Re: libata pm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Sa, 26.01.2008, 23:33, schrieb Tejun Heo:
> dusty@xxxxxx wrote:
>> I could solve the problem by ncq blacklisting the "Maxtor 6V300F0"
>> devices in libata-core.c
>
> That's a strange story.  The reported error was PHY readiness changed
> and Device exchanged, both of which point to hotplug event.  Maybe
> something causes the firmware to reset?  What happen if you only leave two
> drives on the port multiplier and remove the NCQ blacklist?  Also, does
> the error ever occur on the drives which are connected directly to the
> controller?
>
>
> --
> tejun
>
>

No the error only occures on the drives on the pm. I can test the pm with
two Maxtor drives tomorrow (currently backing up the raid).



-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux