Hello,
I'm using a 2.6.18-rc4-git1 kernel with the libata patch.
All of the sata channels are working via ahci but the PATA
on the Jmicron controler won't seem to come up properly.
All that's connected via PATA is a BENQ DVD-RW drive.
>From dmesg:
scsi8 : pata_legacy
ata9: port is slow to respond, please be patient
ata9: port failed to respond (30 secs)
ata9: SRST failed (status 0xFF)
ata9: SRST failed (err_mask=0x100)
ata9: softreset failed, retrying in 5 secs
ata9: SRST failed (status 0xFF)
ata9: SRST failed (err_mask=0x100)
ata9: softreset failed, retrying in 5 secs
ata9: SRST failed (status 0xFF)
ata9: SRST failed (err_mask=0x100)
ata9: reset failed, giving up
ata10: PATA max PIO4 cmd 0x170 ctl 0x376 bmdma 0x0 irq 14
scsi9 : pata_legacy
ata10: port is slow to respond, please be patient
ata10: port failed to respond (30 secs)
ata10: SRST failed (status 0xFF)
ata10: SRST failed (err_mask=0x100)
ata10: softreset failed, retrying in 5 secs
ata10: SRST failed (status 0xFF)
ata10: SRST failed (err_mask=0x100)
ata10: softreset failed, retrying in 5 secs
ata10: SRST failed (status 0xFF)
ata10: SRST failed (err_mask=0x100)
ata10: reset failed, giving up
>From lspci:
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Con
troller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Unknown device b000
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at eb000000 (32-bit, non-prefetchable)
[size=8K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint IRQ 1
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Contr
oller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device b000
Flags: fast devsel
I/O ports at 9000 [disabled] [size=8]
I/O ports at 9400 [disabled] [size=4]
I/O ports at 9800 [disabled] [size=8]
I/O ports at 9c00 [disabled] [size=4]
I/O ports at a000 [disabled] [size=16]
Capabilities: [68] Power Management version 2
I assume pata_legacy is the module to use here as there
doesn't seem to be a module for jmicron specificly.
Best,
Shane
--
http://www.cm.nu/~shane/
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
