV_QD65XX - if (probe_qd65xx) - (void)qd65xx_init(); -#endif - - /* Probe for special PCI and other "known" interface chipsets. */ - probe_for_hwifs(); - return 0; } @@ -1834,10 +1713,6 @@ void __exit cleanup_module (void) for (index = 0; index < MAX_HWIFS; ++index) ide_unregister(index); -#ifdef CONFIG_BLK_DEV_IDEPNP - pnpide_exit(); -#endif - proc_ide_destroy(); bus_unregister(&ide_bus_type); diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile index 4098223..7043ec7 100644 --- a/drivers/ide/legacy/Makefile +++ b/drivers/ide/legacy/Makefile @@ -1,15 +1,24 @@ +# link order is important here + obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o +obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o -obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o -obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o +obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o +obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o +obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o +obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o +obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o -obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o +ifeq ($(CONFIG_BLK_DEV_IDECS), m) + obj-m += ide-cs.o +endif -# Last of all -obj-$(CONFIG_BLK_DEV_HD) += hd.o +ifeq ($(CONFIG_BLK_DEV_PLATFORM), m) + obj-m += ide_platform.o +endif EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 38c3a6d..5ec0be4 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -231,8 +231,7 @@ int probe_ali14xx = 0; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); -/* Can be called directly from ide.c. */ -int __init ali14xx_init(void) +static int __init ali14xx_init(void) { if (probe_ali14xx == 0) goto out; @@ -248,9 +247,7 @@ out: return -ENODEV; } -#ifdef MODULE module_init(ali14xx_init); -#endif MODULE_AUTHOR("see local file"); MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets"); diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 4a0be25..74d28e0 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -112,6 +112,7 @@ typedef enum BuddhaType_Enum { BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF } BuddhaType; +static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" }; /* * Check and acknowledge the interrupt status @@ -143,11 +144,11 @@ static int xsurf_ack_intr(ide_hwif_t *hwif) * Probe for a Buddha or Catweasel IDE interface */ -void __init buddha_init(void) +static int __init buddha_init(void) { hw_regs_t hw; ide_hwif_t *hwif; - int i, index; + int i; struct zorro_dev *z = NULL; u_long buddha_board = 0; @@ -156,6 +157,8 @@ void __init buddha_init(void) while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { unsigned long board; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) { buddha_num_hwifs = BUDDHA_NUM_HWIFS; type=BOARD_BUDDHA; @@ -195,7 +198,10 @@ fail_base2: /* X-Surf doesn't have this. IRQs are always on */ if (type != BOARD_XSURF) z_writeb(0, buddha_board+BUDDHA_IRQ_MR); - + + printk(KERN_INFO "ide: %s IDE controller\n", + buddha_board_name[type]); + for(i=0;i<buddha_num_hwifs;i++) { if(type != BOARD_XSURF) { ide_setup_ports(&hw, (buddha_board+buddha_bases[i]), @@ -213,23 +219,23 @@ fail_base2: IRQ_AMIGA_PORTS); } - index = ide_register_hw(&hw, NULL, 1, &hwif); - if (index != -1) { + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif) { + u8 index = hwif->index; + + ide_init_port_data(hwif, index); + ide_init_port_hw(hwif, &hw); + hwif->mmio = 1; - printk("ide%d: ", index); - switch(type) { - case BOARD_BUDDHA: - printk("Buddha"); - break; - case BOARD_CATWEASEL: - printk("Catweasel"); - break; - case BOARD_XSURF: - printk("X-Surf"); - break; - } - printk(" IDE interface\n"); - } + + idx[i] = index; + } } + + ide_device_add(idx); } + + return 0; } + +module_init(buddha_init); diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 24a845d..13eee6d 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -150,8 +150,7 @@ int probe_dtc2278 = 0; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); -/* Can be called directly from ide.c. */ -int __init dtc2278_init(void) +static int __init dtc2278_init(void) { if (probe_dtc2278 == 0) return -ENODEV; @@ -163,9 +162,7 @@ int __init dtc2278_init(void) return 0; } -#ifdef MODULE module_init(dtc2278_init); -#endif MODULE_AUTHOR("See Local File"); MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets"); diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 7d7936f..2860956 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -62,19 +62,31 @@ EXPORT_SYMBOL(falconide_intr_lock); * Probe for a Falcon IDE interface */ -void __init falconide_init(void) +static int __init falconide_init(void) { if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) { hw_regs_t hw; - int index; + + printk(KERN_INFO "ide: Falcon IDE controller\n"); ide_setup_ports(&hw, ATA_HD_BASE, falconide_offsets, 0, 0, NULL, // falconide_iops, IRQ_MFP_IDE); - index = ide_register_hw(&hw, NULL, 1, NULL); - if (index != -1) - printk("ide%d: Falcon IDE interface\n", index); + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif) { + u8 index = hwif->index; + u8 idx[4] = { index, 0xff, 0xff, 0xff }; + + ide_init_port_data(hwif, index); + ide_init_port_hw(hwif, &hw); + + ide_device_add(idx); + } } + + return 0; } + +module_init(falconide_init); diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index 53331ee..492fa04 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -110,12 +110,13 @@ static int gayle_ack_intr_a1200(ide_hwif_t *hwif) * Probe for a Gayle IDE interface (and optionally for an IDE doubler) */ -void __init gayle_init(void) +static int __init gayle_init(void) { int a4000, i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!MACH_IS_AMIGA) - return; + return -ENODEV; if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE)) goto found; @@ -125,15 +126,21 @@ void __init gayle_init(void) NULL)) goto found; #endif - return; + return -ENODEV; found: + printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n", + a4000 ? 4000 : 1200, +#ifdef CONFIG_BLK_DEV_IDEDOUBLER + ide_doubler ? ", IDE doubler" : +#endif + ""); + for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) { unsigned long base, ctrlport, irqport; ide_ack_intr_t *ack_intr; hw_regs_t hw; ide_hwif_t *hwif; - int index; unsigned long phys_base, res_start, res_n; if (a4000) { @@ -165,21 +172,23 @@ found: // &gayle_iops, IRQ_AMIGA_PORTS); - index = ide_register_hw(&hw, NULL, 1, &hwif); - if (index != -1) { + hwif = ide_find_port(base); + if (hwif) { + u8 index = hwif->index; + + ide_init_port_data(hwif, index); + ide_init_port_hw(hwif, &hw); + hwif->mmio = 1; - switch (i) { - case 0: - printk("ide%d: Gayle IDE interface (A%d style)\n", index, - a4000 ? 4000 : 1200); - break; -#ifdef CONFIG_BLK_DEV_IDEDOUBLER - case 1: - printk("ide%d: IDE doubler\n", index); - break; -#endif /* CONFIG_BLK_DEV_IDEDOUBLER */ - } + + idx[i] = index; } else release_mem_region(res_start, res_n); } + + ide_device_add(idx); + + return 0; } + +module_init(gayle_init); diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index a4245d1..8da5031 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -307,8 +307,7 @@ int probe_ht6560b = 0; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); -/* Can be called directly from ide.c. */ -int __init ht6560b_init(void) +static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; static u8 idx[4] = { 0, 1, 0xff, 0xff }; @@ -369,9 +368,7 @@ release_region: return -ENODEV; } -#ifdef MODULE module_init(ht6560b_init); -#endif MODULE_AUTHOR("See Local File"); MODULE_DESCRIPTION("HT-6560B EIDE-controller support"); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 03715c0..f4ea15b 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -153,7 +153,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq hw.irq = irq; hw.chipset = ide_pci; hw.dev = &handle->dev; - return ide_register_hw(&hw, &ide_undecoded_slave, 0, NULL); + return ide_register_hw(&hw, &ide_undecoded_slave, NULL); } /*====================================================================== diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 7bb79f5..69a0fb0 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -28,39 +28,27 @@ static struct { int index; } hwif_prop; -static ide_hwif_t *__devinit plat_ide_locate_hwif(void __iomem *base, - void __iomem *ctrl, struct pata_platform_info *pdata, int irq, - int mmio) +static void __devinit plat_ide_setup_ports(hw_regs_t *hw, + void __iomem *base, + void __iomem *ctrl, + struct pata_platform_info *pdata, + int irq) { unsigned long port = (unsigned long)base; - ide_hwif_t *hwif = ide_find_port(port); int i; - if (hwif == NULL) - goto out; - - hwif->io_ports[IDE_DATA_OFFSET] = port; + hw->io_ports[IDE_DATA_OFFSET] = port; port += (1 << pdata->ioport_shift); for (i = IDE_ERROR_OFFSET; i <= IDE_STATUS_OFFSET; i++, port += (1 << pdata->ioport_shift)) - hwif->io_ports[i] = port; - - hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; + hw->io_ports[i] = port; - hwif->irq = irq; + hw->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; - hwif->chipset = ide_generic; + hw->irq = irq; - if (mmio) { - hwif->mmio = 1; - default_hwif_mmiops(hwif); - } - - hwif_prop.hwif = hwif; - hwif_prop.index = hwif->index; -out: - return hwif; + hw->chipset = ide_generic; } static int __devinit plat_ide_probe(struct platform_device *pdev) @@ -71,6 +59,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; int ret = 0; int mmio = 0; + hw_regs_t hw; pdata = pdev->dev.platform_data; @@ -106,15 +95,27 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) res_alt->start, res_alt->end - res_alt->start + 1); } - hwif = plat_ide_locate_hwif(hwif_prop.plat_ide_mapbase, - hwif_prop.plat_ide_alt_mapbase, pdata, res_irq->start, mmio); - + hwif = ide_find_port((unsigned long)hwif_prop.plat_ide_mapbase); if (!hwif) { ret = -ENODEV; goto out; } - hwif->gendev.parent = &pdev->dev; - hwif->noprobe = 0; + + memset(&hw, 0, sizeof(hw)); + plat_ide_setup_ports(&hw, hwif_prop.plat_ide_mapbase, + hwif_prop.plat_ide_alt_mapbase, + pdata, res_irq->start); + hw.dev = &pdev->dev; + + ide_init_port_hw(hwif, &hw); + + if (mmio) { + hwif->mmio = 1; + default_hwif_mmiops(hwif); + } + + hwif_prop.hwif = hwif; + hwif_prop.index = hwif->index; idx[0] = hwif->index; diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 5c6aa77..782d4c7 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -77,15 +77,17 @@ int macide_ack_intr(ide_hwif_t* hwif) return 0; } +static const char *mac_ide_name[] = + { "Quadra", "Powerbook", "Powerbook Baboon" }; + /* * Probe for a Macintosh IDE interface */ -void __init macide_init(void) +static int __init macide_init(void) { hw_regs_t hw; ide_hwif_t *hwif; - int index = -1; switch (macintosh_config->ide_type) { case MAC_IDE_QUADRA: @@ -93,48 +95,50 @@ void __init macide_init(void) 0, 0, macide_ack_intr, // quadra_ide_iops, IRQ_NUBUS_F); - index = ide_register_hw(&hw, NULL, 1, &hwif); break; case MAC_IDE_PB: ide_setup_ports(&hw, IDE_BASE, macide_offsets, 0, 0, macide_ack_intr, // macide_pb_iops, IRQ_NUBUS_C); - index = ide_register_hw(&hw, NULL, 1, &hwif); break; case MAC_IDE_BABOON: ide_setup_ports(&hw, BABOON_BASE, macide_offsets, 0, 0, NULL, // macide_baboon_iops, IRQ_BABOON_1); - index = ide_register_hw(&hw, NULL, 1, &hwif); - if (index == -1) break; - if (macintosh_config->ident == MAC_MODEL_PB190) { + break; + default: + return -ENODEV; + } + + printk(KERN_INFO "ide: Macintosh %s IDE controller\n", + mac_ide_name[macintosh_config->ide_type - 1]); + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif) { + u8 index = hwif->index; + u8 idx[4] = { index, 0xff, 0xff, 0xff }; + + ide_init_port_data(hwif, index); + ide_init_port_hw(hwif, &hw); + + if (macintosh_config->ide_type == MAC_IDE_BABOON && + macintosh_config->ident == MAC_MODEL_PB190) { /* Fix breakage in ide-disk.c: drive capacity */ /* is not initialized for drives without a */ /* hardware ID, and we can't get that without */ /* probing the drive which freezes a 190. */ - - ide_drive_t *drive = &ide_hwifs[index].drives[0]; + ide_drive_t *drive = &hwif->drives[0]; drive->capacity64 = drive->cyl*drive->head*drive->sect; - } - break; - - default: - return; - } - if (index != -1) { hwif->mmio = 1; - if (macintosh_config->ide_type == MAC_IDE_QUADRA) - printk(KERN_INFO "ide%d: Macintosh Quadra IDE interface\n", index); - else if (macintosh_config->ide_type == MAC_IDE_PB) - printk(KERN_INFO "ide%d: Macintosh Powerbook IDE interface\n", index); - else if (macintosh_config->ide_type == MAC_IDE_BABOON) - printk(KERN_INFO "ide%d: Macintosh Powerbook Baboon IDE interface\n", index); - else - printk(KERN_INFO "ide%d: Unknown Macintosh IDE interface\n", index); + + ide_device_add(idx); } + + return 0; } + +module_init(macide_init); diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 6ea46a6..f532973 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -111,15 +111,17 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={ * Probe for Q40 IDE interfaces */ -void __init q40ide_init(void) +static int __init q40ide_init(void) { int i; ide_hwif_t *hwif; - int index; const char *name; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!MACH_IS_Q40) - return ; + return -ENODEV; + + printk(KERN_INFO "ide: Q40 IDE controller\n"); for (i = 0; i < Q40IDE_NUM_HWIFS; i++) { hw_regs_t hw; @@ -141,10 +143,20 @@ void __init q40ide_init(void) 0, NULL, // m68kide_iops, q40ide_default_irq(pcide_bases[i])); - index = ide_register_hw(&hw, NULL, 1, &hwif); - // **FIXME** - if (index != -1) + + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif) { + ide_init_port_data(hwif, hwif->index); + ide_init_port_hw(hwif, &hw); hwif->mmio = 1; + + idx[i] = hwif->index; + } } + + ide_device_add(idx); + + return 0; } +module_init(q40ide_init); diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 912e738..2bac4c1 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -478,8 +478,7 @@ int probe_qd65xx = 0; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); -/* Can be called directly from ide.c. */ -int __init qd65xx_init(void) +static int __init qd65xx_init(void) { if (probe_qd65xx == 0) return -ENODEV; @@ -492,9 +491,7 @@ int __init qd65xx_init(void) return 0; } -#ifdef MODULE module_init(qd65xx_init); -#endif MODULE_AUTHOR("Samuel Thibault"); MODULE_DESCRIPTION("support of qd65xx vlb ide chipset"); diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index 79577b9..a1ae1ae 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -169,8 +169,7 @@ int probe_umc8672 = 0; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); -/* Can be called directly from ide.c. */ -int __init umc8672_init(void) +static int __init umc8672_init(void) { if (probe_umc8672 == 0) goto out; @@ -181,9 +180,7 @@ out: return -ENODEV;; } -#ifdef MODULE module_init(umc8672_init); -#endif MODULE_AUTHOR("Wolfram Podien"); MODULE_DESCRIPTION("Support for UMC 8672 IDE chipset"); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index a4d0d4c..2d3e511 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -395,26 +395,10 @@ static int auide_dma_test_irq(ide_drive_t *drive) return 0; } -static void auide_dma_host_on(ide_drive_t *drive) +static void auide_dma_host_set(ide_drive_t *drive, int on) { } -static int auide_dma_on(ide_drive_t *drive) -{ - drive->using_dma = 1; - - return 0; -} - -static void auide_dma_host_off(ide_drive_t *drive) -{ -} - -static void auide_dma_off_quietly(ide_drive_t *drive) -{ - drive->using_dma = 0; -} - static void auide_dma_lost_irq(ide_drive_t *drive) { printk(KERN_ERR "%s: IRQ lost\n", drive->name); @@ -641,12 +625,13 @@ static int au_ide_probe(struct device *dev) /* FIXME: This might possibly break PCMCIA IDE devices */ hwif = &ide_hwifs[pdev->id]; - hwif->irq = ahwif->irq; - hwif->chipset = ide_au1xxx; memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); - memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); + hw.irq = ahwif->irq; + hw.chipset = ide_au1xxx; + + ide_init_port_hw(hwif, &hw); hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA @@ -660,7 +645,6 @@ static int au_ide_probe(struct device *dev) hwif->pio_mask = ATA_PIO4; hwif->host_flags = IDE_HFLAG_POST_SET_MODE; - hwif->noprobe = 0; hwif->drives[0].unmask = 1; hwif->drives[1].unmask = 1; @@ -682,29 +666,25 @@ static int au_ide_probe(struct device *dev) hwif->set_dma_mode = &auide_set_dma_mode; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->dma_off_quietly = &auide_dma_off_quietly; hwif->dma_timeout = &auide_dma_timeout; hwif->mdma_filter = &auide_mdma_filter; + hwif->dma_host_set = &auide_dma_host_set; hwif->dma_exec_cmd = &auide_dma_exec_cmd; hwif->dma_start = &auide_dma_start; hwif->ide_dma_end = &auide_dma_end; hwif->dma_setup = &auide_dma_setup; hwif->ide_dma_test_irq = &auide_dma_test_irq; - hwif->dma_host_off = &auide_dma_host_off; - hwif->dma_host_on = &auide_dma_host_on; hwif->dma_lost_irq = &auide_dma_lost_irq; - hwif->ide_dma_on = &auide_dma_on; -#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ +#endif hwif->channel = 0; - hwif->hold = 1; hwif->select_data = 0; /* no chipset-specific code */ hwif->config_data = 0; /* no chipset-specific code */ hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ hwif->drives[1].autotune = 1; -#endif + hwif->drives[0].no_io_32bit = 1; hwif->drives[1].no_io_32bit = 1; diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 521edd4..8b3959d 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -117,6 +117,7 @@ static int __devinit swarm_ide_probe(struct device *dev) default_hwif_mmiops(hwif); /* Prevent resource map manipulation. */ hwif->mmio = 1; + hwif->chipset = ide_generic; hwif->noprobe = 0; for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile index 95d1ea8..9480325 100644 --- a/drivers/ide/pci/Makefile +++ b/drivers/ide/pci/Makefile @@ -36,4 +36,8 @@ obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o # Must appear at the end of the block obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o +ifeq ($(CONFIG_BLK_DEV_CMD640), m) + obj-m += cmd640.o +endif + EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 5ae2656..4918719 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/atiixp.c Version 0.03 Aug 3 2007 + * linux/drivers/ide/pci/atiixp.c Version 0.05 Nov 9 2007 * * Copyright (C) 2003 ATI Inc. <hyu@xxxxxxx> * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz @@ -43,47 +43,8 @@ static atiixp_ide_timing mdma_timing[] = { { 0x02, 0x00 }, }; -static int save_mdma_mode[4]; - static DEFINE_SPINLOCK(atiixp_lock); -static void atiixp_dma_host_on(ide_drive_t *drive) -{ - struct pci_dev *dev = drive->hwif->pci_dev; - unsigned long flags; - u16 tmp16; - - spin_lock_irqsave(&atiixp_lock, flags); - - pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); - if (save_mdma_mode[drive->dn]) - tmp16 &= ~(1 << drive->dn); - else - tmp16 |= (1 << drive->dn); - pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); - - spin_unlock_irqrestore(&atiixp_lock, flags); - - ide_dma_host_on(drive); -} - -static void atiixp_dma_host_off(ide_drive_t *drive) -{ - struct pci_dev *dev = drive->hwif->pci_dev; - unsigned long flags; - u16 tmp16; - - spin_lock_irqsave(&atiixp_lock, flags); - - pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); - tmp16 &= ~(1 << drive->dn); - pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); - - spin_unlock_irqrestore(&atiixp_lock, flags); - - ide_dma_host_off(drive); -} - /** * atiixp_set_pio_mode - set host controller for PIO mode * @drive: drive @@ -132,26 +93,33 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; u32 tmp32; u16 tmp16; + u16 udma_ctl = 0; spin_lock_irqsave(&atiixp_lock, flags); - save_mdma_mode[drive->dn] = 0; + pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl); + if (speed >= XFER_UDMA_0) { pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16); tmp16 &= ~(0x07 << (drive->dn * 4)); tmp16 |= ((speed & 0x07) << (drive->dn * 4)); pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16); - } else { - if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) { - save_mdma_mode[drive->dn] = speed; - pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32); - tmp32 &= ~(0xff << timing_shift); - tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) | - (mdma_timing[speed & 0x03].command_width << (timing_shift + 4)); - pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32); - } + + udma_ctl |= (1 << drive->dn); + } else if (speed >= XFER_MW_DMA_0) { + u8 i = speed & 0x03; + + pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32); + tmp32 &= ~(0xff << timing_shift); + tmp32 |= (mdma_timing[i].recover_width << timing_shift) | + (mdma_timing[i].command_width << (timing_shift + 4)); + pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32); + + udma_ctl &= ~(1 << drive->dn); } + pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl); + spin_unlock_irqrestore(&atiixp_lock, flags); } @@ -181,9 +149,6 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->cbl = ATA_CBL_PATA80; else hwif->cbl = ATA_CBL_PATA40; - - hwif->dma_host_on = &atiixp_dma_host_on; - hwif->dma_host_off = &atiixp_dma_host_off; } static const struct ide_port_info atiixp_pci_info[] __devinitdata = { diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index 4aa4810..da3565e 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -706,9 +706,9 @@ static int pci_conf2(void) } /* - * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c + * Probe for a cmd640 chipset, and initialize it if found. */ -int __init ide_probe_for_cmd640x (void) +static int __init cmd640x_init(void) { #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED int second_port_toggled = 0; @@ -717,6 +717,7 @@ int __init ide_probe_for_cmd640x (void) const char *bus_type, *port2; unsigned int index; u8 b, cfr; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (cmd640_vlb && probe_for_cmd640_vlb()) { bus_type = "VLB"; @@ -769,6 +770,8 @@ int __init ide_probe_for_cmd640x (void) cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + idx[0] = cmd_hwif0->index; + /* * Ensure compatibility by always using the slowest timings * for access to the drive's command register block, @@ -826,6 +829,8 @@ int __init ide_probe_for_cmd640x (void) cmd_hwif1->pio_mask = ATA_PIO5; cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + + idx[1] = cmd_hwif1->index; } printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, cmd_hwif0->serialized ? "" : "not ", port2); @@ -872,6 +877,13 @@ int __init ide_probe_for_cmd640x (void) #ifdef CMD640_DUMP_REGS cmd640_dump_regs(); #endif + + ide_device_add(idx); + return 1; } +module_param_named(probe_vlb, cmd640_vlb, bool, 0); +MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset"); + +module_init(cmd640x_init); diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 0b1e947..cd4eb9d 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/cmd64x.c Version 1.52 Dec 24, 2007 + * linux/drivers/ide/pci/cmd64x.c Version 1.53 Dec 24, 2007 * * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. * Due to massive hardware bugs, UltraDMA is only supported @@ -22,8 +22,6 @@ #include <asm/io.h> -#define DISPLAY_CMD64X_TIMINGS - #define CMD_DEBUG 0 #if CMD_DEBUG @@ -37,11 +35,6 @@ */ #define CFR 0x50 #define CFR_INTR_CH0 0x04 -#define CNTRL 0x51 -#define CNTRL_ENA_1ST 0x04 -#define CNTRL_ENA_2ND 0x08 -#define CNTRL_DIS_RA0 0x40 -#define CNTRL_DIS_RA1 0x80 #define CMDTIM 0x52 #define ARTTIM0 0x53 @@ -60,108 +53,13 @@ #define MRDMODE 0x71 #define MRDMODE_INTR_CH0 0x04 #define MRDMODE_INTR_CH1 0x08 -#define MRDMODE_BLK_CH0 0x10 -#define MRDMODE_BLK_CH1 0x20 -#define BMIDESR0 0x72 #define UDIDETCR0 0x73 #define DTPR0 0x74 #define BMIDECR1 0x78 #define BMIDECSR 0x79 -#define BMIDESR1 0x7A #define UDIDETCR1 0x7B #define DTPR1 0x7C -#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) -#include <linux/stat.h> -#include <linux/proc_fs.h> - -static u8 cmd64x_proc = 0; - -#define CMD_MAX_DEVS 5 - -static struct pci_dev *cmd_devs[CMD_MAX_DEVS]; -static int n_cmd_devs; - -static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) -{ - char *p = buf; - u8 reg72 = 0, reg73 = 0; /* primary */ - u8 reg7a = 0, reg7b = 0; /* secondary */ - u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */ - - p += sprintf(p, "\nController: %d\n", index); - p += sprintf(p, "PCI-%x Chipset.\n", dev->device); - - (void) pci_read_config_byte(dev, CFR, ®50); - (void) pci_read_config_byte(dev, CNTRL, ®51); - (void) pci_read_config_byte(dev, ARTTIM23, ®57); - (void) pci_read_config_byte(dev, MRDMODE, ®71); - (void) pci_read_config_byte(dev, BMIDESR0, ®72); - (void) pci_read_config_byte(dev, UDIDETCR0, ®73); - (void) pci_read_config_byte(dev, BMIDESR1, ®7a); - (void) pci_read_config_byte(dev, UDIDETCR1, ®7b); - - /* PCI0643/6 originally didn't have the primary channel enable bit */ - if ((dev->device == PCI_DEVICE_ID_CMD_643) || - (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3)) - reg51 |= CNTRL_ENA_1ST; - - p += sprintf(p, "---------------- Primary Channel " - "---------------- Secondary Channel ------------\n"); - p += sprintf(p, " %s %s\n", - (reg51 & CNTRL_ENA_1ST) ? "enabled " : "disabled", - (reg51 & CNTRL_ENA_2ND) ? "enabled " : "disabled"); - p += sprintf(p, "---------------- drive0 --------- drive1 " - "-------- drive0 --------- drive1 ------\n"); - p += sprintf(p, "DMA enabled: %s %s" - " %s %s\n", - (reg72 & 0x20) ? "yes" : "no ", (reg72 & 0x40) ? "yes" : "no ", - (reg7a & 0x20) ? "yes" : "no ", (reg7a & 0x40) ? "yes" : "no "); - p += sprintf(p, "UltraDMA mode: %s (%c) %s (%c)", - ( reg73 & 0x01) ? " on" : "off", - ((reg73 & 0x30) == 0x30) ? ((reg73 & 0x04) ? '3' : '0') : - ((reg73 & 0x30) == 0x20) ? ((reg73 & 0x04) ? '3' : '1') : - ((reg73 & 0x30) == 0x10) ? ((reg73 & 0x04) ? '4' : '2') : - ((reg73 & 0x30) == 0x00) ? ((reg73 & 0x04) ? '5' : '2') : '?', - ( reg73 & 0x02) ? " on" : "off", - ((reg73 & 0xC0) == 0xC0) ? ((reg73 & 0x08) ? '3' : '0') : - ((reg73 & 0xC0) == 0x80) ? ((reg73 & 0x08) ? '3' : '1') : - ((reg73 & 0xC0) == 0x40) ? ((reg73 & 0x08) ? '4' : '2') : - ((reg73 & 0xC0) == 0x00) ? ((reg73 & 0x08) ? '5' : '2') : '?'); - p += sprintf(p, " %s (%c) %s (%c)\n", - ( reg7b & 0x01) ? " on" : "off", - ((reg7b & 0x30) == 0x30) ? ((reg7b & 0x04) ? '3' : '0') : - ((reg7b & 0x30) == 0x20) ? ((reg7b & 0x04) ? '3' : '1') : - ((reg7b & 0x30) == 0x10) ? ((reg7b & 0x04) ? '4' : '2') : - ((reg7b & 0x30) == 0x00) ? ((reg7b & 0x04) ? '5' : '2') : '?', - ( reg7b & 0x02) ? " on" : "off", - ((reg7b & 0xC0) == 0xC0) ? ((reg7b & 0x08) ? '3' : '0') : - ((reg7b & 0xC0) == 0x80) ? ((reg7b & 0x08) ? '3' : '1') : - ((reg7b & 0xC0) == 0x40) ? ((reg7b & 0x08) ? '4' : '2') : - ((reg7b & 0xC0) == 0x00) ? ((reg7b & 0x08) ? '5' : '2') : '?'); - p += sprintf(p, "Interrupt: %s, %s %s, %s\n", - (reg71 & MRDMODE_BLK_CH0 ) ? "blocked" : "enabled", - (reg50 & CFR_INTR_CH0 ) ? "pending" : "clear ", - (reg71 & MRDMODE_BLK_CH1 ) ? "blocked" : "enabled", - (reg57 & ARTTIM23_INTR_CH1) ? "pending" : "clear "); - - return (char *)p; -} - -static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count) -{ - char *p = buffer; - int i; - - for (i = 0; i < n_cmd_devs; i++) { - struct pci_dev *dev = cmd_devs[i]; - p = print_cmd64x_get_info(p, dev, i); - } - return p-buffer; /* => must be less than 4k! */ -} - -#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ - static u8 quantize_timing(int timing, int quant) { return (timing + quant - 1) / quant; @@ -472,16 +370,6 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha mrdmode &= ~0x30; (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02)); -#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) - - cmd_devs[n_cmd_devs++] = dev; - - if (!cmd64x_proc) { - cmd64x_proc = 1; - ide_pci_create_host_proc("cmd64x", cmd64x_get_info); - } -#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_IDE_PROC_FS */ - return 0; } diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index d1a91bc..6ec00b8 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -71,7 +71,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *pdev = hwif->pci_dev; int controller = drive->dn > 1 ? 1 : 0; - u8 reg; /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */ @@ -91,11 +90,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1), (cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].assert)); - - /* Set the DMA enable/disable flag */ - reg = inb(hwif->dma_base + 0x02 + 8*controller); - reg |= 1<<((drive->dn&1)+5); - outb(reg, hwif->dma_base + 0x02 + 8*controller); } static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) @@ -109,13 +103,14 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) * We wrap the DMA activate to set the vdma flag. This is needed * so that the IDE DMA layer issues PIO not DMA commands over the * DMA channel + * + * ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA */ - -static int cs5520_dma_on(ide_drive_t *drive) + +static void cs5520_dma_host_set(ide_drive_t *drive, int on) { - /* ATAPI is harder so leave it for now */ - drive->vdma = 1; - return 0; + drive->vdma = on; + ide_dma_host_set(drive, on); } static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) @@ -126,7 +121,7 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) if (hwif->dma_base == 0) return; - hwif->ide_dma_on = &cs5520_dma_on; + hwif->dma_host_set = &cs5520_dma_host_set; } #define DECLARE_CS_DEV(name_str) \ diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 1cd4e9c..3ec4c65 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/cy82c693.c Version 0.42 Oct 23, 2007 + * linux/drivers/ide/pci/cy82c693.c Version 0.44 Nov 8, 2007 * * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@xxxxxxxxxxxxx), Maintainer * Copyright (C) 1998-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>, Integrator @@ -176,17 +176,12 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) * set DMA mode a specific channel for CY82C693 */ -static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) +static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) { - u8 index = 0, data = 0; + ide_hwif_t *hwif = drive->hwif; + u8 single = (mode & 0x10) >> 4, index = 0, data = 0; - if (mode>2) /* make sure we set a valid mode */ - mode = 2; - - if (mode > drive->id->tDMA) /* to be absolutly sure we have a valid mode */ - mode = drive->id->tDMA; - - index = (HWIF(drive)->channel==0) ? CY82_INDEX_CHANNEL0 : CY82_INDEX_CHANNEL1; + index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; #if CY82C693_DEBUG_LOGS /* for debug let's show the previous values */ @@ -199,7 +194,7 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) (data&0x3), ((data>>2)&1)); #endif /* CY82C693_DEBUG_LOGS */ - data = (u8)mode|(u8)(single<<2); + data = (mode & 3) | (single << 2); outb(index, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); @@ -207,7 +202,7 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", drive->name, HWIF(drive)->channel, drive->select.b.unit, - mode, single); + mode & 3, single); #endif /* CY82C693_DEBUG_INFO */ /* @@ -230,39 +225,6 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) #endif /* CY82C693_DEBUG_INFO */ } -/* - * used to set DMA mode for CY82C693 (single and multi modes) - */ -static int cy82c693_ide_dma_on (ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; - -#if CY82C693_DEBUG_INFO - printk (KERN_INFO "dma_on: %s\n", drive->name); -#endif /* CY82C693_DEBUG_INFO */ - - if (id != NULL) { - /* Enable DMA on any drive that has DMA - * (multi or single) enabled - */ - if (id->field_valid & 2) { /* regular DMA */ - int mmode, smode; - - mmode = id->dma_mword & (id->dma_mword >> 8); - smode = id->dma_1word & (id->dma_1word >> 8); - - if (mmode != 0) { - /* enable multi */ - cy82c693_dma_enable(drive, (mmode >> 1), 0); - } else if (smode != 0) { - /* enable single */ - cy82c693_dma_enable(drive, (smode >> 1), 1); - } - } - } - return __ide_dma_on(drive); -} - static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); @@ -429,11 +391,7 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif) { hwif->set_pio_mode = &cy82c693_set_pio_mode; - - if (hwif->dma_base == 0) - return; - - hwif->ide_dma_on = &cy82c693_ide_dma_on; + hwif->set_dma_mode = &cy82c693_set_dma_mode; } static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) @@ -454,11 +412,11 @@ static const struct ide_port_info cy82c693_chipset __devinitdata = { .init_iops = init_iops_cy82c693, .init_hwif = init_hwif_cy82c693, .chipset = ide_cy82c693, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_TRUST_BIOS_FOR_DMA | + .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_CY82C693 | IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO4, - .swdma_mask = ATA_SWDMA2_ONLY, - .mwdma_mask = ATA_MWDMA2_ONLY, + .swdma_mask = ATA_SWDMA2, + .mwdma_mask = ATA_MWDMA2, }; static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 8382908..26aa492 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -80,7 +80,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) hw.irq = dev->irq; hw.chipset = ide_pci; /* this enables IRQ sharing */ - rc = ide_register_hw(&hw, &ide_undecoded_slave, 0, &hwif); + rc = ide_register_hw(&hw, &ide_undecoded_slave, &hwif); if (rc < 0) { printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc); pci_disable_device(dev); diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 3777fb8..1268593 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -725,15 +725,18 @@ static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) hpt3xx_set_mode(drive, XFER_PIO_0 + pio); } -static int hpt3xx_quirkproc(ide_drive_t *drive) +static void hpt3xx_quirkproc(ide_drive_t *drive) { struct hd_driveid *id = drive->id; const char **list = quirk_drives; while (*list) - if (strstr(id->model, *list++)) - return 1; - return 0; + if (strstr(id->model, *list++)) { + drive->quirk_list = 1; + return; + } + + drive->quirk_list = 0; } static void hpt3xx_maskproc(ide_drive_t *drive, int mask) diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 99b7d76..e610a53 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -431,33 +431,29 @@ static u8 __devinit ata66_it821x(ide_hwif_t *hwif) } /** - * it821x_fixup - post init callback - * @hwif: interface + * it821x_quirkproc - post init callback + * @drive: drive * - * This callback is run after the drives have been probed but + * This callback is run after the drive has been probed but * before anything gets attached. It allows drivers to do any * final tuning that is needed, or fixups to work around bugs. */ -static void __devinit it821x_fixups(ide_hwif_t *hwif) +static void __devinit it821x_quirkproc(ide_drive_t *drive) { - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int i; + struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif); + struct hd_driveid *id = drive->id; + u16 *idbits = (u16 *)drive->id; - if(!itdev->smart) { + if (!itdev->smart) { /* * If we are in pass through mode then not much * needs to be done, but we do bother to clear the * IRQ mask as we may well be in PIO (eg rev 0x10) * for now and we know unmasking is safe on this chipset. */ - for (i = 0; i < 2; i++) { - ide_drive_t *drive = &hwif->drives[i]; - if(drive->present) - drive->unmask = 1; - } - return; - } + drive->unmask = 1; + } else { /* * Perform fixups on smart mode. We need to "lose" some * capabilities the firmware lacks but does not filter, and @@ -465,16 +461,6 @@ static void __devinit it821x_fixups(ide_hwif_t *hwif) * in RAID mode. */ - for(i = 0; i < 2; i++) { - ide_drive_t *drive = &hwif->drives[i]; - struct hd_driveid *id; - u16 *idbits; - - if(!drive->present) - continue; - id = drive->id; - idbits = (u16 *)drive->id; - /* Check for RAID v native */ if(strstr(id->model, "Integrated Technology Express")) { /* In raid mode the ident block is slightly buggy @@ -537,6 +523,8 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL); u8 conf; + hwif->quirkproc = &it821x_quirkproc; + if (idev == NULL) { printk(KERN_ERR "it821x: out of memory, falling back to legacy behaviour.\n"); return; @@ -633,7 +621,6 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha .name = name_str, \ .init_chipset = init_chipset_it821x, \ .init_hwif = init_hwif_it821x, \ - .fixup = it821x_fixups, \ .host_flags = IDE_HFLAG_BOOTABLE, \ .pio_mask = ATA_PIO4, \ } diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index ef4a99b..89d2363 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -203,14 +203,17 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static int pdcnew_quirkproc(ide_drive_t *drive) +static void pdcnew_quirkproc(ide_drive_t *drive) { const char **list, *model = drive->id->model; for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(model, *list) != NULL) - return 2; - return 0; + if (strstr(model, *list) != NULL) { + drive->quirk_list = 2; + return; + } + + drive->quirk_list = 0; } static void pdcnew_reset(ide_drive_t *drive) diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 67b2781..3a1e081 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -176,14 +176,17 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); } -static int pdc202xx_quirkproc (ide_drive_t *drive) +static void pdc202xx_quirkproc(ide_drive_t *drive) { const char **list, *model = drive->id->model; for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(model, *list) != NULL) - return 2; - return 0; + if (strstr(model, *list) != NULL) { + drive->quirk_list = 2; + return; + } + + drive->quirk_list = 0; } static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index fef20bd..32fdf53 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -220,9 +220,9 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) } if (mode != -1) { printk("SC1200: %s: changing (U)DMA mode\n", drive->name); - hwif->dma_off_quietly(drive); - if (ide_set_dma_mode(drive, mode) == 0) - hwif->dma_host_on(drive); + ide_dma_off_quietly(drive); + if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma) + hwif->dma_host_set(drive, 1); return; } diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index e9bd269..877c09b 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -164,25 +164,12 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) ultra_timing &= ~(0x0F << (4*unit)); ultra_enable &= ~(0x01 << drive->dn); - switch(speed) { - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; - break; - - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - dma_timing |= dma_modes[2]; - ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit)); - ultra_enable |= (0x01 << drive->dn); - default: - break; - } + if (speed >= XFER_UDMA_0) { + dma_timing |= dma_modes[2]; + ultra_timing |= (udma_modes[speed - XFER_UDMA_0] << (4 * unit)); + ultra_enable |= (0x01 << drive->dn); + } else if (speed >= XFER_MW_DMA_0) + dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing); pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing); diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 7e9dade..9e0be7d 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -277,21 +277,6 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) return dma_stat; } -static int -sgiioc4_ide_dma_on(ide_drive_t * drive) -{ - drive->using_dma = 1; - - return 0; -} - -static void sgiioc4_dma_off_quietly(ide_drive_t *drive) -{ - drive->using_dma = 0; - - drive->hwif->dma_host_off(drive); -} - static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) { } @@ -303,13 +288,10 @@ sgiioc4_ide_dma_test_irq(ide_drive_t * drive) return sgiioc4_checkirq(HWIF(drive)); } -static void sgiioc4_dma_host_on(ide_drive_t * drive) -{ -} - -static void sgiioc4_dma_host_off(ide_drive_t * drive) +static void sgiioc4_dma_host_set(ide_drive_t *drive, int on) { - sgiioc4_clearirq(drive); + if (!on) + sgiioc4_clearirq(drive); } static void @@ -593,14 +575,11 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->mwdma_mask = ATA_MWDMA2_ONLY; + hwif->dma_host_set = &sgiioc4_dma_host_set; hwif->dma_setup = &sgiioc4_ide_dma_setup; hwif->dma_start = &sgiioc4_ide_dma_start; hwif->ide_dma_end = &sgiioc4_ide_dma_end; - hwif->ide_dma_on = &sgiioc4_ide_dma_on; - hwif->dma_off_quietly = &sgiioc4_dma_off_quietly; hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq; - hwif->dma_host_on = &sgiioc4_dma_host_on; - hwif->dma_host_off = &sgiioc4_dma_host_off; hwif->dma_lost_irq = &sgiioc4_dma_lost_irq; hwif->dma_timeout = &ide_dma_timeout; } @@ -614,6 +593,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) ide_hwif_t *hwif; int h; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw; /* * Find an empty HWIF; if none available, return -ENOMEM. @@ -653,21 +633,16 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) return -ENOMEM; } - if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) { - hw_regs_t hw; - - /* Initialize the IO registers */ - memset(&hw, 0, sizeof(hw)); - sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport); - memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); - hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; - } + /* Initialize the IO registers */ + memset(&hw, 0, sizeof(hw)); + sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport); + hw.irq = dev->irq; + hw.chipset = ide_pci; + hw.dev = &dev->dev; + ide_init_port_hw(hwif, &hw); - hwif->irq = dev->irq; - hwif->chipset = ide_pci; hwif->pci_dev = dev; hwif->channel = 0; /* Single Channel chip */ - hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */ /* The IOC4 uses MMIO rather than Port IO. */ default_hwif_mmiops(hwif); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 7b45eaf..908f37b 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -713,9 +713,6 @@ static int is_dev_seagate_sata(ide_drive_t *drive) const char *s = &drive->id->model[0]; unsigned len; - if (!drive->present) - return 0; - len = strnlen(s, sizeof(drive->id->model)); if ((len > 4) && (!memcmp(s, "ST", 2))) { @@ -730,18 +727,20 @@ static int is_dev_seagate_sata(ide_drive_t *drive) } /** - * siimage_fixup - post probe fixups - * @hwif: interface to fix up + * sil_quirkproc - post probe fixups + * @drive: drive * * Called after drive probe we use this to decide whether the * Seagate fixup must be applied. This used to be in init_iops but * that can occur before we know what drives are present. */ -static void __devinit siimage_fixup(ide_hwif_t *hwif) +static void __devinit sil_quirkproc(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; + /* Try and raise the rqsize */ - if (!is_sata(hwif) || !is_dev_seagate_sata(&hwif->drives[0])) + if (!is_sata(hwif) || !is_dev_seagate_sata(drive)) hwif->rqsize = 128; } @@ -804,6 +803,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) hwif->set_pio_mode = &sil_set_pio_mode; hwif->set_dma_mode = &sil_set_dma_mode; + hwif->quirkproc = &sil_quirkproc; if (sata) { static int first = 1; @@ -842,7 +842,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) .init_chipset = init_chipset_siimage, \ .init_iops = init_iops_siimage, \ .init_hwif = init_hwif_siimage, \ - .fixup = siimage_fixup, \ .host_flags = IDE_HFLAG_BOOTABLE, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 069f104..c7a125b 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -13,6 +13,7 @@ * -- Benjamin Herrenschmidt (01/11/03) benh@xxxxxxxxxxxxxxxxxxx * * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@xxxxxxxxxx> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz */ #include <linux/types.h> @@ -90,14 +91,8 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) drive->drive_data &= 0xffff0000; drive->drive_data |= drv_ctrl; - if (!drive->using_dma) { - /* - * If we are actually using MW DMA, then we can not - * reprogram the interface drive control register. - */ - pci_write_config_word(dev, reg, drv_ctrl); - pci_read_config_word (dev, reg, &drv_ctrl); - } + pci_write_config_word(dev, reg, drv_ctrl); + pci_read_config_word (dev, reg, &drv_ctrl); printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name, ide_xfer_verbose(pio + XFER_PIO_0), @@ -123,17 +118,6 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) */ drive->drive_data &= 0x0000ffff; drive->drive_data |= (unsigned long)drv_ctrl << 16; - - /* - * If we are already using DMA, we just reprogram - * the drive control register. - */ - if (drive->using_dma) { - struct pci_dev *dev = HWIF(drive)->pci_dev; - int reg = 0x44 + drive->dn * 4; - - pci_write_config_word(dev, reg, drv_ctrl); - } } /* @@ -201,6 +185,11 @@ static void sl82c105_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; + int reg = 0x44 + drive->dn * 4; + + DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name)); + + pci_write_config_word(dev, reg, drive->drive_data >> 16); sl82c105_reset_host(dev); ide_dma_start(drive); @@ -214,64 +203,24 @@ static void sl82c105_dma_timeout(ide_drive_t *drive) ide_dma_timeout(drive); } -static int sl82c105_ide_dma_on(ide_drive_t *drive) -{ - struct pci_dev *dev = HWIF(drive)->pci_dev; - int rc, reg = 0x44 + drive->dn * 4; - - DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name)); - - rc = __ide_dma_on(drive); - if (rc == 0) { - pci_write_config_word(dev, reg, drive->drive_data >> 16); - - printk(KERN_INFO "%s: DMA enabled\n", drive->name); - } - return rc; -} - -static void sl82c105_dma_off_quietly(ide_drive_t *drive) +static int sl82c105_dma_end(ide_drive_t *drive) { struct pci_dev *dev = HWIF(drive)->pci_dev; int reg = 0x44 + drive->dn * 4; + int ret; - DBG(("sl82c105_dma_off_quietly(drive:%s)\n", drive->name)); + DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name)); - pci_write_config_word(dev, reg, drive->drive_data); + ret = __ide_dma_end(drive); - ide_dma_off_quietly(drive); -} + pci_write_config_word(dev, reg, drive->drive_data); -/* - * Ok, that is nasty, but we must make sure the DMA timings - * won't be used for a PIO access. The solution here is - * to make sure the 16 bits mode is diabled on the channel - * when DMA is enabled, thus causing the chip to use PIO0 - * timings for those operations. - */ -static void sl82c105_selectproc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u32 val, old, mask; - - //DBG(("sl82c105_selectproc(drive:%s)\n", drive->name)); - - mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16; - old = val = (u32)pci_get_drvdata(dev); - if (drive->using_dma) - val &= ~mask; - else - val |= mask; - if (old != val) { - pci_write_config_dword(dev, 0x40, val); - pci_set_drvdata(dev, (void *)val); - } + return ret; } /* * ATA reset will clear the 16 bits mode in the control - * register, we need to update our cache + * register, we need to reprogram it */ static void sl82c105_resetproc(ide_drive_t *drive) { @@ -281,7 +230,8 @@ static void sl82c105_resetproc(ide_drive_t *drive) DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); pci_read_config_dword(dev, 0x40, &val); - pci_set_drvdata(dev, (void *)val); + val |= (CTRL_P1F16 | CTRL_P0F16); + pci_write_config_dword(dev, 0x40, val); } /* @@ -334,7 +284,6 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - pci_set_drvdata(dev, (void *)val); return dev->irq; } @@ -350,7 +299,6 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) hwif->set_pio_mode = &sl82c105_set_pio_mode; hwif->set_dma_mode = &sl82c105_set_dma_mode; - hwif->selectproc = &sl82c105_selectproc; hwif->resetproc = &sl82c105_resetproc; if (!hwif->dma_base) @@ -369,10 +317,9 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) hwif->mwdma_mask = ATA_MWDMA2; - hwif->ide_dma_on = &sl82c105_ide_dma_on; - hwif->dma_off_quietly = &sl82c105_dma_off_quietly; hwif->dma_lost_irq = &sl82c105_dma_lost_irq; hwif->dma_start = &sl82c105_dma_start; + hwif->ide_dma_end = &sl82c105_dma_end; hwif->dma_timeout = &sl82c105_dma_timeout; if (hwif->mate) diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 0151d7f..04cd893 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -241,11 +241,7 @@ static int trm290_ide_dma_test_irq (ide_drive_t *drive) return (status == 0x00ff); } -static void trm290_dma_host_on(ide_drive_t *drive) -{ -} - -static void trm290_dma_host_off(ide_drive_t *drive) +static void trm290_dma_host_set(ide_drive_t *drive, int on) { } @@ -289,8 +285,7 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3); - hwif->dma_host_off = &trm290_dma_host_off; - hwif->dma_host_on = &trm290_dma_host_on; + hwif->dma_host_set = &trm290_dma_host_set; hwif->dma_setup = &trm290_dma_setup; hwif->dma_exec_cmd = &trm290_dma_exec_cmd; hwif->dma_start = &trm290_dma_start; diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile new file mode 100644 index 0000000..65af584 --- /dev/null +++ b/drivers/ide/ppc/Makefile @@ -0,0 +1,3 @@ + +obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o +obj-$(CONFIG_BLK_DEV_MPC8xx_IDE) += mpc8xx.o diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 5f0da35..3fd5d45 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -838,3 +838,21 @@ void m8xx_ide_init(void) ppc_ide_md.default_io_base = m8xx_ide_default_io_base; ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports; } + +static int __init mpc8xx_ide_probe(void) +{ + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + +#ifdef IDE0_BASE_OFFSET + idx[0] = 0; +#ifdef IDE1_BASE_OFFSET + idx[1] = 1; +#endif +#endif + + ide_device_add(idx); + + return 0; +} + +module_init(mpc8xx_ide_probe); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 3dce800..736d12c 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1012,12 +1012,11 @@ pmac_ide_do_resume(ide_hwif_t *hwif) * rare machines unfortunately, but it's better this way. */ static int -pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) +pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) { struct device_node *np = pmif->node; const int *bidp; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - hw_regs_t hw; pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; @@ -1103,11 +1102,9 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) /* Tell common code _not_ to mess with resources */ hwif->mmio = 1; hwif->hwif_data = pmif; - memset(&hw, 0, sizeof(hw)); - pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, &hwif->irq); - memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); - hwif->chipset = ide_pmac; - hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET] || pmif->mediabay; + hw->chipset = ide_pmac; + ide_init_port_hw(hwif, hw); + hwif->noprobe = pmif->mediabay; hwif->hold = pmif->mediabay; hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; hwif->drives[0].unmask = 1; @@ -1136,8 +1133,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->noprobe = 0; #endif /* CONFIG_PMAC_MEDIABAY */ - hwif->sg_max_nents = MAX_DCMDS; - #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC /* has a DBDMA controller channel */ if (pmif->dma_regs) @@ -1163,6 +1158,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) ide_hwif_t *hwif; pmac_ide_hwif_t *pmif; int i, rc; + hw_regs_t hw; i = 0; while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0 @@ -1205,7 +1201,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) regbase = (unsigned long) base; hwif->pci_dev = mdev->bus->pdev; - hwif->gendev.parent = &mdev->ofdev.dev; pmif->mdev = mdev; pmif->node = mdev->ofdev.node; @@ -1223,7 +1218,12 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ dev_set_drvdata(&mdev->ofdev.dev, hwif); - rc = pmac_ide_setup_device(pmif, hwif); + memset(&hw, 0, sizeof(hw)); + pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL); + hw.irq = irq; + hw.dev = &mdev->ofdev.dev; + + rc = pmac_ide_setup_device(pmif, hwif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ dev_set_drvdata(&mdev->ofdev.dev, NULL); @@ -1282,6 +1282,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) void __iomem *base; unsigned long rbase, rlen; int i, rc; + hw_regs_t hw; np = pci_device_to_OF_node(pdev); if (np == NULL) { @@ -1315,7 +1316,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) } hwif->pci_dev = pdev; - hwif->gendev.parent = &pdev->dev; pmif->mdev = NULL; pmif->node = np; @@ -1332,7 +1332,12 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, hwif); - rc = pmac_ide_setup_device(pmif, hwif); + memset(&hw, 0, sizeof(hw)); + pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL); + hw.irq = pdev->irq; + hw.dev = &pdev->dev; + + rc = pmac_ide_setup_device(pmif, hwif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ pci_set_drvdata(pdev, NULL); @@ -1698,11 +1703,7 @@ pmac_ide_dma_test_irq (ide_drive_t *drive) return 1; } -static void pmac_ide_dma_host_off(ide_drive_t *drive) -{ -} - -static void pmac_ide_dma_host_on(ide_drive_t *drive) +static void pmac_ide_dma_host_set(ide_drive_t *drive, int on) { } @@ -1748,15 +1749,14 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) return; } - hwif->dma_off_quietly = &ide_dma_off_quietly; - hwif->ide_dma_on = &__ide_dma_on; + hwif->sg_max_nents = MAX_DCMDS; + + hwif->dma_host_set = &pmac_ide_dma_host_set; hwif->dma_setup = &pmac_ide_dma_setup; hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd; hwif->dma_start = &pmac_ide_dma_start; hwif->ide_dma_end = &pmac_ide_dma_end; hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq; - hwif->dma_host_off = &pmac_ide_dma_host_off; - hwif->dma_host_on = &pmac_ide_dma_host_on; hwif->dma_timeout = &ide_dma_timeout; hwif->dma_lost_irq = &pmac_ide_dma_lost_irq; @@ -1786,3 +1786,5 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) } #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + +module_init(pmac_ide_probe); diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index d2cd5a3..676c66e 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -165,13 +165,17 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_ dma_base = pci_resource_start(dev, baridx); - if (dma_base == 0) + if (dma_base == 0) { printk(KERN_ERR "%s: DMA base is invalid\n", d->name); + return 0; + } } - if ((d->host_flags & IDE_HFLAG_CS5520) == 0 && dma_base) { + if (hwif->channel) + dma_base += 8; + + if ((d->host_flags & IDE_HFLAG_CS5520) == 0) { u8 simplex_stat = 0; - dma_base += hwif->channel ? 8 : 0; switch(dev->device) { case PCI_DEVICE_ID_AL_M5219: @@ -359,6 +363,8 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port unsigned long ctl = 0, base = 0; ide_hwif_t *hwif; u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0; + u8 oldnoprobe = 0; + struct hw_regs_s hw; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { /* Possibly we should fail if these checks report true */ @@ -381,26 +387,25 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port } if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL) return NULL; /* no room in ide_hwifs[] */ - if (hwif->io_ports[IDE_DATA_OFFSET] != base || - hwif->io_ports[IDE_CONTROL_OFFSET] != (ctl | 2)) { - hw_regs_t hw; - - memset(&hw, 0, sizeof(hw)); -#ifndef CONFIG_IDE_ARCH_OBSOLETE_INIT - ide_std_init_ports(&hw, base, ctl | 2); -#else - ide_init_hwif_ports(&hw, base, ctl | 2, NULL); -#endif - memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); - hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; - } - hwif->chipset = d->chipset ? d->chipset : ide_pci; + + memset(&hw, 0, sizeof(hw)); + hw.irq = hwif->irq ? hwif->irq : irq; + hw.dev = &dev->dev; + hw.chipset = d->chipset ? d->chipset : ide_pci; + ide_std_init_ports(&hw, base, ctl | 2); + + if (hwif->io_ports[IDE_DATA_OFFSET] == base && + hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2)) + oldnoprobe = hwif->noprobe; + + ide_init_port_hw(hwif, &hw); + + hwif->noprobe = oldnoprobe; + hwif->pci_dev = dev; hwif->cds = d; hwif->channel = port; - if (!hwif->irq) - hwif->irq = irq; if (mate) { hwif->mate = mate; mate->mate = hwif; @@ -535,12 +540,8 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL) continue; - /* setup proper ancestral information */ - hwif->gendev.parent = &dev->dev; - *(idx + port) = hwif->index; - if (d->init_iops) d->init_iops(hwif); @@ -551,8 +552,6 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) hwif->irq = port ? 15 : 14; - hwif->fixup = d->fixup; - hwif->host_flags = d->host_flags; hwif->pio_mask = d->pio_mask; @@ -699,105 +698,3 @@ out: } EXPORT_SYMBOL_GPL(ide_setup_pci_devices); - -#ifdef CONFIG_IDEPCI_PCIBUS_ORDER -/* - * Module interfaces - */ - -static int pre_init = 1; /* Before first ordered IDE scan */ -static LIST_HEAD(ide_pci_drivers); - -/* - * __ide_pci_register_driver - attach IDE driver - * @driver: pci driver - * @module: owner module of the driver - * - * Registers a driver with the IDE layer. The IDE layer arranges that - * boot time setup is done in the expected device order and then - * hands the controllers off to the core PCI code to do the rest of - * the work. - * - * Returns are the same as for pci_register_driver - */ - -int __ide_pci_register_driver(struct pci_driver *driver, struct module *module, - const char *mod_name) -{ - if (!pre_init) - return __pci_register_driver(driver, module, mod_name); - driver->driver.owner = module; - list_add_tail(&driver->node, &ide_pci_drivers); - return 0; -} -EXPORT_SYMBOL_GPL(__ide_pci_register_driver); - -/** - * ide_scan_pcidev - find an IDE driver for a device - * @dev: PCI device to check - * - * Look for an IDE driver to handle the device we are considering. - * This is only used during boot up to get the ordering correct. After - * boot up the pci layer takes over the job. - */ - -static int __init ide_scan_pcidev(struct pci_dev *dev) -{ - struct list_head *l; - struct pci_driver *d; - - list_for_each(l, &ide_pci_drivers) { - d = list_entry(l, struct pci_driver, node); - if (d->id_table) { - const struct pci_device_id *id = - pci_match_id(d->id_table, dev); - - if (id != NULL && d->probe(dev, id) >= 0) { - dev->driver = d; - pci_dev_get(dev); - return 1; - } - } - } - return 0; -} - -/** - * ide_scan_pcibus - perform the initial IDE driver scan - * @scan_direction: set for reverse order scanning - * - * Perform the initial bus rather than driver ordered scan of the - * PCI drivers. After this all IDE pci handling becomes standard - * module ordering not traditionally ordered. - */ - -void __init ide_scan_pcibus (int scan_direction) -{ - struct pci_dev *dev = NULL; - struct pci_driver *d; - struct list_head *l, *n; - - pre_init = 0; - if (!scan_direction) - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) - ide_scan_pcidev(dev); - else - while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, - dev))) - ide_scan_pcidev(dev); - - /* - * Hand the drivers over to the PCI layer now we - * are post init. - */ - - list_for_each_safe(l, n, &ide_pci_drivers) { - list_del(l); - d = list_entry(l, struct pci_driver, node); - if (__pci_register_driver(d, d->driver.owner, - d->driver.mod_name)) - printk(KERN_ERR "%s: failed to register %s driver\n", - __FUNCTION__, d->driver.mod_name); - } -} -#endif diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 48d647a..eaba4a9 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -563,7 +563,8 @@ static void media_bay_step(int i) ide_init_hwif_ports(&hw, (unsigned long) bay->cd_base, (unsigned long) 0, NULL); hw.irq = bay->cd_irq; hw.chipset = ide_pmac; - bay->cd_index = ide_register_hw(&hw, NULL, 0, NULL); + bay->cd_index = + ide_register_hw(&hw, NULL, NULL); pmu_resume(); } if (bay->cd_index == -1) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index bd20a4e..49b7a4c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -143,7 +143,6 @@ enum rq_cmd_type_bits { * use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver * private REQ_LB opcodes to differentiate what type of request this is */ - REQ_TYPE_ATA_CMD, REQ_TYPE_ATA_TASKFILE, REQ_TYPE_ATA_PC, }; diff --git a/include/linux/ide.h b/include/linux/ide.h index 1e44099..27cb39d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -107,7 +107,6 @@ typedef unsigned char byte; /* used everywhere */ #define BAD_W_STAT (BAD_R_STAT | WRERR_STAT) #define BAD_STAT (BAD_R_STAT | DRQ_STAT) #define DRIVE_READY (READY_STAT | SEEK_STAT) -#define DATA_READY (DRQ_STAT) #define BAD_CRC (ABRT_ERR | ICRC_ERR) @@ -198,8 +197,11 @@ typedef struct hw_regs_s { } hw_regs_t; struct hwif_s * ide_find_port(unsigned long); +void ide_init_port_data(struct hwif_s *, unsigned int); +void ide_init_port_hw(struct hwif_s *, hw_regs_t *); -int ide_register_hw(hw_regs_t *, void (*)(struct hwif_s *), int, +struct ide_drive_s; +int ide_register_hw(hw_regs_t *, void (*)(struct ide_drive_s *), struct hwif_s **); void ide_setup_ports( hw_regs_t *hw, @@ -391,7 +393,6 @@ typedef struct ide_drive_s { u8 state; /* retry state */ u8 waiting_for_dma; /* dma currently in progress */ u8 unmask; /* okay to unmask other irqs */ - u8 bswap; /* byte swap data */ u8 noflush; /* don't attempt flushes */ u8 dsc_overlap; /* DSC overlap */ u8 nice1; /* give potential excess bandwidth */ @@ -527,31 +528,26 @@ typedef struct hwif_s { /* special host masking for drive selection */ void (*maskproc)(ide_drive_t *, int); /* check host's drive quirk list */ - int (*quirkproc)(ide_drive_t *); + void (*quirkproc)(ide_drive_t *); /* driver soft-power interface */ int (*busproc)(ide_drive_t *, int); #endif u8 (*mdma_filter)(ide_drive_t *); u8 (*udma_filter)(ide_drive_t *); - void (*fixup)(struct hwif_s *); - void (*ata_input_data)(ide_drive_t *, void *, u32); void (*ata_output_data)(ide_drive_t *, void *, u32); void (*atapi_input_bytes)(ide_drive_t *, void *, u32); void (*atapi_output_bytes)(ide_drive_t *, void *, u32); + void (*dma_host_set)(ide_drive_t *, int); int (*dma_setup)(ide_drive_t *); void (*dma_exec_cmd)(ide_drive_t *, u8); void (*dma_start)(ide_drive_t *); int (*ide_dma_end)(ide_drive_t *drive); - int (*ide_dma_on)(ide_drive_t *drive); - void (*dma_off_quietly)(ide_drive_t *drive); int (*ide_dma_test_irq)(ide_drive_t *drive); void (*ide_dma_clear_irq)(ide_drive_t *drive); - void (*dma_host_on)(ide_drive_t *drive); - void (*dma_host_off)(ide_drive_t *drive); void (*dma_lost_irq)(ide_drive_t *drive); void (*dma_timeout)(ide_drive_t *drive); @@ -874,14 +870,6 @@ extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t); extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); -/* - * Issue ATA command and wait for completion. - * Use for implementing commands in kernel - * - * (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf) - */ -extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *); - enum { IDE_TFLAG_LBA48 = (1 << 0), IDE_TFLAG_NO_SELECT_MASK = (1 << 1), @@ -934,6 +922,14 @@ enum { IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | IDE_TFLAG_IN_LBA, IDE_TFLAG_IN_DEVICE = (1 << 29), + IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB | + IDE_TFLAG_IN_HOB, + IDE_TFLAG_TF = IDE_TFLAG_OUT_TF | + IDE_TFLAG_IN_TF, + IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE | + IDE_TFLAG_IN_DEVICE, + /* force 16-bit I/O operations */ + IDE_TFLAG_IO_16BIT = (1 << 30), }; struct ide_taskfile { @@ -988,6 +984,10 @@ void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); +void task_end_request(ide_drive_t *, struct request *, u8); + +u8 wait_drive_not_busy(ide_drive_t *); + int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16); int ide_no_data_taskfile(ide_drive_t *, ide_task_t *); @@ -1015,10 +1015,9 @@ extern void do_ide_request(struct request_queue *); void ide_init_disk(struct gendisk *, ide_drive_t *); -extern int ideprobe_init(void); - #ifdef CONFIG_IDEPCI_PCIBUS_ORDER -extern void ide_scan_pcibus(int scan_direction) __init; +extern int ide_scan_direction; +int __init ide_scan_pcibus(void); extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name); #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME) #else @@ -1095,6 +1094,8 @@ enum { /* unmask IRQs */ IDE_HFLAG_UNMASK_IRQS = (1 << 25), IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26), + /* host is CY82C693 */ + IDE_HFLAG_CY82C693 = (1 << 27), }; #ifdef CONFIG_BLK_DEV_OFFBOARD @@ -1109,7 +1110,6 @@ struct ide_port_info { void (*init_iops)(ide_hwif_t *); void (*init_hwif)(ide_hwif_t *); void (*init_dma)(ide_hwif_t *, unsigned long); - void (*fixup)(ide_hwif_t *); ide_pci_enablebit_t enablebits[2]; hwif_chipset_t chipset; u8 extra; @@ -1147,7 +1147,9 @@ static inline u8 ide_max_dma_mode(ide_drive_t *drive) return ide_find_dma_mode(drive, XFER_UDMA_6); } +void ide_dma_off_quietly(ide_drive_t *); void ide_dma_off(ide_drive_t *); +void ide_dma_on(ide_drive_t *); int ide_set_dma(ide_drive_t *); ide_startstop_t ide_dma_intr(ide_drive_t *); @@ -1158,10 +1160,7 @@ extern void ide_destroy_dmatable(ide_drive_t *); extern int ide_release_dma(ide_hwif_t *); extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int); -void ide_dma_host_off(ide_drive_t *); -void ide_dma_off_quietly(ide_drive_t *); -void ide_dma_host_on(ide_drive_t *); -extern int __ide_dma_on(ide_drive_t *); +void ide_dma_host_set(ide_drive_t *, int); extern int ide_dma_setup(ide_drive_t *); extern void ide_dma_start(ide_drive_t *); extern int __ide_dma_end(ide_drive_t *); @@ -1173,7 +1172,9 @@ extern void ide_dma_timeout(ide_drive_t *); static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; } static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } +static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; } static inline void ide_dma_off(ide_drive_t *drive) { ; } +static inline void ide_dma_on(ide_drive_t *drive) { ; } static inline void ide_dma_verbose(ide_drive_t *drive) { ; } static inline int ide_set_dma(ide_drive_t *drive) { return 1; } #endif /* CONFIG_BLK_DEV_IDEDMA */ @@ -1203,8 +1204,9 @@ extern void ide_unregister (unsigned int index); void ide_register_region(struct gendisk *); void ide_unregister_region(struct gendisk *); -void ide_undecoded_slave(ide_hwif_t *); +void ide_undecoded_slave(ide_drive_t *); +int ide_device_add_all(u8 *idx); int ide_device_add(u8 idx[4]); static inline void *ide_get_hwifdata (ide_hwif_t * hwif) @@ -1302,4 +1304,9 @@ static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive) return &hwif->drives[(drive->dn ^ 1) & 1]; } +static inline void ide_set_irq(ide_drive_t *drive, int on) +{ + drive->hwif->OUTB(drive->ctl | (on ? 0 : 2), IDE_CONTROL_REG); +} + #endif /* _IDE_H */ - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html