Re: /dev/sd*

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 09, 2006 at 11:01:43PM +0100, Alan Cox wrote:
> Ar Mer, 2006-08-09 am 23:21 +0200, ysgrifennodd Adrian Bunk:
> > It might be a bit out of the scope of this thread, but why do some many 
> > subsystems use the /dev/sd* namespace?
> > 
> > Real SCSI devices use it.
> > The USB mass storage driver uses it.
> 
> USB storage is real SCSI.

Real SCSI for a developer, for a user it's USB.

And things become even more confusing considering that the drive might 
show up as /dev/sda or /dev/uba depending on the driver used.

> > libata uses it.
> > 
> > I'd expext SATA or PATA devices at /dev/hd* or perhaps at /dev/ata* - 
> > but why are they at /dev/sd*?
> 
> ATA uses the top half of the scsi stack so ends up using the top layer
> scsi drivers. Its probably more efficient than writing new driver
> clones, especially as non disk ATA is also real SCSI (or very close).

You are talking about kernel<->kernel and kernel<->hardware interfaces.

I'm more concerned about the kernel<->userspace interface.

> You can use /dev/ata if you want - its just a udev problem ;)

Or by adding some manual links if using a static /dev.

But I'm still not getting the point why the /dev/sd* namespace has to be 
used.

> Alan

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux