Changes:
* On sata_mv machines with a certain hardware errata, the errata
workaround was broken. Apply the obvious fix.
* Get PATA working properly on ICH7M. Documentation malfunction.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/scsi/ata_piix.c | 36 ++++++++++++++++++++++++++++++++++--
drivers/scsi/sata_mv.c | 3 +--
2 files changed, 35 insertions(+), 4 deletions(-)
Andres Salomon:
[libata] sata_mv: errata check buglet fix
Tejun Heo:
ata_piix: add map 01b for ICH7M
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 2d20caf..a9bb3cb 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -123,7 +123,8 @@ enum {
ich6_sata = 4,
ich6_sata_ahci = 5,
ich6m_sata_ahci = 6,
- ich8_sata_ahci = 7,
+ ich7m_sata_ahci = 7,
+ ich8_sata_ahci = 8,
/* constants for mapping table */
P0 = 0, /* port 0 */
@@ -188,7 +189,7 @@ #endif
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
- { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci },
/* Enterprise Southbridge 2 (where's the datasheet?) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* SATA Controller 1 IDE (ICH8, no datasheet yet) */
@@ -336,6 +337,24 @@ static const struct piix_map_db ich6m_ma
},
};
+static const struct piix_map_db ich7m_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x5,
+ .present_shift = 4,
+
+ /* Map 01b isn't specified in the doc but some notebooks use
+ * it anyway. ATM, the only case spotted carries subsystem ID
+ * 1025:0107. This is the only difference from ich6m.
+ */
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, P2, RV, RV }, /* 00b */
+ { IDE, IDE, P1, P3 }, /* 01b */
+ { P0, P2, IDE, IDE }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
static const struct piix_map_db ich8_map_db = {
.mask = 0x3,
.port_enable = 0x3,
@@ -355,6 +374,7 @@ static const struct piix_map_db *piix_ma
[ich6_sata] = &ich6_map_db,
[ich6_sata_ahci] = &ich6_map_db,
[ich6m_sata_ahci] = &ich6m_map_db,
+ [ich7m_sata_ahci] = &ich7m_map_db,
[ich8_sata_ahci] = &ich8_map_db,
};
@@ -444,6 +464,18 @@ #endif
.port_ops = &piix_sata_ops,
},
+ /* ich7m_sata_ahci */
+ {
+ .sht = &piix_sht,
+ .host_flags = ATA_FLAG_SATA |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ PIIX_FLAG_AHCI,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &piix_sata_ops,
+ },
+
/* ich8_sata_ahci */
{
.sht = &piix_sht,
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 1053c7c..fa38a41 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -1961,8 +1961,7 @@ comreset_retry:
timeout = jiffies + msecs_to_jiffies(200);
do {
sata_scr_read(ap, SCR_STATUS, &sstatus);
- sstatus &= 0x3;
- if ((sstatus == 3) || (sstatus == 0))
+ if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
break;
__msleep(1, can_sleep);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
