Re: SATA port multiplier(Sil 3132) and JMicron 361-363

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



mikp wrote:
>>> The JMB361 controller is more quirky. I had to reboot and replug 3 or 4
>>> times before the PMP box started working normal. Here is syslog and dmesg of boot 
>>> and reboot to finally get JMB361 working:
>> The log messages are truncated.  Can you please post a clean kernel log
>> including booting, detection of ata5 and detection failure?  Also,
>> please give a shot at different shorter cable.
>>
> I tested this morning with different cables (long and short) and the JMB361 
> worked successfully with the PMP every time. So it appears the previous 
> problem was related to the cable. Although the same cable did work with the 
> SI 3132.

I've seen that sometimes.  I don't know whether PMP devices are picky
about cable or e-SATA cables are crappy tho.

Thanks.

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux