Roger Heflin wrote:
Hello,
On Linux when interrupts are defined similar to below, what defines say
ide2, ide3 to be on the same interrupt? The bios, linux, the driver
using
the interrupt? And can that be controlled/overrode at the
kernel/driver level?
Typically this is determined by the hardware routing of the interrupt
lines on the motherboard, occasionally the BIOS. There isn't usually
much that can be done about the sharing at the kernel level.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@xxxxxxxxxxxxx
Home Page: http://www.roberthancock.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
