Linux IDE Archive

• Thread Index

• Re : sata_sil problems with SIL3512 controler on a ppc target
  • From: snatcher snatcher
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Brice Goglin
• [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• [PATCH] sata_vsc: s/host_set/host/
  • From: Tejun Heo
• sata_sil problems with SIL3512 controler on a ppc target
  • From: snatcher snatcher
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: PATA driver for ide-pmac?
  • From: Benjamin Herrenschmidt
• Re: sata_via broken in 2.6.19rc4
  • From: Jeff Garzik
• Re: PATA driver for ide-pmac?
  • From: Jeff Garzik
• Re: sata_mv 7042 support and port multipliers
  • From: Jeff Garzik
• Re: sata_mv 7042 support and port multipliers
  • From: Robin H. Johnson
• Problems with Samsung SH-W163A SATA CD/DVDRW JMicron 20360/20363 2.6.18.1
  • From: Andrew Lyon
• Re: Problems with Samsung SH-W163A SATA CD/DVDRW JMicron 20360/20363 2.6.18.1
  • From: Alan Cox
• Re: [PATCH 1/1] libata: Convert from module_init to subsys_initcall
  • From: Brian King
• RE: pata_amd.c version 0.2.4
  • From: Andrei Tanas
• [git patches] libata via probe fix
  • From: Jeff Garzik
• PATA driver for ide-pmac?
  • From: Robin H. Johnson
• Re: [PATCH 2/2] Workaround for SB600 SATA ODD issue
  • From: Jeff Garzik
• [PATCH 2.6.19-rc4-mm2] sata_sis: slave support on SiS965
  • From: Uwe Koziolek
• Re: [PATCH 2.6.19-rc4-mm2] sata_sis: slave support on SiS965
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: Jeff Garzik
• sata_via broken in 2.6.19rc4
  • From: Martin Devera
• Re: Libata and Drive Write Cache Disable
  • From: Don Dupuis
• Re: Libata and Drive Write Cache Disable
  • From: Mark Lord
• Re: sata_mv 7042 support and port multipliers
  • From: Mark Lord
• 2.6.19-rc4: known unfixed regressions (v4)
  • From: Adrian Bunk
• RE: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Peer Chen
• Re: [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• Re: [PATCH 1/2 #upstream] ahci: preserve PORTS_IMPL over host resets
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: daniel@xxxxxxxxxxxxxxxx
• Libata and Drive Write Cache Disable
  • From: Don Dupuis
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: daniel@xxxxxxxxxxxxxxxx
• Re: Supported chipsets with sata_sil24?
  • From: Tejun Heo
• Re: Supported chipsets with sata_sil24?
  • From: John Woznack
• Re: sata_mv 7042 support and port multipliers
  • From: Jeff Garzik
• sata_mv 7042 support and port multipliers
  • From: Robin H. Johnson
• Re: [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Robin H. Johnson
• [PATCH] Add MPC52xx PIO/ATA support for arch/powerpc
  • From: Nicolas DET
• Re: More Promise chipset specs opened
  • From: otto Meier
• Re: More Promise chipset specs opened
  • From: Jeff Garzik
• Re: More Promise chipset specs opened
  • From: otto Meier
• Re: Supported chipsets with sata_sil24?
  • From: Tejun Heo
• Supported chipsets with sata_sil24?
  • From: John Woznack
• Re: More Promise chipset specs opened
  • From: Jeff Garzik
• Re: recommendations for a *stable* sata card
  • From: Soeren Sonnenburg
• Re: And Again: VIA SATA drivers for Linux
  • From: Paul de Leng
• More Promise chipset specs opened
  • From: otto Meier
• Re: And Again: VIA SATA drivers for Linux
  • From: Alan Cox
• And Again: VIA SATA drivers for Linux
  • From: Paul de Leng
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Brad Campbell
• RE: [PATCH ] ahci: Add the support of nvidia AHCI controllers of MCP67 to ahci.c
  • From: Peer Chen
• Re: [git patches] libata: some last minute PCI IDs
  • From: Jeff Garzik
• [git patches] libata PCI ids (updated)
  • From: Jeff Garzik
• Buffer-cache corruption with SMP + PIO IDE
  • From: Nathaniel Case
• Re: [git patches] libata: some last minute PCI IDs
  • From: Andrew Morton
• [git patches] libata: some last minute PCI IDs
  • From: Jeff Garzik
• Re: [PATCH ] ahci: Add the support of nvidia AHCI controllers of MCP67 to ahci.c
  • From: Jeff Garzik
• Re: [PATCH 2/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Jeff Garzik
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Alan Cox
• Re: AHCI should try to claim all AHCI controllers
  • From: Martin Waitz
• Re: [PATCH 1/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Alan Cox
• Re: [PATCH 2/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Alan Cox
• Re: [git patches] libata fixes
  • From: Jens Axboe
• More Promise chipset specs opened
  • From: Jeff Garzik
• Promise 20319 chipset specs opened
  • From: Jeff Garzik
• [PATCH 1/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Peer Chen
• [PATCH 2/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Peer Chen
• [PATCH ] ahci: Add the support of nvidia AHCI controllers of MCP67 to ahci.c
  • From: Peer Chen
• [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• [PATCH 1/2 #upstream] ahci: preserve PORTS_IMPL over host resets
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Andrew Morton
• [KJ][PATCH] ata: remove compiler warnings
  • From: Mike D. Day
• Re: sata_promise issue with SATA 300 TX4 (PDC40718)
  • From: Ansgar Knappheide
• Re: [git patches] libata fixes
  • From: Alan Cox
• Re: AHCI should try to claim all AHCI controllers
  • From: Mark Lord
• RE: SATA HSM error
  • From: Rune Torgersen
• Re: [git patches] libata fixes
  • From: John Stoffel
• RE: AHCI should try to claim all AHCI controllers
  • From: Conke Hu
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Brad Campbell
• Re: AHCI should try to claim all AHCI controllers
  • From: Alan Cox
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Alan Cox
• Re: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67support to sata_nv.c
  • From: Jeff Garzik
• Re: [PATCH 1/3 #upstream] libata: implement ATA_EHI_PRINTINFO
  • From: Jeff Garzik
• RE: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67support to sata_nv.c
  • From: Peer Chen
• Re: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67support to sata_nv.c
  • From: Jeff Garzik
• [PATCH] libata: move dev->max_sectors configuration into ata_dev_configure()
  • From: Tejun Heo
• [PATCH 2/3 #upstream] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODE
  • From: Tejun Heo
• [PATCH 1/3 #upstream] libata: implement ATA_EHI_PRINTINFO
  • From: Tejun Heo
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Jeff Garzik
• Re: [PATCH 1/3 #upstream] ahci: kill AHCI_FLAG_RESET_NEEDS_CLO
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: fix status register check in ahci_softreset
  • From: Jeff Garzik
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Tejun Heo
• [PATCH 2/2] sata_nv: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• [PATCH 3/3 #upstream] ahci: update ahci-vt8251 reset sequence
  • From: Tejun Heo
• [PATCH 2/3 #upstream] libata: separate out and export sata_port_hardreset()
  • From: Tejun Heo
• [PATCH 1/3 #upstream] ahci: kill AHCI_FLAG_RESET_NEEDS_CLO
  • From: Tejun Heo
• [PATCH #upstream-fixes] ahci: fix status register check in ahci_softreset
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Arjan van de Ven
• [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Jeff Garzik
• Re: [PATCH 3/6] libata: convert @post_reset to @flags in ata_dev_read_id()
  • From: Jeff Garzik
• Re: AHCI should try to claim all AHCI controllers
  • From: Jeff Garzik
• Re: AHCI should try to claim all AHCI controllers
  • From: Linus Torvalds
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Jeff Garzik
• Re: [PATCH 7/12] sata_sil24: add PMP related constants
  • From: Jeff Garzik
• Re: [PATCH 6/12] sata_sil24: rename PMP related constants
  • From: Jeff Garzik
• Re: [PATCH] libata: make user scan wait for scan to complete
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: SRST sometimes fails after hotplug, use HRST_TO_RESUME
  • From: Jeff Garzik
• Re: [PATCH] libata: move ata_irq_on() into libata-sff.c
  • From: Jeff Garzik
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Tejun Heo
• Re: AHCI should try to claim all AHCI controllers
  • From: Jeff Garzik
• Re: AHCI should try to claim all AHCI controllers
  • From: Jeff Garzik
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Jeff Garzik
• Re: [PATCH] libata: handle 0xff status properly
  • From: Jeff Garzik
• Re: [PATCHSET] prep for PMP support, take 3
  • From: Tejun Heo
• Re: [PATCHSET] hotplug polling, take 5
  • From: Tejun Heo
• Re: [PATCHSET] hotplug polling, take 5
  • From: Jeff Garzik
• Re: [PATCHSET] hotplug polling, take 5
  • From: Tejun Heo
• Re: SATA HSM error
  • From: Tejun Heo
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Jeff Garzik
• Re: [PATCHSET] implement ata_link, take 3
  • From: Jeff Garzik
• Re: [PATCH 10/18] [PATCH] libata-link: separate out link initialization functions
  • From: Jeff Garzik
• Re: [PATCHSET] prep for PMP support, take 3
  • From: Jeff Garzik
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [Patch] SCSI: Add nvidia AHCI controllers of MCP67 support to ahci.c
  • From: Jeff Garzik
• Re: [PATCHSET] hotplug polling, take 5
  • From: Jeff Garzik
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Jeff Garzik
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Jeff Garzik
• Re: [PATCH 1/4] libata: implement ATA_EHI_PRINTINFO
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: Jeff Garzik
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Jeff Garzik
• Re: [Patch 1/2] SCSI: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Jeff Garzik
• Re: [Patch] SCSI: Add nvidia AHCI controllers of MCP67 support to ahci.c
  • From: Jeff Garzik
• Re: [Patch] SCSI: Add nvidia AHCI controllers of MCP67 support to ahci.c
  • From: Andrew Morton
• SATA HSM error
  • From: Rune Torgersen
• Re: 2.6.19-rc4: known unfixed regressions
  • From: Arjan van de Ven
• Re: 2.6.19-rc4: known unfixed regressions
  • From: Greg KH
• 2.6.19-rc4: known unfixed regressions
  • From: Adrian Bunk
• Re: scary message 'failed to recover some devices ... retrying' HPT370
  • From: Alan Cox
• Fwd: RH [Bug 199216] Sata_promise works for kernel 2.6.16-1.2122_FC5 but not for 2.6.17-1.2157_FC5
  • From: Jason_Mack
• scary message 'failed to recover some devices ... retrying' HPT370
  • From: jurriaan
• AHCI should try to claim all AHCI controllers
  • From: Conke Hu
• Re: M-Systems SATA FFD fails IDENTIFY cmd
  • From: Martin Hicks
• sata_nv: hot plug or hotswap?
  • From: Tomasz Torcz
• Re: kernel support for Marvell 88SE614x chipset
  • From: Alan Cox
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Prakash Punnoor
• RE: [Patch 2/2] SCSI: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• RE: [Patch 1/2] SCSI: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• RE: [Patch] SCSI: Add nvidia AHCI controllers of MCP67 support to ahci.c
  • From: Peer Chen
• Summary of libata-dev backlog
  • From: Tejun Heo
• sata_via and VT6421 PATA support?
  • From: Tomasz Chmielewski
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Christoph Hellwig
• Re: M-Systems SATA FFD fails IDENTIFY cmd
  • From: Tejun Heo
• kernel support for Marvell 88SE614x chipset
  • From: Evan_D
• Re: [Patch] IDE: Add nvidia IDE controller of MCP67 support to amd74xx.c
  • From: Alan Cox
• [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Peer Chen
• [Patch] SCSI: Add nvidia AHCI controllers of MCP67 support to ahci.c
  • From: Peer Chen
• [Patch 1/2] SCSI: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• [Patch] IDE: Add nvidia IDE controller of MCP67 support to amd74xx.c
  • From: Peer Chen
• [Patch 2/2] SCSI: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• RE: SATA driver issues?
  • From: Danny Sung
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Jonathan Bell
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Mark Lord
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Arjan van de Ven
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Mark Lord
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Mark Lord
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Mark Lord
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Mark Lord
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Ingo Molnar
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Arjan van de Ven
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Mark Lord
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Ingo Molnar
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: Sil 3124 Pci Express?
  • From: Eric D. Mudama
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Arjan van de Ven
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Arjan van de Ven
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Arjan van de Ven
• Re: 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Jens Axboe
• 2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
  • From: Mark Lord
• software write protect device
  • From: James Courtier-Dutton
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Jens Axboe
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Gregor Jasny
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Gregor Jasny
• Re: sata_promise issue with SATA 300 TX4 (PDC40718)
  • From: Ansgar Knappheide
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Jens Axboe
• Re: sata_promise TX2/TX4 cards rejecting smart auto-offline & auto-save ata cmds?
  • From: Tejun Heo
• Re: sata_promise TX2/TX4 cards rejecting smart auto-offline & auto-save ata cmds?
  • From: Andrew Paprocki
• Re: sata_promise TX2/TX4 cards rejecting smart auto-offline & auto-save ata cmds?
  • From: Tejun Heo
• sata_promise TX2/TX4 cards rejecting smart auto-offline & auto-save ata cmds?
  • From: Andrew Paprocki
• sata_promise.c missing .error_handler in port ops?
  • From: Andrew Paprocki
• [PATCH] Added S.M.A.R.T. command decoding to libata error reporting.
  • From: Andrew Paprocki
• 2.6.19-rc3: known unfixed regressions (v3)
  • From: Adrian Bunk
• Re: SiS 965L version 0x0183
  • From: Uwe Koziolek
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Brice Goglin
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Ken Moffat
• 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Gregor Jasny
• [PATCH] drivers/ide/pci/generic.c: add missing newline to the all-generic-ide message
  • From: Sergey Vlasov
• Re: sata_promise issue with SATA 300 TX4 (PDC40718)
  • From: Ansgar Knappheide
• SiS 965L version 0x0183
  • From: bogus nominus
• sata_promise issue with SATA 300 TX4 (PDC40718)
  • From: Theo Baumgartner
• Re: Sil 3124 Pci Express?
  • From: Richard Scobie
• Re: Sil 3124 Pci Express?
  • From: Andrew Lyon
• Re: Sil 3124 Pci Express?
  • From: Andrew Lyon
• Re: Sil 3124 Pci Express?
  • From: Carlos Vidal
• Sil 3124 Pci Express?
  • From: Andrew Lyon
• cd media poll stuck in D state, arch bug?
  • From: Olaf Hering
• Re: Problems writing with Samsung SH-W163A SATA CD/DVDRW
  • From: Andrew Lyon
• RE: [PATCH] sata_nv ADMA/NCQ support for nForce4 (v7)
  • From: Allen Martin
• Re: [Q] ide cdrom in native mode leads to irq storm?
  • From: Alan Cox
• Re: [Q] ide cdrom in native mode leads to irq storm?
  • From: Vasily Averin
• [PATCH]: JMB 368 PATA detection
  • From: Alan Cox
• 2.6.19-rc3: known unfixed regressions (v2)
  • From: Adrian Bunk
• [PATCH] sata_nv ADMA/NCQ support for nForce4 (v7)
  • From: Robert Hancock
• Re: [PATCH] ata: Generic platform_device libata driver, take 2.
  • From: Paul Mundt
• Re: Slow SATA detection on bootup
  • From: Stephen Hemminger
• Re: Slow SATA detection on bootup
  • From: Jeff Garzik
• Slow SATA detection on bootup
  • From: Stephen Hemminger
• Re: 2.6.19-rc2: known unfixed regressions (v3)
  • From: Michael S. Tsirkin
• Re: 2.6.19-rc2: known unfixed regressions (v3)
  • From: Pavel Machek
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Tejun Heo
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Tejun Heo
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Benjamin Herrenschmidt
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Benjamin Herrenschmidt
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Mark Hatle
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Mark Hatle
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Tejun Heo
• sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Mark Hatle
• Re: 2.6.19-rc2 - Cable detection problem in pata_amd
  • From: Walt H
• Re: 2.6.19-rc2 - Cable detection problem in pata_amd
  • From: Walt H
• Re: SiI 3124 PCI-X
  • From: Carlos Vidal
• 2.6.19-rc3 pata_hpt37x dying with "irq 16: nobody cared"
  • From: Brad Campbell
• 2.6.19-rc3: known unfixed regressions
  • From: Adrian Bunk
• RE: SATA driver issues?
  • From: Danny Sung
• M-Systems SATA FFD fails IDENTIFY cmd
  • From: Martin Hicks
• Re: 2.6.19-rc2 - Cable detection problem in pata_amd
  • From: Gene Heskett
• Re: 2.6.19-rc2: known unfixed regressions (v3)
  • From: Michael S. Tsirkin
• Re: sata_via issue for VIA Epia SP8000 in 2.6.18[.1]?
  • From: Udo van den Heuvel
• [PATCH 1/1] libata: Convert from module_init to subsys_initcall
  • From: Brian King
• Re: 2.6.19-rc2 - Cable detection problem in pata_amd
  • From: Alan Cox
• Re: SATA driver issues?
  • From: Alan Cox
• Linux 2007 File System & IO Workshop
  • From: Ric Wheeler
• Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: David Howells
• Re: [Q] ide cdrom in native mode leads to irq storm?
  • From: Vasily Averin
• [Q] ide cdrom in native mode leads to irq storm?
  • From: Vasily Averin
• Re: SATA driver issues?
  • From: Benjamin Herrenschmidt
• Re: SATA driver issues?
  • From: Benjamin Herrenschmidt
• SATA driver issues?
  • From: Danny Sung
• Re: sata_via issue for VIA Epia SP8000 in 2.6.18[.1]?
  • From: Daniel Drake
• 2.6.19-rc2 - Cable detection problem in pata_amd
  • From: Walt H
• recommendations for a *stable* sata card
  • From: Greg Freemyer
• Re: [PATCH] ata: Generic platform_device libata driver, take 2.
  • From: Russell King
• vendor unique commands
  • From: Martin Hicks
• SATA timeout problems with kernel 2.4.33.3
  • From: Uma Gavani
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Alan Cox
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Douglas Gilbert
• promise-sata-pata crash on boot
  • From: Daniel Drake
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Jonathan Bell
• Re: [PATCH] sata_sis: fix flags handling for the secondary port
  • From: Patrick McHardy
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Alan Cox
• Re: sata_sis only recognizing primary drive in 2.6.18
  • From: Uwe Koziolek
• [PATCH] ata: Generic platform_device libata driver, take 2.
  • From: Paul Mundt
• [PATCH] sata_sis: fix flags handling for the secondary port
  • From: Tejun Heo
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Tejun Heo
• Re: [PATCHSET] ahci updates regarding vt8251 support, take #2
  • From: Tejun Heo
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Tejun Heo
• Re: sata_sis only recognizing primary drive in 2.6.18
  • From: Tejun Heo
• [PATCH] sata_nv ADMA/NCQ support for nForce4 (v6)
  • From: Robert Hancock
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4 (updated) II
  • From: Robert Hancock
• Re: [2.6.19-rc2] SATA boot problems
  • From: Robert Wruck
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Jonathan Bell
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4 (updated) II
  • From: Andi Kleen
• Re: sata_via issue for VIA Epia SP8000 in 2.6.18[.1]?
  • From: Udo van den Heuvel
• sata_via issue for VIA Epia SP8000 in 2.6.18[.1]?
  • From: Udo van den Heuvel
• 2.6.19-rc2: known unfixed regressions (v3)
  • From: Adrian Bunk
• recommendations for a *stable* sata card
  • From: Soeren Sonnenburg
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4 (updated) II
  • From: Robert Hancock
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4 (updated) II
  • From: Andi Kleen
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4 (updated)
  • From: Andi Kleen
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Douglas Gilbert
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Jeff Garzik
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Douglas Gilbert
• Re: sata_sis only recognizing primary drive in 2.6.18
  • From: Uwe Koziolek
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Jeff Garzik
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Douglas Gilbert
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCHSET] ahci updates regarding vt8251 support, take #2
  • From: Jeff Garzik
• Re: [PATCH] libata: typo fix
  • From: Jeff Garzik
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Jeff Garzik
• Re: [2.6.19 patch] drivers/ide/pci/generic.c: re-add the __setup("all-generic-ide",...)
  • From: Randy Dunlap
• [PMP] libata-tj-2.6.18.1-20061020 sil3132 success
  • From: Daniel Schröder
• [PATCH] sata_nv ADMA/NCQ support for nForce4 (updated)
  • From: Robert Hancock
• Re: incoming
  • From: Alan Cox
• [patch 01/12] ATA must depend on BLOCK
  • From: akpm
• [patch 10/12] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws
  • From: akpm
• [patch 08/12] ahci: readability tweak
  • From: akpm
• [patch 11/12] pata_marvell: Marvell 6101/6145 PATA driver
  • From: akpm
• [patch 07/12] ata_piix: strip now unneded MAP related stuff
  • From: akpm
• [patch 03/12] libata: unexport ata_dev_revalidate()
  • From: akpm
• [patch 09/12] libata-sff: Allow for wacky systems
  • From: akpm
• [patch 02/12] ata_piix: clean up port flags
  • From: akpm
• incoming
  • From: Andrew Morton
• [patch 12/12] libata: use correct map_db values for ICH8
  • From: akpm
• [patch 06/12] ata_piix: apply device detection via polling IDENTIFY
  • From: akpm
• [patch 04/12] libata: convert @post_reset to @flags in ata_dev_read_id()
  • From: akpm
• [patch 05/12] libata: implement presence detection via polling IDENTIFY
  • From: akpm
• Re: Linux 2.6.19-rc2
  • From: Jeff Garzik
• Re: [2.6.19 patch] drivers/ide/pci/generic.c: re-add the __setup("all-generic-ide",...)
  • From: Adrian Bunk
• Re: [Fwd: [BUG] sata_via doesn't detect anymore my disks (broken between rc1 and rc3)]
  • From: Thierry Vignaud
• Re: [patch] libata: use correct map_db values for ICH8
  • From: Tejun Heo
• Re: [patch] libata: use correct map_db values for ICH8
  • From: Kristen Carlson Accardi
• Re: Problems writing with Samsung SH-W163A SATA CD/DVDRW
  • From: Tejun Heo
• Re: Problems writing with Samsung SH-W163A SATA CD/DVDRW
  • From: Andrew Lyon
• Re: [patch] libata: use correct map_db values for ICH8
  • From: Tejun Heo
• Re: [2.6.19-rc2] SATA boot problems
  • From: Tejun Heo
• regarding sata_sis kernel freeze when BIOS is not updated to support LBA48
  • From: Tejun Heo
• Re: Problems writing with Samsung SH-W163A SATA CD/DVDRW
  • From: Tejun Heo
• Re: Question about Scsi error handling/recovery
  • From: Tejun Heo
• [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Tejun Heo
• Re: [2.6.19 patch] drivers/ide/pci/generic.c: re-add the __setup("all-generic-ide",...)
  • From: Randy Dunlap
• [patch] libata: use correct map_db values for ICH8
  • From: Kristen Carlson Accardi
• Re: [2.6.19 patch] drivers/ide/pci/generic.c: re-add the __setup("all-generic-ide",...)
  • From: Adrian Bunk
• Re: [2.6.19 patch] drivers/ide/pci/generic.c: re-add the __setup("all-generic-ide",...)
  • From: Alan Cox
• Re: [2.6.19-rc2] SATA boot problems
  • From: Mark Lord
• Re: Question about Scsi error handling/recovery
  • From: Fajun Chen
• [2.6.19 patch] drivers/ide/pci/generic.c: re-add the __setup("all-generic-ide",...)
  • From: Adrian Bunk
• [PATCH 1/4] libata: implement ATA_EHI_PRINTINFO
  • From: Tejun Heo
• [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Tejun Heo
• [PATCHSET] sata_sil: implement Mod15Write workaround by split request processing
  • From: Tejun Heo
• [PATCH 2/4] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODE
  • From: Tejun Heo
• [PATCH 3/4] libata: move dev->max_sectors configuration into ata_dev_configure()
  • From: Tejun Heo
• [PATCH] libata: typo fix
  • From: Tejun Heo
• Re: Question about Scsi error handling/recovery
  • From: Tejun Heo
• Question about Scsi error handling/recovery
  • From: Fajun Chen
• Re: sata_mv problems on Marvell MV88SX5081
  • From: Roger Heflin
• [PATCH] lockdep: fix ide/proc interaction
  • From: Peter Zijlstra
• Re: [PATCHSET] ahci updates regarding vt8251 support, take #2
  • From: Aalderd Bouwman
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Tejun Heo
• Re: sata_mv problems on Marvell MV88SX5081
  • From: Jiri Kosina
• Re: sata_mv problems on Marvell MV88SX5081
  • From: Mark Lord
• Re: [PATCHSET] ahci updates regarding vt8251 support, take #2
  • From: Tejun Heo
• sata_mv problems on Marvell MV88SX5081
  • From: Jiri Kosina
• Problems writing with Samsung SH-W163A SATA CD/DVDRW
  • From: Andrew Lyon
• Problems writing with Samsung SH-W163A SATA CD/DVDRW
  • From: Andrew Lyon
• Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Avi Kivity
• Re: [PATCHSET] ahci updates regarding vt8251 support, take #2
  • From: Aalderd Bouwman
• Re: CFP: Linux 2007 File System & IO Workshop
  • From: Luben Tuikov
• Re: CFP: Linux 2007 File System & IO Workshop
  • From: James Bottomley
• Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Ryan Richter
• Re: CFP: Linux 2007 File System & IO Workshop
  • From: Luben Tuikov
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Jesse Brandeburg
• Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Alan Cox
• Re: CFP: Linux 2007 File System & IO Workshop
  • From: James Bottomley
• Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Ryan Richter
• Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Alan Cox
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4
  • From: Mark Lord
• Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Avi Kivity
• Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Ryan Richter
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4
  • From: Roland Dreier
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4
  • From: Mark Lord
• Re: libata hotplug and md raid?
  • From: Gabor Gombas
• Re: libata hotplug and md raid?
  • From: Gabor Gombas
• [RFT PATCH] ahci PMP support
  • From: Tejun Heo
• Re: dvd-r detection problem with port multiplier
  • From: Tejun Heo
• Oops, this is [PATCHSET] implement PMP support, take 3
  • From: Tejun Heo
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4
  • From: Robert Hancock
• Re: [PATCH] sata_nv ADMA/NCQ support for nForce4
  • From: Mark Lord
• [PATCH] sata_nv ADMA/NCQ support for nForce4
  • From: Robert Hancock
• Re: libata hotplug and md raid?
  • From: Neil Brown
• CFP: Linux 2007 File System & IO Workshop
  • From: Ric Wheeler
• Re: libata hotplug and md raid?
  • From: Mark Lord
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Mark Lord
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Robert Hancock
• [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: Wolstenholme, Daniel E
• [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit)
  • From: Wolstenholme, Daniel E
• Re: 2.6.19-rc2 - total hang with libata, CDRW and grip
  • From: John Stoffel
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Mark Lord
• Re: hdparm -C on SATA always prints "standby"
  • From: Mark Lord
• Re: hdparm -C on SATA always prints "standby"
  • From: Mark Lord
• hdparm -C on SATA always prints "standby"
  • From: Len Brown
• Re: sata_sil and byte-aligned mmio
  • From: Tejun Heo
• Re: sata_sil and byte-aligned mmio
  • From: Tejun Heo
• 2.6.19-rc2 - total hang with libata, CDRW and grip
  • From: John Stoffel
• [PATCH 8/12] sata_sil24: replace sil24_update_tf() with sil24_read_tf()
  • From: Tejun Heo
• [PATCH 12/12] sata_sil24: implement PORT_RST
  • From: Tejun Heo
• [PATCH 11/12] sata_sil24: implement PMP support
  • From: Tejun Heo
• [PATCH 9/12] sata_sil24: separate out sil24_exec_polled_cmd()
  • From: Tejun Heo
• [PATCH 10/12] sata_sil24: separate out sil24_do_softreset()
  • From: Tejun Heo
• [PATCH 7/12] sata_sil24: add PMP related constants
  • From: Tejun Heo
• [PATCH 5/12] libata-pmp: hook PMP support and enable it
  • From: Tejun Heo
• [PATCH 6/12] sata_sil24: rename PMP related constants
  • From: Tejun Heo
• [PATCH 3/12] libata-pmp: implement ATA_LFLAG_DISABLED
  • From: Tejun Heo
• [PATCH 4/12] libata-pmp: implement Port Multiplier support
  • From: Tejun Heo
• [PATCH 1/12] libata-pmp: add PMP related constants, fields, ops and update helpers
  • From: Tejun Heo
• prep for PMP support, take 3
  • From: Tejun Heo
• [PATCH 2/12] libata-pmp: update ata_eh_reset() for PMP
  • From: Tejun Heo
• Re: [PATCHSET] prep for PMP support, take 3
  • From: Tejun Heo
• [PATCH 5/5] [PATCH] libata-pmp-prep: implement qc_defer helpers
  • From: Tejun Heo
• [PATCH 4/5] [PATCH] libata-pmp-prep: implement ops->qc_defer()
  • From: Tejun Heo
• [PATCH 2/5] [PATCH] libata-pmp-prep: make a number of functions global to libata
  • From: Tejun Heo
• [PATCH 3/5] [PATCH] libata-pmp-prep: add @is_cmd to ata_tf_to_fis()
  • From: Tejun Heo
• [PATCHSET] prep for PMP support, take 3
  • From: Tejun Heo
• [PATCH 1/5] [PATCH] libata-pmp-prep: add @new_class to ata_dev_revalidate()
  • From: Tejun Heo
• Re: [PATCHSET] implement ata_link, take 3
  • From: Tejun Heo
• [PATCH 17/18] [PATCH] libata-link: update hotplug to handle PMP links
  • From: Tejun Heo
• [PATCH 18/18] [PATCH] libata-link: update Power Management to handle PMP links
  • From: Tejun Heo
• [PATCH 16/18] [PATCH] libata-link: update EH to deal with PMP links
  • From: Tejun Heo
• [PATCH 15/18] [PATCH] libata-link: update ata_dev_configure() to deal with PMP links
  • From: Tejun Heo
• [PATCH 10/18] [PATCH] libata-link: separate out link initialization functions
  • From: Tejun Heo
• [PATCH 8/18] [PATCH] libata-link: linkify reset
  • From: Tejun Heo
• [PATCH 13/18] [PATCH] libata-link: add PMP links
  • From: Tejun Heo
• [PATCH 9/18] [PATCH] libata-link: linkify config/EH related functions
  • From: Tejun Heo
• [PATCH 5/18] [PATCH] libata-link: implement and use link/device iterators
  • From: Tejun Heo
• [PATCH 14/18] [PATCH] libata-link: update ata_scsi_error() to handle PMP links
  • From: Tejun Heo
• [PATCH 6/18] [PATCH] libata-link: linkify PHY-related functions
  • From: Tejun Heo
• [PATCH 12/18] [PATCH] libata-link: implement ata_link_abort()
  • From: Tejun Heo
• [PATCH 7/18] [PATCH] libata-link: linkify EH action helpers
  • From: Tejun Heo
• [PATCH 11/18] [PATCH] libata-link: implement link->reset_tries
  • From: Tejun Heo
• [PATCH 4/18] [PATCH] libata-link: introduce ata_link
  • From: Tejun Heo
• [PATCHSET] implement ata_link, take 3
  • From: Tejun Heo
• [PATCH 3/18] [PATCH] libata-link: add PMP related ATA constants
  • From: Tejun Heo
• [PATCH 1/18] [PATCH] libata: generate hotplug event on SError read failure
  • From: Tejun Heo
• [PATCH 2/18] [PATCH] libata-link: separate out ata_eh_handle_dev_fail()
  • From: Tejun Heo
• [PATCH 1/3] [PATCH] libata: separate out and export sata_port_hardreset()
  • From: Tejun Heo
• [PATCH 2/3] [PATCH] ahci: update softreset and kill AHCI_FLAG_RESET_NEEDS_CLO
  • From: Tejun Heo
• [PATCH 3/3] [PATCH] ahci: update ahci-vt8251 reset sequence
  • From: Tejun Heo
• [PATCHSET] ahci updates regarding vt8251 support, take #2
  • From: Tejun Heo
• [PATCH 1/3] libata: implement hotplug by polling
  • From: Tejun Heo
• [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
  • From: Tejun Heo
• [PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrutps
  • From: Tejun Heo
• [PATCHSET] hotplug polling, take 5
  • From: Tejun Heo
• Re: IDE panic, 2.6.18
  • From: Wakko Warner
• Re: IDE panic, 2.6.18
  • From: linux
• Re: [PATCHSET] ahci updates regarding vt8251 support
  • From: Tejun Heo
• Re: [PATCHSET] ahci updates regarding vt8251 support
  • From: Aalderd Bouwman
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Tejun Heo
• [1/3] 2.6.19-rc2: known unfixed regressions
  • From: Adrian Bunk
• DVD drive not recognized on Intel G965 (2.6.19-rc2)
  • From: Ryan Richter
• Re: How to test SATA NCQ feature
  • From: Fajun Chen
• Re: [PATCH] Generic platform device IDE driver
  • From: Jeff Garzik
• Re: [PATCH] Generic platform device IDE driver
  • From: Paul Mundt
• Re: How to test SATA NCQ feature
  • From: Jens Axboe
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Jens Axboe
• Re: [PATCH] Generic platform device IDE driver
  • From: Russell King
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Robert Hancock
• [PATCH 3/3] ahci: update ahci-vt8251 reset sequence
  • From: Tejun Heo
• [PATCH 1/3] libata: separate out and export sata_port_hardreset()
  • From: Tejun Heo
• [PATCH 2/3] ahci: update softreset and kill AHCI_FLAG_RESET_NEEDS_CLO
  • From: Tejun Heo
• [PATCHSET] ahci updates regarding vt8251 support
  • From: Tejun Heo
• Re: How to test SATA NCQ feature
  • From: Eric D. Mudama
• Re: How to test SATA NCQ feature
  • From: Fajun Chen
• Re: How to test SATA NCQ feature
  • From: Eric D. Mudama
• How to test SATA NCQ feature
  • From: Fajun Chen
• Re: [PATCH] Generic platform device IDE driver
  • From: Paul Mundt
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Jonathan Bell
• sata_sil and byte-aligned mmio
  • From: Kevin Hilman
• Re: [PATCH] libata: handle 0xff status properly
  • From: Alan Cox
• Re: Debugging strange system lockups possibly triggered by ATA commands
  • From: Shem Multinymous
• Re: [PATCH] Generic platform device IDE driver
  • From: Matthias Fuchs
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Jens Axboe
• [git patches] libata fixes
  • From: Jeff Garzik
• [BUG] 2.6.19-rc1: ata_piix takes excessively long to probe a nonexistent device
  • From: Kevin Radloff
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Robert Hancock
• Re: [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: matthieu castet
• Re: [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: Tejun Heo
• Re: Debugging strange system lockups possibly triggered by ATA commands
  • From: Elias Oltmanns
• Re: Debugging strange system lockups possibly triggered by ATA commands
  • From: Elias Oltmanns
• Re: [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: matthieu castet
• [BUG] .17-.19-rc1 fails to detect PIONEER DVD-RW DVR-K15, .16 works fine
  • From: Oleg Verych
• Queued patches for PIIX hardware
  • From: Art Haas
• Re: [PATCH] drivers/ide: fix error return bugs, interface
  • From: Alexey Dobriyan
• [PATCH] drivers/ide: fix error return bugs, interface
  • From: Jeff Garzik
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Prakash Punnoor
• RE: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Allen Martin
• RE: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Allen Martin
• [PATCH 1/3] libata: implement hotplug by polling
  • From: Tejun Heo
• [PATCHSET] hotplug polling, take 4
  • From: Tejun Heo
• [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
  • From: Tejun Heo
• [PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrutps
  • From: Tejun Heo
• Re: [patch 1/2] libata: _GTF support
  • From: Randy Dunlap
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Jonathan Bell
• Re: [2.6.19 patch] ATA must depend on BLOCK
  • From: Stefan Richter
• Re: [Hdaps-devel] Debugging strange system lockups possibly triggered by ATA commands
  • From: Shem Multinymous
• Re: [patch 1/2] libata: _GTF support
  • From: Stefan Seyfried
• Debugging strange system lockups possibly triggered by ATA commands
  • From: Elias Oltmanns
• [PATCH] libata: handle 0xff status properly
  • From: Tejun Heo
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Tejun Heo
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Tejun Heo
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Tejun Heo
• [PATCH] pata-qdi: fix le32 in data_xfer
  • From: Peter Korsgaard
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Joe Jin
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Tejun Heo
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Tejun Heo
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Joe Jin
• Re: feedback with VIA vt8251 and 2.6.17.4
  • From: Tejun Heo
• [PATCH] ata_piix: allow 01b MAP for both ICH6M and ICH7M
  • From: Tejun Heo
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Tejun Heo
• [PATCH] libata: fix ata_irq_on()
  • From: Tejun Heo
• [PATCH] libata: move ata_irq_on() into libata-sff.c
  • From: Tejun Heo
• [2.6.19 patch] ATA must depend on BLOCK
  • From: Adrian Bunk
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Jonathan Bell
• Re: Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Tejun Heo
• Re: sata_sis only recognizing primary drive in 2.6.18
  • From: Tejun Heo
• Re: [PATCH] libata: make user scan wait for scan to complete
  • From: Tejun Heo
• Re: Unable to find root fs with libata only 2.6.18-mm3
  • From: Tejun Heo
• Re: 2.6.19-rc1: known regressions (v2)
  • From: Trond Myklebust
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Robert Hancock
• Re: IDE panic, 2.6.18
  • From: linux
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Robert Hancock
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Jeff Garzik
• Errors when copying between drives on a SiI3114 controller under kernel 2.6.18
  • From: Jonathan Bell
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Prakash Punnoor
• 25 random kernel configs, 24 build failures - 2.6.19-rc1-git2
  • From: Jesper Juhl
• [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Robert Hancock
• Re: sata_sis only recognizing primary drive in 2.6.18
  • From: Jim Paris
• Re: 2.6.19-rc1: Oops in probe_hwif
  • From: Brent Casavant
• 2.6.19-rc1: Oops in probe_hwif
  • From: Brent Casavant
• Re: sata_sis only recognizing primary drive in 2.6.18
  • From: Uwe Koziolek
• sata_sis only recognizing primary drive in 2.6.18
  • From: Jim Paris
• feedback with VIA vt8251 and 2.6.17.4
  • From: Olivier Kaloudoff
• Re: PROBLEM: Hardlock with 2.6.18-mm3 on Abit AI7, ICH5 + EXT3/XFS, SATA under heavy I/O load
  • From: Steve Hindle
• IDE panic, 2.6.18
  • From: linux
• Re: [PATCH 2/2] [PATCH] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• Re: [PATCH 1/2] ahci: preserve PORTS_IMPL over host resets
  • From: Tejun Heo
• 2.6.19-rc1 scanning a ghost dvd drive at boot
  • From: Michael Rasenberger
• Re: [PATCH 1/2] ahci: preserve PORTS_IMPL over host resets
  • From: Jeff Garzik
• Re: [PATCH 2/2] [PATCH] ahci: honor PORTS_IMPL on ICH8s
  • From: Jeff Garzik
• Re: [PATCH] libata: make user scan wait for scan to complete
  • From: Jeff Garzik
• Re: [patch] 2.6.18: 32-bit compatibility HDIO IOCTLs
  • From: Jeff Garzik
• Re: [discuss] [patch] x86, fix rwsem build bug on CONFIG_M386=y
  • From: Andi Kleen
• Re: [PATCH] Generic platform device IDE driver
  • From: Paul Mundt
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Jens Axboe
• [patch] x86, fix rwsem build bug on CONFIG_M386=y
  • From: Ingo Molnar
• Re: 2.6.19-rc1: known regressions
  • From: Nigel Cunningham
• Re: PROBLEM: Hardlock with 2.6.1[678] on Abit AI7, ICH5 + XFS, SATA under heavy I/O load
  • From: Steve Hindle
• Re: PROBLEM: Hardlock with 2.6.1[678] on Abit AI7, ICH5 + XFS, SATA under heavy I/O load
  • From: David Chinner
• 2.6.19-rc1: known regressions
  • From: Adrian Bunk
• PROBLEM: Hardlock with 2.6.1[678] on Abit AI7, ICH5 + XFS, SATA under heavy I/O load
  • From: Steve Hindle
• Re: What's in libata-dev.git
  • From: Mark Lord
• Re: What's in libata-dev.git
  • From: Sergei Shtylyov
• Re: What's in libata-dev.git
  • From: Mark Lord
• Re: 2.4.33 ata_piix patch for Intel 82801GBM/GHM (ICH7) SATA
  • From: Jeff Garzik
• 2.4.33 ata_piix patch for Intel 82801GBM/GHM (ICH7) SATA
  • From: James E. Jarvis
• Re: [PATCH] Generic platform device IDE driver
  • From: Alan Cox
• Re: [git patches] libata updates
  • From: Alan Cox
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Jens Axboe
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: saeed bishara
• Re: [PATCH] Generic platform device IDE driver
  • From: girish
• Re: [PATCH] Generic platform device IDE driver
  • From: Paul Mundt
• Re: [PATCH] Generic platform device IDE driver
  • From: Paul Mundt
• Re: [PATCH] Generic platform device IDE driver
  • From: girish
• Re: [git patches] libata updates
  • From: Alan Cox
• Re: [PATCH] Generic platform device IDE driver
  • From: Alan Cox
• Re: PCI/IDE generic IDE driver + bus master DMA logic errors
  • From: girish
• Re: PCI/IDE generic IDE driver + bus master DMA logic errors
  • From: Alan Cox
• PCI/IDE generic IDE driver + bus master DMA logic errors
  • From: girish
• Re: [PATCH][RFT] libata AHCI reset speed-up, improvements
  • From: Michael S. Tsirkin
• Module warning in drivers/ide
  • From: Jeff Garzik
• [PATCH] Generic platform device IDE driver
  • From: Paul Mundt
• [git patches] libata updates
  • From: Jeff Garzik
• [patch] 2.6.18: 32-bit compatibility HDIO IOCTLs
  • From: Maciej W. Rozycki
• Re: [Fwd: [BUG] sata_via doesn't detect anymore my disks (broken between rc1 and rc3)]
  • From: Thierry Vignaud
• MAP value 01b for ICH6M
  • From: Jonathan Dieter
• [REQUEST] VT6421 PATA support
  • From: Michael-Luke Jones
• Re: SATA repeated failure (command 0x35 timeout, status 0xd8)
  • From: Tejun Heo
• Re: SATA status reports update
  • From: Shem Multinymous
• Re: smartctl causing HSM violation on sata_nv, 2.6.18
  • From: Doug Maxey
• Re: [PATCH] sata_promise: Port enumeration order - SATA 150 TX4, SATA 300 TX4
  • From: Evan Harris
• Re: smartctl causing HSM violation on sata_nv, 2.6.18
  • From: Tejun Heo
• Re: libata-dev.git frozen
  • From: Uwe Koziolek
• [patch] 2.6.18: Initialize the SWARM IDE driver
  • From: Maciej W. Rozycki
• Re: SATA repeated failure (command 0x35 timeout, status 0xd8)
  • From: Molle Bestefich
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Jens Axboe
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Ric Wheeler
• libata-dev.git frozen
  • From: Jeff Garzik
• VT8251 sata via controller config in 2.6.18
  • From: Jon Wilson
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Joe Jin
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Ric Wheeler
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Ric Wheeler
• Re: SATA status reports update
  • From: Tejun Heo
• Re: SATA status reports update
  • From: Robert Hancock
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Jens Axboe
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Alan Cox
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Jens Axboe
• Re: [PATCH 2/2] [PATCH] ahci: honor PORTS_IMPL on ICH8s
  • From: Robin H. Johnson
• Re: [PATCH] libata: skip reset on bus not a device
  • From: Tejun Heo
• [PATCH 2/2] [PATCH] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• [PATCH 1/2] ahci: preserve PORTS_IMPL over host resets
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: cosmetic changes to constants
  • From: Jeff Garzik
• Patch add SiS966 Sata support
  • From: Uwe Koziolek
• [PATCH 1/2] libata: cosmetic changes to constants
  • From: Tejun Heo
• [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Tejun Heo
• Re: [PATCHSET] libata: implement presence detection using polling IDENTIFY for ata_piix
  • From: Alessandro Bono
• [PATCH] libata: make user scan wait for scan to complete
  • From: Tejun Heo
• Re: [PATCHSET] libata: implement presence detection using polling IDENTIFY for ata_piix
  • From: Alessandro Bono
• Re: SATA status reports update
  • From: Prakash Punnoor
• [PATCHSET] libata: implement presence detection using polling IDENTIFY for ata_piix
  • From: Tejun Heo
• [PATCH 6/6] ata_piix: strip now unneded MAP related stuff
  • From: Tejun Heo
• [PATCH 2/6] libata: unexport ata_dev_revalidate()
  • From: Tejun Heo
• [PATCH 1/6] ata_piix: clean up port flags
  • From: Tejun Heo
• [PATCH 5/6] ata_piix: apply device detection via polling IDENTIFY
  • From: Tejun Heo
• [PATCH 3/6] libata: convert @post_reset to @flags in ata_dev_read_id()
  • From: Tejun Heo
• [PATCH 4/6] libata: implement presence detection via polling IDENTIFY
  • From: Tejun Heo
• [PATCH] libata: skip reset on bus not a device
  • From: Joe Jin
• Re: [patch 2/2] libata: _SDD support
  • From: Kristen Carlson Accardi
• 2.6.18-mm2 - oops with HPT302 with libata PATA
  • From: John Stoffel
• Re: SATA status reports update
  • From: John Stoffel
• Re: SATA status reports update
  • From: Alan Cox
• Re: [patch 2/2] libata: _SDD support
  • From: Valdis . Kletnieks
• [patch] 2.6.18: Initialize the SWARM IDE driver
  • From: Maciej W. Rozycki
• Re: SATA status reports update
  • From: John Stoffel
• Re: [patch 1/2] libata: _GTF support
  • From: Kristen Carlson Accardi
• Re: SATA status reports update
  • From: Jeff Garzik
• Re: SATA status reports update
  • From: Prakash Punnoor
• Re: SATA status reports update
  • From: Jeff Garzik
• Re: SATA status reports update
  • From: Prakash Punnoor
• SATA status reports update
  • From: Jeff Garzik
• [PATCH] libata: skip nodevice bus on execute reset
  • From: Joe Jin
• Re: [PATCH] too late: updated version of the ACPI patches
  • From: Hannes Reinecke
• [PATCH 5/5] libata: PCI ID table cleanups
  • From: Jeff Garzik
• [PATCH 3/5] libata: init probe_ent->private_data in a common loc
  • From: Jeff Garzik
• [PATCH 4/5] libata: Print out Status register
  • From: Jeff Garzik
• [PATCH 2/5] libata: minor PCI IDE probe fixes and cleanups
  • From: Jeff Garzik
• Re: [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: Tejun Heo
• [PATCH 1/5] libata: Use new PCI_VDEVICE() macro
  • From: Jeff Garzik
• [PATCH 0/5] libata: various queued changes
  • From: Jeff Garzik
• Re: Bad write performance with libata-tj-stable-2.6.17.4-20060710, pcmcia based sata_sil24, PMP, and NCQ drive
  • From: Derek Taubert
• Re: [PATCH REPOST] libata: lengthen interval between SRST set and clear
  • From: Eric D. Mudama
• [patch 0/2] Return of the ACPI Patches (the sequel)
  • From: Kristen Carlson Accardi
• [patch 2/2] libata: _SDD support
  • From: Kristen Carlson Accardi
• [patch 1/2] libata: _GTF support
  • From: Kristen Carlson Accardi
• Re: [PATCH] too late: updated version of the ACPI patches
  • From: Kristen Carlson Accardi
• Re: How to activate pata support of ata_piix in vanilla 2.6.18?
  • From: Jeff Garzik
• How to activate pata support of ata_piix in vanilla 2.6.18?
  • From: Elias Oltmanns
• Re: Adaptec Unknown device 0241 (rev01): Serial ATA II RAID 1420SA
  • From: Jeff Garzik
• Re: [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: Alan Cox
• Re: [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: Jeff Garzik
• Adaptec Unknown device 0241 (rev01): Serial ATA II RAID 1420SA
  • From: Fortier,Vincent [Montreal]
• [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: Tejun Heo
• Re: big delay on boot with new pata drivers
  • From: Albert Lee
• Re: [PATCH REPOST] libata: lengthen interval between SRST set and clear
  • From: Jeff Garzik
• Re: [PATCH REPOST] libata: lengthen interval between SRST set and clear
  • From: Tejun Heo
• Re: [PATCH REPOST] libata: lengthen interval between SRST set and clear
  • From: Jeff Garzik
• [PATCH REPOST] libata: lengthen interval between SRST set and clear
  • From: Tejun Heo
• Re: [PATCH] libata: lengthen interval between SRST set and clear
  • From: justin
• [PATCH] sata_nv: SRST sometimes fails after hotplug, use HRST_TO_RESUME
  • From: Tejun Heo
• [PATCH] ahci: replace SKIP_D2H_BSY with HRST_TO_RESUME
  • From: Tejun Heo
• [PATCH] too late: updated version of the ACPI patches
  • From: Hannes Reinecke
• Re: [PATCH] libata: lengthen interval between SRST set and clear
  • From: Jim Paris
• Re: smartctl causing HSM violation on sata_nv, 2.6.18
  • From: Jim Paris
• Re: [PATCH] libata: lengthen interval between SRST set and clear
  • From: Tejun Heo
• Re: smartctl causing HSM violation on sata_nv, 2.6.18
  • From: Tejun Heo
• Re: [PATCH] libata: lengthen interval between SRST set and clear
  • From: Jim Paris
• [PATCH] libata: lengthen interval between SRST set and clear
  • From: Tejun Heo
• Re: [patch] libata: return sense data in HDIO_DRIVE_CMD ioctl
  • From: Tejun Heo
• Re: [patch 2/2] libata: _SDD support
  • From: Jeff Garzik