Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/libata-core.c | 6 +++++-
drivers/ata/libata-scsi.c | 46 +++++++++++++++++++++++++++++++++++++-------
drivers/ata/pata_qdi.c | 2 +-
drivers/ata/sata_promise.c | 1 +
4 files changed, 46 insertions(+), 9 deletions(-)
Alan Cox:
libata: Don't believe bogus claims in the older PIO mode register
Eran Tromer:
libata: return sense data in HDIO_DRIVE_CMD ioctl
Jeff Garzik:
[libata] sata_promise: add PCI ID
Peter Korsgaard:
pata-qdi: fix le32 in data_xfer
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 77138a3..83728a9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -870,7 +870,11 @@ static unsigned int ata_id_xfermask(cons
* the PIO timing number for the maximum. Turn it into
* a mask.
*/
- pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+ u8 mode = id[ATA_ID_OLD_PIO_MODES] & 0xFF;
+ if (mode < 5) /* Valid PIO range */
+ pio_mask = (2 << mode) - 1;
+ else
+ pio_mask = 1;
/* But wait.. there's more. Design your standards by
* committee and you too can get a free iordy field to
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b0d0cc4..7af2a4b 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -164,10 +164,10 @@ int ata_cmd_ioctl(struct scsi_device *sc
{
int rc = 0;
u8 scsi_cmd[MAX_COMMAND_SIZE];
- u8 args[4], *argbuf = NULL;
+ u8 args[4], *argbuf = NULL, *sensebuf = NULL;
int argsize = 0;
- struct scsi_sense_hdr sshdr;
enum dma_data_direction data_dir;
+ int cmd_result;
if (arg == NULL)
return -EINVAL;
@@ -175,6 +175,10 @@ int ata_cmd_ioctl(struct scsi_device *sc
if (copy_from_user(args, arg, sizeof(args)))
return -EFAULT;
+ sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sensebuf)
+ return -ENOMEM;
+
memset(scsi_cmd, 0, sizeof(scsi_cmd));
if (args[3]) {
@@ -191,7 +195,7 @@ int ata_cmd_ioctl(struct scsi_device *sc
data_dir = DMA_FROM_DEVICE;
} else {
scsi_cmd[1] = (3 << 1); /* Non-data */
- /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
data_dir = DMA_NONE;
}
@@ -210,18 +214,46 @@ int ata_cmd_ioctl(struct scsi_device *sc
/* Good values for timeout and retries? Values below
from scsi_ioctl_send_command() for default case... */
- if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize,
- &sshdr, (10*HZ), 5)) {
+ cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize,
+ sensebuf, (10*HZ), 5, 0);
+
+ if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+ u8 *desc = sensebuf + 8;
+ cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+ /* If we set cc then ATA pass-through will cause a
+ * check condition even if no error. Filter that. */
+ if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+ struct scsi_sense_hdr sshdr;
+ scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (sshdr.sense_key==0 &&
+ sshdr.asc==0 && sshdr.ascq==0)
+ cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+ }
+
+ /* Send userspace a few ATA registers (same as drivers/ide) */
+ if (sensebuf[0] == 0x72 && /* format is "descriptor" */
+ desc[0] == 0x09 ) { /* code is "ATA Descriptor" */
+ args[0] = desc[13]; /* status */
+ args[1] = desc[3]; /* error */
+ args[2] = desc[5]; /* sector count (0:7) */
+ if (copy_to_user(arg, args, sizeof(args)))
+ rc = -EFAULT;
+ }
+ }
+
+
+ if (cmd_result) {
rc = -EIO;
goto error;
}
- /* Need code to retrieve data from check condition? */
-
if ((argbuf)
&& copy_to_user(arg + sizeof(args), argbuf, argsize))
rc = -EFAULT;
error:
+ kfree(sensebuf);
kfree(argbuf);
return rc;
}
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 7977f47..2c3cc0c 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -141,7 +141,7 @@ static void qdi_data_xfer(struct ata_dev
memcpy(&pad, buf + buflen - slop, slop);
outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
} else {
- pad = cpu_to_le16(inl(ap->ioaddr.data_addr));
+ pad = cpu_to_le32(inl(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
}
}
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 8bcdfa6..72eda51 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -260,6 +260,7 @@ static const struct pci_device_id pdc_at
#if 0
{ PCI_VDEVICE(PROMISE, 0x3570), board_20771 },
#endif
+ { PCI_VDEVICE(PROMISE, 0x3577), board_20771 },
{ } /* terminate list */
};
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
