Can you post the result of 'dmesg'
Attached as dmesg.log
'cat /proc/mounts' and
Attached as proc.mounts.txt
'fuser -v /dev/sdX#'?
root@san001:~# fuser -v /dev/sda1 root@san001:~# fuser -v /dev/sdb1 root@san001:~# fuser -v /dev/sdc1 root@san001:~# fuser -v /dev/sdd1 root@san001:~# fuser -v /dev/sde1 root@san001:~# fuser -v /dev/sde root@san001:~# fuser -v /dev/sdd root@san001:~# fuser -v /dev/sdc root@san001:~# fuser -v /dev/sdb root@san001:~# fuser -v /dev/sda root@san001:~# fuser -v /dev/sd* root@san001:~# And for good measure... root@san001:~# lsof /dev/sd* root@san001:~# Thank you -- Eric Windisch GrokThis.net
rootfs / rootfs rw 0 0 none /sys sysfs rw 0 0 none /proc proc rw 0 0 udev /dev tmpfs rw 0 0 /dev/mapper/SysDisk-Root / ext3 rw,data=ordered 0 0 /dev/mapper/SysDisk-Root /dev/.static/dev ext3 rw,data=ordered 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 devpts /dev/pts devpts rw 0 0 tmpfs /dev/shm tmpfs rw 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 /dev/hda1 /boot ext3 rw,data=ordered 0 0 /dev/mapper/SysDisk-Tmp /tmp ext3 rw,data=ordered 0 0
[4294667.296000] Linux version 2.6.17.7 (root@san001) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 Thu Aug 3 00:02:56 EDT 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000000fffe000 (usable) [4294667.296000] BIOS-e820: 000000000fffe000 - 0000000010000000 (reserved) [4294667.296000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [4294667.296000] 255MB LOWMEM available. [4294667.296000] On node 0 totalpages: 65534 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] Normal zone: 61438 pages, LIFO batch:15 [4294667.296000] DMI 2.2 present. [4294667.296000] ACPI: RSDP (v000 DELL ) @ 0x000fdf50 [4294667.296000] ACPI: RSDT (v001 DELL G1 0x00000002 ASL 0x00000061) @ 0x000fdf64 [4294667.296000] ACPI: FADT (v001 DELL G1 0x00000002 ASL 0x00000061) @ 0x000fdf8c [4294667.296000] ACPI: DSDT (v001 OEMx dt_ex 0x00001000 MSFT 0x01000005) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x808 [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 10000000:efe00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/mapper/SysDisk-Root ro [4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic" [4294667.296000] mapped APIC to ffffd000 (01201000) [4294667.296000] Enabling fast FPU save and restore... done. [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 1024 (order: 10, 4096 bytes) [4294667.296000] Detected 399.062 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294669.397000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [4294669.398000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [4294669.429000] Memory: 248364k/262136k available (2825k kernel code, 13168k reserved, 893k data, 208k init, 0k highmem) [4294669.430000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294669.490000] Calibrating delay using timer specific routine.. 798.53 BogoMIPS (lpj=399265) [4294669.490000] Security Framework v1.0.0 initialized [4294669.490000] SELinux: Disabled at boot. [4294669.490000] Capability LSM initialized [4294669.490000] Mount-cache hash table entries: 512 [4294669.490000] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [4294669.490000] CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [4294669.490000] CPU: L1 I cache: 16K, L1 D cache: 16K [4294669.491000] CPU: L2 cache: 512K [4294669.491000] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [4294669.491000] CPU: Intel Pentium II (Deschutes) stepping 02 [4294669.491000] Checking 'hlt' instruction... OK. [4294669.495000] SMP alternatives: switching to UP code [4294669.495000] Freeing SMP alternatives: 0k freed [4294669.518000] ACPI: setting ELCR to 0200 (from 1c00) [4294669.519000] checking if image is initramfs... it is [4294672.196000] Freeing initrd memory: 6595k freed [4294672.197000] NET: Registered protocol family 16 [4294672.197000] ACPI: bus type pci registered [4294672.213000] PCI: PCI BIOS revision 2.10 entry at 0xfca8e, last bus=1 [4294672.213000] Setting up standard PCI resources [4294672.214000] ACPI: Subsystem revision 20060127 [4294672.231000] ACPI: Interpreter enabled [4294672.231000] ACPI: Using PIC for interrupt routing [4294672.233000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294672.233000] PCI: Probing PCI hardware (bus 00) [4294672.233000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294672.239000] PCI quirk: region 0800-083f claimed by PIIX4 ACPI [4294672.239000] PCI quirk: region 0850-085f claimed by PIIX4 SMB [4294672.240000] Boot video device is 0000:01:00.0 [4294672.240000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294672.261000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [4294672.263000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [4294672.265000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15) [4294672.267000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 15) [4294672.268000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294672.268000] pnp: PnP ACPI init [4294672.290000] pnp: PnP ACPI: found 13 devices [4294672.291000] SCSI subsystem initialized [4294672.291000] usbcore: registered new driver usbfs [4294672.292000] usbcore: registered new driver hub [4294672.292000] PCI: Using ACPI for IRQ routing [4294672.292000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294672.303000] pnp: 00:0c: ioport range 0x800-0x85f could not be reserved [4294672.305000] PCI: Bridge: 0000:00:01.0 [4294672.305000] IO window: e000-efff [4294672.305000] MEM window: fc000000-feffffff [4294672.305000] PREFETCH window: f9000000-f9ffffff [4294672.305000] NET: Registered protocol family 2 [4294672.315000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [4294672.315000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [4294672.315000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [4294672.315000] TCP: Hash tables configured (established 8192 bind 4096) [4294672.316000] TCP reno registered [4294672.316000] * Found PM-Timer Bug on this chipset. Due to workarounds for a bug, [4294672.316000] * this time source is slow. Consider trying other time sources (clock=) [4294672.317000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [4294672.317000] apm: overridden by ACPI. [4294672.321000] audit: initializing netlink socket (disabled) [4294672.321000] audit(1155664446.320:1): initialized [4294672.322000] VFS: Disk quotas dquot_6.5.1 [4294672.322000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294672.322000] Initializing Cryptographic API [4294672.322000] io scheduler noop registered [4294672.322000] io scheduler anticipatory registered [4294672.322000] io scheduler deadline registered [4294672.323000] io scheduler cfq registered (default) [4294672.323000] Limiting direct PCI/PCI transfers. [4294672.323000] ACPI: Power Button (FF) [PWRF] [4294672.334000] Generic RTC Driver v1.07 [4294672.335000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [4294672.335000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294672.335000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294672.337000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294672.338000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294672.341000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294672.342000] loop: loaded (max 8 devices) [4294672.344000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 [4294672.344000] PCI: setting IRQ 12 as level-triggered [4294672.344000] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [4294672.344000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html [4294672.344000] 0000:00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at d0802000. [4294672.367000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294672.367000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294672.367000] PIIX4: IDE controller at PCI slot 0000:00:07.1 [4294672.367000] PIIX4: chipset revision 1 [4294672.367000] PIIX4: not 100% native mode: will probe irqs later [4294672.367000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [4294672.367000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio [4294672.368000] Probing IDE interface ide0... [4294672.632000] hda: WDC WD400BB-00AUA1, ATA DISK drive [4294673.245000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.245000] Probing IDE interface ide1... [4294673.917000] hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive [4294674.223000] ide1 at 0x170-0x177,0x376 on irq 15 [4294674.224000] hda: max request size: 128KiB [4294674.242000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) [4294674.242000] hda: cache flushes not supported [4294674.242000] hda: hda1 hda2 [4294674.253000] iscsi: registered transport (tcp) [4294674.253000] libata version 2.00 loaded. [4294674.253000] sata_sil24 0000:00:0e.0: version 0.3 [4294674.255000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [4294674.255000] PCI: setting IRQ 10 as level-triggered [4294674.255000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294674.256000] ata1: SATA max UDMA/100 cmd 0xD0820000 ctl 0x0 bmdma 0x0 irq 10 [4294674.256000] ata2: SATA max UDMA/100 cmd 0xD0822000 ctl 0x0 bmdma 0x0 irq 10 [4294674.257000] ata3: SATA max UDMA/100 cmd 0xD0824000 ctl 0x0 bmdma 0x0 irq 10 [4294674.258000] ata4: SATA max UDMA/100 cmd 0xD0826000 ctl 0x0 bmdma 0x0 irq 10 [4294674.258000] scsi0 : sata_sil24 [4294674.583000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [4294674.682000] ata1.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 5 ports, feat 0x9/0x9 [4294674.759000] ata1.00: hard resetting port [4294675.262000] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [4294675.273000] ata1.01: hard resetting port [4294675.721000] ata1.01: SATA link down (SStatus 0 SControl 300) [4294675.732000] ata1.02: hard resetting port [4294676.191000] ata1.02: SATA link down (SStatus 0 SControl 300) [4294676.202000] ata1.03: hard resetting port [4294676.650000] ata1.03: SATA link down (SStatus 0 SControl 300) [4294676.661000] ata1.04: hard resetting port [4294677.120000] ata1.04: SATA link down (SStatus 0 SControl 300) [4294677.120000] ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) [4294677.120000] ata1.00: ata1: dev 0 multi count 16 [4294677.122000] ata1.00: configured for UDMA/100 [4294677.133000] ata1: EH complete [4294677.133000] scsi1 : sata_sil24 [4294677.458000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [4294677.557000] ata2.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 5 ports, feat 0x9/0x9 [4294677.634000] ata2.00: hard resetting port [4294678.126000] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [4294678.137000] ata2.01: hard resetting port [4294678.585000] ata2.01: SATA link down (SStatus 0 SControl 300) [4294678.596000] ata2.02: hard resetting port [4294679.099000] ata2.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [4294679.110000] ata2.03: hard resetting port [4294679.558000] ata2.03: SATA link down (SStatus 0 SControl 300) [4294679.569000] ata2.04: hard resetting port [4294680.028000] ata2.04: SATA link down (SStatus 0 SControl 300) [4294680.028000] ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) [4294680.028000] ata2.00: ata2: dev 0 multi count 16 [4294680.030000] ata2.00: configured for UDMA/100 [4294680.030000] ata2.02: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) [4294680.030000] ata2.02: ata2: dev 0 multi count 16 [4294680.032000] ata2.02: configured for UDMA/100 [4294680.043000] ata2: EH complete [4294680.043000] scsi2 : sata_sil24 [4294680.390000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [4294680.390000] ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) [4294680.390000] ata3.00: ata3: dev 0 multi count 16 [4294680.392000] ata3.00: configured for UDMA/100 [4294680.392000] scsi3 : sata_sil24 [4294680.739000] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [4294680.739000] ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) [4294680.739000] ata4.00: ata4: dev 0 multi count 16 [4294680.742000] ata4.00: configured for UDMA/100 [4294680.742000] Vendor: ATA Model: ST3320620AS Rev: 3.AA [4294680.743000] Type: Direct-Access ANSI SCSI revision: 05 [4294680.744000] Vendor: ATA Model: ST3320620AS Rev: 3.AA [4294680.745000] Type: Direct-Access ANSI SCSI revision: 05 [4294680.746000] Vendor: ATA Model: ST3320620AS Rev: 3.AA [4294680.747000] Type: Direct-Access ANSI SCSI revision: 05 [4294680.748000] Vendor: ATA Model: ST3320620AS Rev: 3.AA [4294680.749000] Type: Direct-Access ANSI SCSI revision: 05 [4294680.749000] Vendor: ATA Model: ST3320620AS Rev: 3.AA [4294680.751000] Type: Direct-Access ANSI SCSI revision: 05 [4294680.752000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [4294680.752000] sda: Write Protect is off [4294680.752000] sda: Mode Sense: 00 3a 00 00 [4294680.752000] SCSI device sda: drive cache: write back [4294680.752000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [4294680.752000] sda: Write Protect is off [4294680.752000] sda: Mode Sense: 00 3a 00 00 [4294680.752000] SCSI device sda: drive cache: write back [4294680.753000] sda: sda1 [4294680.768000] sd 0:0:0:0: Attached scsi disk sda [4294680.768000] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) [4294680.768000] sdb: Write Protect is off [4294680.769000] sdb: Mode Sense: 00 3a 00 00 [4294680.769000] SCSI device sdb: drive cache: write back [4294680.769000] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) [4294680.769000] sdb: Write Protect is off [4294680.769000] sdb: Mode Sense: 00 3a 00 00 [4294680.769000] SCSI device sdb: drive cache: write back [4294680.769000] sdb: sdb1 [4294680.781000] sd 1:0:0:0: Attached scsi disk sdb [4294680.781000] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) [4294680.781000] sdc: Write Protect is off [4294680.781000] sdc: Mode Sense: 00 3a 00 00 [4294680.782000] SCSI device sdc: drive cache: write back [4294680.782000] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) [4294680.782000] sdc: Write Protect is off [4294680.782000] sdc: Mode Sense: 00 3a 00 00 [4294680.782000] SCSI device sdc: drive cache: write back [4294680.782000] sdc: sdc1 [4294680.795000] sd 1:0:2:0: Attached scsi disk sdc [4294680.796000] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) [4294680.796000] sdd: Write Protect is off [4294680.796000] sdd: Mode Sense: 00 3a 00 00 [4294680.796000] SCSI device sdd: drive cache: write back [4294680.796000] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) [4294680.796000] sdd: Write Protect is off [4294680.796000] sdd: Mode Sense: 00 3a 00 00 [4294680.796000] SCSI device sdd: drive cache: write back [4294680.796000] sdd: sdd1 [4294680.806000] sd 2:0:0:0: Attached scsi disk sdd [4294680.806000] SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB) [4294680.806000] sde: Write Protect is off [4294680.806000] sde: Mode Sense: 00 3a 00 00 [4294680.806000] SCSI device sde: drive cache: write back [4294680.807000] SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB) [4294680.807000] sde: Write Protect is off [4294680.807000] sde: Mode Sense: 00 3a 00 00 [4294680.807000] SCSI device sde: drive cache: write back [4294680.807000] sde: sde1 [4294680.830000] sd 3:0:0:0: Attached scsi disk sde [4294680.831000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294680.831000] sd 1:0:0:0: Attached scsi generic sg1 type 0 [4294680.831000] sd 1:0:2:0: Attached scsi generic sg2 type 0 [4294680.831000] sd 2:0:0:0: Attached scsi generic sg3 type 0 [4294680.832000] sd 3:0:0:0: Attached scsi generic sg4 type 0 [4294680.832000] usbcore: registered new driver usbkbd [4294680.832000] drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver [4294680.832000] usbcore: registered new driver usbmouse [4294680.832000] drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver [4294680.833000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [4294681.868000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294681.869000] mice: PS/2 mouse device common for all mice [4294681.869000] md: linear personality registered for level -1 [4294681.869000] md: raid0 personality registered for level 0 [4294681.869000] md: raid1 personality registered for level 1 [4294681.869000] md: raid10 personality registered for level 10 [4294681.869000] md: raid5 personality registered for level 5 [4294681.869000] md: raid4 personality registered for level 4 [4294681.869000] raid5: measuring checksumming speed [4294681.874000] 8regs : 732.000 MB/sec [4294681.879000] 8regs_prefetch: 592.000 MB/sec [4294681.884000] 32regs : 356.000 MB/sec [4294681.889000] 32regs_prefetch: 332.000 MB/sec [4294681.894000] pII_mmx : 1024.000 MB/sec [4294681.899000] p5_mmx : 1056.000 MB/sec [4294681.899000] raid5: using function: p5_mmx (1056.000 MB/sec) [4294681.916000] raid6: int32x1 97 MB/s [4294681.933000] raid6: int32x2 85 MB/s [4294681.950000] raid6: int32x4 97 MB/s [4294681.967000] raid6: int32x8 93 MB/s [4294681.984000] raid6: mmxx1 226 MB/s [4294682.001000] raid6: mmxx2 265 MB/s [4294682.001000] raid6: using algorithm mmxx2 (265 MB/s) [4294682.001000] md: raid6 personality registered for level 6 [4294682.001000] md: multipath personality registered for level -4 [4294682.001000] md: faulty personality registered for level -5 [4294682.001000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294682.001000] md: bitmap version 4.39 [4294682.002000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@xxxxxxxxxx [4294682.002000] device-mapper: dm-multipath version 1.0.4 loaded [4294682.002000] device-mapper: dm-round-robin version 1.0.0 loaded [4294682.003000] TCP bic registered [4294682.003000] NET: Registered protocol family 1 [4294682.041000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294682.046000] Bridge firewalling registered [4294682.046000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx> [4294682.046000] All bugs added by David S. Miller <davem@xxxxxxxxxx> [4294682.046000] Using IPI Shortcut mode [4294682.047000] Freeing unused kernel memory: 208k freed [4294682.047000] Write protecting the kernel read-only data: 486k [4294684.053000] Attempting manual resume [4294684.097000] kjournald starting. Commit interval 5 seconds [4294684.097000] EXT3-fs: mounted filesystem with ordered data mode. [4294689.099000] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [4294689.099000] eth1: setting full-duplex. [4294690.028000] Linux agpgart interface v0.101 (c) Dave Jones [4294690.062000] agpgart: Detected an Intel 440BX Chipset. [4294690.070000] agpgart: AGP aperture is 64M @ 0xf4000000 [4294690.102000] USB Universal Host Controller Interface driver v3.0 [4294690.102000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [4294690.102000] uhci_hcd 0000:00:07.2: UHCI Host Controller [4294690.103000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [4294690.103000] uhci_hcd 0000:00:07.2: irq 12, io base 0x0000dce0 [4294690.104000] usb usb1: configuration #1 chosen from 1 choice [4294690.104000] hub 1-0:1.0: USB hub found [4294690.104000] hub 1-0:1.0: 2 ports detected [4294690.368000] NET: Registered protocol family 17 [4294691.194000] hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) [4294691.195000] Uniform CD-ROM driver Revision: 3.20 [4294691.420000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device [4294691.420000] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled! [4294694.469000] floppy0: no floppy controllers found [4294695.261000] Adding 1048568k swap on /dev/mapper/SysDisk-Swap. Priority:-1 extents:1 across:1048568k [4294695.399000] EXT3 FS on dm-0, internal journal [4294700.607000] NET: Registered protocol family 10 [4294700.607000] lo: Disabled Privacy Extensions [4294700.608000] IPv6 over IPv4 tunneling driver [4294707.008000] device-mapper: dm-linear: Device lookup failed [4294707.008000] device-mapper: error adding target to table [4294707.010000] device-mapper: dm-linear: Device lookup failed [4294707.010000] device-mapper: error adding target to table [4294707.012000] device-mapper: dm-linear: Device lookup failed [4294707.014000] device-mapper: error adding target to table [4294707.016000] device-mapper: dm-linear: Device lookup failed [4294707.016000] device-mapper: error adding target to table [4294707.031000] device-mapper: dm-linear: Device lookup failed [4294707.031000] device-mapper: error adding target to table [4294707.034000] device-mapper: dm-linear: Device lookup failed [4294707.034000] device-mapper: error adding target to table [4294707.036000] device-mapper: dm-linear: Device lookup failed [4294707.036000] device-mapper: error adding target to table [4294707.039000] device-mapper: dm-linear: Device lookup failed [4294707.039000] device-mapper: error adding target to table [4294707.041000] device-mapper: dm-linear: Device lookup failed [4294707.041000] device-mapper: error adding target to table [4294707.044000] device-mapper: dm-linear: Device lookup failed [4294707.044000] device-mapper: error adding target to table [4294707.046000] device-mapper: dm-linear: Device lookup failed [4294707.046000] device-mapper: error adding target to table [4294707.048000] device-mapper: dm-linear: Device lookup failed [4294707.048000] device-mapper: error adding target to table [4294707.050000] device-mapper: dm-linear: Device lookup failed [4294707.050000] device-mapper: error adding target to table [4294707.053000] device-mapper: dm-linear: Device lookup failed [4294707.053000] device-mapper: error adding target to table [4294707.055000] device-mapper: dm-linear: Device lookup failed [4294707.055000] device-mapper: error adding target to table [4294707.057000] device-mapper: dm-linear: Device lookup failed [4294707.058000] device-mapper: error adding target to table [4294707.060000] device-mapper: dm-linear: Device lookup failed [4294707.060000] device-mapper: error adding target to table [4294707.062000] device-mapper: dm-linear: Device lookup failed [4294707.063000] device-mapper: error adding target to table [4294707.728000] kjournald starting. Commit interval 5 seconds [4294707.730000] EXT3 FS on hda1, internal journal [4294707.730000] EXT3-fs: mounted filesystem with ordered data mode. [4294707.746000] kjournald starting. Commit interval 5 seconds [4294707.749000] EXT3 FS on dm-1, internal journal [4294707.749000] EXT3-fs: mounted filesystem with ordered data mode. [4294710.761000] eth1: no IPv6 routers present [4294756.449000] SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB) [4294756.450000] sde: Write Protect is off [4294756.450000] sde: Mode Sense: 00 3a 00 00 [4294756.452000] SCSI device sde: drive cache: write back [4294756.452000] sde: sde1 [4294758.465000] SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB) [4294758.466000] sde: Write Protect is off [4294758.466000] sde: Mode Sense: 00 3a 00 00 [4294758.468000] SCSI device sde: drive cache: write back [4294758.468000] sde: sde1
