Linux IDE
[Prev Page][Next Page]
- Re: Polling (was Re: [PATCHSET 2/2] implement PMP support, take 6), (continued)
- [PATCHSET 1/2] libata: prep for PMP support, take 6,
Tejun Heo
- [PATCH 02/12] libata-pmp-prep: add PMP related constants, fields, ops and update helpers,
Tejun Heo
- [PATCH 03/12] libata-pmp-prep: add @new_class to ata_dev_revalidate(),
Tejun Heo
- [PATCH 04/12] libata-pmp-prep: make a number of functions global to libata,
Tejun Heo
- [PATCH 01/12] libata: misc updates for AN,
Tejun Heo
- [PATCH 07/12] libata-pmp-prep: implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMB,
Tejun Heo
- [PATCH 05/12] libata-pmp-prep: implement ops->qc_defer(),
Tejun Heo
- [PATCH 08/12] libata-pmp-prep: implement ATA_LFLAG_NO_RETRY,
Tejun Heo
- [PATCH 11/12] libata-pmp-prep: implement ATA_HORKAGE_SKIP_PM,
Tejun Heo
- [PATCH 12/12] libata-pmp-prep: implement sata_async_notification(),
Tejun Heo
- [PATCH 09/12] libata-pmp-prep: implement ATA_LFLAG_DISABLED,
Tejun Heo
- [PATCH 10/12] libata-pmp-prep: implement EH fast-fail path,
Tejun Heo
- [PATCH 06/12] libata-pmp-prep: implement qc_defer helpers,
Tejun Heo
- [PATCH #upstream-fixes,#upstream] sata_sil24: fix IRQ clearing race when PCIX_IRQ_WOC is used,
Tejun Heo
- [PATCH] libata: clean up R/W recovery mode page,
Jeff Garzik
- [PATCH] libata: improve FORMAT UNIT; minor code cleanups,
Jeff Garzik
- [PATCH] libata: simple TEST UNIT READY simulation,
Jeff Garzik
- [PATCH #upstream] libata: fix ata_set_max_sectors(),
Tejun Heo
- Re: sata_sil24 with port multiplier,
Tejun Heo
- [PATCH] libata: slightly improved req-sense, send-diag no-ops,
Jeff Garzik
- [PATCH] libata: translate INQUIRY VPD page 89h (ATA info),
Jeff Garzik
- [PATCH] sata_via: kill SATA_PATA_SHARING register handling,
Tejun Heo
- [PATCH] pata_sis: add missing UDMA5 timing value in sis_66_set_dmamode(),
Tejun Heo
- [PATCH] ahci: Add MCP79 support to AHCI driver,
Peer Chen
- [PATCH] ahci: enable GHC.AE bit before set GHC.HR,
Peer Chen
- [PATCH] ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: remove ->ide_dma_check (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: use only ->set_pio_mode method for programming PIO modes (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: move ide_rate_filter() calls to the upper layer (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] hpt37x updates for comment,
Alan Cox
- [PATCH] libata: Add a horkage entry for DRQ mishandling (atapi tapes),
Alan Cox
- [PATCH] libata: Update the blacklist with a few more devices,
Alan Cox
- [PATCH] ide-cd is unmaintained,
Alan Cox
- [PATCH] pdc2027x: Switch properly to ioread/iowrite,
Alan Cox
- [PATCH] pata_acpi: Use ata_sff_port_start,
Alan Cox
- [PATCH] libata-sff: Fix documentation,
Alan Cox
- [PATCH] libata: Set transfer sizes properly for ATAPI,
Alan Cox
- [PATCH] libata: Update experimental tags to reflect reality better,
Alan Cox
- 2.6.23-rc6-mm1: Build failure on ppc64 drivers/ata/pata_scc.c,
Mel Gorman
- DMA and block mode,
Kantor Zsolt
- [PATCH v3] [POWERPC] Fix build errors when BLOCK=n,
Emil Medve
- sata_via: bit SATA_2DEV of SATA_PATA_SHARING register,
Tejun Heo
- [PATCH 1/3] ide: add ide_find_port() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 3/3] ide: add CONFIG_IDE_ARCH_OBSOLETE_INIT,
Bartlomiej Zolnierkiewicz
- [PATCH 2/3] ide: remove redundant comments from ide.h,
Bartlomiej Zolnierkiewicz
- [PATCH] MAINTAINERS: mark ide-scsi as Orphan,
Bartlomiej Zolnierkiewicz
- [PATCH v2] [POWERPC] Fix build errors when BLOCK=n,
Emil Medve
- Improper disk shutdown with 2.6.22.6?,
Robert
- [PATCH ver2 1/2] libata-scsi: Remove !use_sg code paths,
Boaz Harrosh
- [PATCH ver2 2/2] libata-scsi: convert to use the data buffer accessors,
Boaz Harrosh
- [no subject],
melnik-inna
- [PATCH] [POWERPC] Fix build errors when BLOCK=n,
Emil Medve
- [PATCH 6/6] ide: add ide_device_add(),
Bartlomiej Zolnierkiewicz
- [PATCH 5/6] ide: add ->fixup method to ide_hwif_t,
Bartlomiej Zolnierkiewicz
- [PATCH 4/6] siimage: separate PATA and SATA methods,
Bartlomiej Zolnierkiewicz
- [PATCH 3/6] aec62xx: remove aec62xx_dma_lost_irq(),
Bartlomiej Zolnierkiewicz
- [PATCH 2/6] alim15x3: use ->host_flags and ->udma_mask fields from ide_pci_device_t,
Bartlomiej Zolnierkiewicz
- [PATCH 1/6] alim15x3: fix CD_ROM DMA and PIO FIFO settings setup,
Bartlomiej Zolnierkiewicz
- [patch] Add device IDs for supporting ATI/AMD SB800 SATA controller,
su henry
- Spin down warning message Debian/lenny,
ROQUE Damien - FIP 1A
- 2.6.22.6 sata_sil device errors & timeouts,
Andrew Paprocki
- Re: [PATCH 1/1] pata_it821x: fix lost interrupt with atapi devices,
Tejun Heo
- Problems with Promise controller or Seagate 500g ST3500630AS ?,
Glen Larkins
- [PATCH] [POWERPC] Remove unused variabls from drivers/ide/ppc/pmac.c,
Stephen Rothwell
- [PATCH] add Hitachi Travelstar 7k200 to the NCQ blacklist,
Tobias Oetiker
- Add Hitachi HTS722020K9A300 to ncq blacklist,
Philip Langdale
- [PATCH] ide: call udma_filter() before resorting to the UltraDMA mask,
Sergei Shtylyov
- Fw: Spurious completions during NCQ,
Andrew Morton
- [PATCH] libata: Integrate ACPI-based PATA/SATA hotplug,
Matthew Garrett
- SG_IO and HDIO_DRIVE_TASKFILE issue,
Kantor Zsolt
- [PATCH #upstream-fixes] libata: add ST9120822AS 3.CLF to NONCQ blacklist,
Tejun Heo
- [PATCH]libata-acpi: add ACPI _PSx method,
Shaohua Li
- HDIO_DRIVE_TASKFILE not supported in libata ?,
Kantor Zsolt
- 2.6.23-rc6: pata_ali cdrom doesn't work,
Vegard Lima
- some ide cd-rom dma broken on older intel chipsets,
Michal Suchanek
- sata_nv issues with MCP51 SATA controller,
Jon Ivar Rykkelid
- [PATCH] Blacklist NCQ for WDC1600BEVS-22RST0,
Maurizio Monge
- [PATCH 10/10] ide: add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flags,
Bartlomiej Zolnierkiewicz
- [PATCH 9/10] ide: add IDE_HFLAG_RQSIZE_256 host flag,
Bartlomiej Zolnierkiewicz
- [PATCH 8/10] ide: add IDE_HFLAG_FORCE_LEGACY_IRQS host flag,
Bartlomiej Zolnierkiewicz
- [PATCH 7/10] ide: add ->chipset field to ide_pci_device_t,
Bartlomiej Zolnierkiewicz
- [PATCH 6/10] ide: remove unused ->next field from ide_pci_device_t,
Bartlomiej Zolnierkiewicz
- [PATCH 5/10] ide: add hwif_register_devices() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 4/10] serverworks: remove dead code from svwks_set_dma_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 3/10] rz1000: set serialized flag only if mate interface exists,
Bartlomiej Zolnierkiewicz
- [PATCH 2/10] ide: fix disabled ports reporting for PCI controllers,
Bartlomiej Zolnierkiewicz
- [PATCH 1/10] cmd64x: always set hwif->chipset for CMD646,
Bartlomiej Zolnierkiewicz
- ata_piix, laptop cdrom, ICH7: EH, limiting speed to PIO,
Sergey Dolgov
- [git patches] IDE fixes for 2.6.23-rc6,
Bartlomiej Zolnierkiewicz
- [PATCH 26/27] blk_end_request: changing ide-cd (take 2),
Kiyoshi Ueda
- [PATCH 27/27] blk_end_request: remove/unexport end_that_request_* (take 2),
Kiyoshi Ueda
- [PATCH 25/27] blk_end_request: changing ide normal caller (take 2),
Kiyoshi Ueda
- [PATCH 23/27] blk_end_request: changing cciss (take 2),
Kiyoshi Ueda
- [PATCH 24/27] blk_end_request: changing cpqarray (take 2),
Kiyoshi Ueda
- [PATCH 22/27] blk_end_request: changing xsysace (take 2),
Kiyoshi Ueda
- [PATCH 21/27] blk_end_request: changing ide-scsi (take 2),
Kiyoshi Ueda
- [PATCH 20/27] blk_end_request: changing scsi (take 2),
Kiyoshi Ueda
- [PATCH 19/27] blk_end_request: changing s390 (take 2),
Kiyoshi Ueda
- [PATCH 18/27] blk_end_request: changing mmc (take 2),
Kiyoshi Ueda
- [PATCH 17/27] blk_end_request: changing i2o_block (take 2),
Kiyoshi Ueda
- [PATCH 16/27] blk_end_request: changing viocd (take 2),
Kiyoshi Ueda
- [PATCH 15/27] blk_end_request: changing xen-blkfront (take 2),
Kiyoshi Ueda
- [PATCH 14/27] blk_end_request: changing viodasd (take 2),
Kiyoshi Ueda
- [PATCH 13/27] blk_end_request: changing ub (take 2),
Kiyoshi Ueda
- [PATCH 12/27] blk_end_request: changing sx8 (take 2),
Kiyoshi Ueda
- [PATCH 11/27] blk_end_request: changing sunvdc (take 2),
Kiyoshi Ueda
- [PATCH 10/27] blk_end_request: changing ps3disk (take 2),
Kiyoshi Ueda
- [PATCH 09/27] blk_end_request: changing nbd (take 2),
Kiyoshi Ueda
- [PATCH 08/27] blk_end_request: changing lguest (take 2),
Kiyoshi Ueda
- [PATCH 07/27] blk_end_request: changing floppy (take 2),
Kiyoshi Ueda
- [PATCH 06/27] blk_end_request: changing DAC960 (take 2),
Kiyoshi Ueda
- [PATCH 05/27] blk_end_request: changing um (take 2),
Kiyoshi Ueda
- [PATCH 04/27] blk_end_request: changing arm (take 2),
Kiyoshi Ueda
- [PATCH 01/27] blk_end_request: add new request completion interface (take 2),
Kiyoshi Ueda
- [PATCH 03/27] blk_end_request: changing block layer core (take 2),
Kiyoshi Ueda
- [PATCH 02/27] blk_end_request: add blk_rq_size() functions (take 2),
Kiyoshi Ueda
- [PATCH 00/27] blk_end_request: full I/O completion handler (take 2),
Kiyoshi Ueda
- [patch] ata: increase allowed config flags,
Kristen Carlson Accardi
- Re:,
Tejun Heo
- Maintainer change,
Alan Cox
- [-mm patch] remove ide_get_error_location(),
Adrian Bunk
- USB and smartmontools,
Janne Kario
- Maxtor 6L200M0 sata irq timeouts,
Michal Suchanek
[1/2] 2.6.23-rc5: known regressions with patches v2,
Michal Piotrowski
Re: sata & scsi suggestion for make menuconfig,
Stefan Richter
[PATCH 2.6.23-rc5] ata_piix: replace spaces with tabs,
Jason Gaston
drivers/ata/ahci.c driver questions / recommendations,
Adrian B. Weissman
[PATCH] Remove sync waiting code from libata,
Matthew Wilcox
Re: [PATCH] ahci.c: fix ati sb600 sata IRQ_TF_ERR,
Tejun Heo
Re: Bug#419482: Kernel 2.6.18 - ALI15X3 driver too optmistic about UDMA,
Steve McIntyre
[PATCH] Asynchronous scan support for libata,
Matthew Wilcox
CF as IDE with pata_via or VIA_IDE fails on lexar CF,
Paul Wouters
no data with HDIO_DRIVE_TASK,
Kantor Zsolt
[PATCH 8/13] alim15x3: always tune PIO,
Bartlomiej Zolnierkiewicz
[PATCH 13/13] ide: set drive->autotune in ide_pci_setup_ports(),
Bartlomiej Zolnierkiewicz
[PATCH 12/13] triflex: always tune PIO,
Bartlomiej Zolnierkiewicz
[PATCH 11/13] opti621: always tune PIO,
Bartlomiej Zolnierkiewicz
[PATCH 10/13] cy82c693: always tune PIO,
Bartlomiej Zolnierkiewicz
[PATCH 9/13] cs5520: always tune PIO,
Bartlomiej Zolnierkiewicz
[PATCH 7/13] ide: add IDE_HFLAG_LEGACY_IRQS host flag,
Bartlomiej Zolnierkiewicz
[PATCH 6/13] ide: add IDE_HFLAG_SERIALIZE host flag,
Bartlomiej Zolnierkiewicz
[PATCH 5/13] ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flag,
Bartlomiej Zolnierkiewicz
[PATCH 4/13] piix: add DECLARE_ICH_DEV() macro,
Bartlomiej Zolnierkiewicz
[PATCH 3/13] pdc202xx_old: add DECLARE_PDC2026X_DEV() macro,
Bartlomiej Zolnierkiewicz
[PATCH 2/13] pdc202xx_new: add DECLARE_PDCNEW_DEV() macro,
Bartlomiej Zolnierkiewicz
[PATCH 1/13] aec62xx: no need to disable UDMA in ->init_hwif method for ATP850UF,
Bartlomiej Zolnierkiewicz
[PATCH] via82cxxx: add Arima W730-K8 and other rebadgings to short cables list,
Bartlomiej Zolnierkiewicz
Re: [sata_nv] timeout waiting for ADMA IDLE, stat=0x440,
Andrew Morton
Re: MDADM restart at system boot time,
Richard Scobie
CF-Card DMA problem,
Steffen D.
ICH Intel PATA short cable override...,
Daniel J Blueman
pata_pdc202xx_old bug? (ATA bus error),
n
a disk timeout and a disk state,
Raz
Re: [Bugme-new] [Bug 8976] New: Regression (ata_piix): Kernel panic during driver initialization,
Andrew Morton
pata_via cd/dvd timeout problems,
richard kennedy
HSM violation on bootup, ICH7 + ata_piix 2.6.22,
Eamonn Hamilton
Re: [2/2] 2.6.23-rc5: known regressions with patches,
Michal Piotrowski
[1/2] 2.6.23-rc5: known regressions with patches,
Michal Piotrowski
[PATCH 1/3] libata: move ata_id_n_sectors() upward,
Tejun Heo
[PATCH #upstream-fixes]: libata clear horkage on ata_dev_init(),
Tejun Heo
HSM violation with ahci+WDC WD1600BEVS-22RST0,
Maurizio Monge
[no subject],
Kantor Zsolt
[PATCH 2/4] hpt366: MWDMA filter for SATA cards,
Sergei Shtylyov
[PATCH 3/4] ide: make ide_rate_filter() also respect PIO and SW/MW DMA mode masks (take 2),
Sergei Shtylyov
[PATCH 3/4] ide: make ide_rate_filter() also respect PIO and SW/MW DMA mode masks,
Sergei Shtylyov
Read Prefetch, Post Write on IDE chipsets,
Matt Sealey
CF as IDE on ICH6M using libata,
Eddie Hung
Re: CF as IDE on ICH6M using libata,
Alan Cox
[git patches] libata critical fixes,
Jeff Garzik
libata / pata drivers and smart , pata_via . pata_pdc202xx_old,
n
sata_promise: port is slow to respond, reset failed,
Peter Favrholdt
libata equivalent for hdX=remap63,
Alexander E. Patrakov
Re: 2.6.23-rc4-mm1,
Andrew Morton
[PATCH] drivers/firmware: const-ify DMI API and internals,
Jeff Garzik
ATA_PIIX - soft resetting port, port is slow to respond, machine "freezes" for a few seconds,
Tomasz Chmielewski
[PATCH] ata_piix: use more-robust form of array init,
Jeff Garzik
[APPENDIX PATCH 5/5] blk_end_request: userspace multipath-tools for request-based dm,
Kiyoshi Ueda
[PATCH 1/7] blk_end_request: add new request completion interface,
Kiyoshi Ueda
[APPENDIX PATCH 4/5] blk_end_request: userspace device-mapper for request-based dm,
Kiyoshi Ueda
[APPENDIX PATCH 3/5] blk_end_request: dynamic load balancing for request-based dm-multipath,
Kiyoshi Ueda
[APPENDIX PATCH 2/5] blk_end_request: request-based dm-multipath,
Kiyoshi Ueda
[APPENDIX PATCH 1/5] blk_end_request: request-based dm core,
Kiyoshi Ueda
[PATCH 7/7] blk_end_request: change rq->end_io to cover request completion as a whole,
Kiyoshi Ueda
[PATCH 6/7] blk_end_request: remove/unexport end_that_request_*,
Kiyoshi Ueda
[PATCH 5/7] blk_end_request: change ide-cd (cdrom_newpc_intr),
Kiyoshi Ueda
[PATCH 4/7] blk_end_request: cciss/cpqarray/xsysace change,
Kiyoshi Ueda
[PATCH 3/7] blk_end_request: changing "normal" drivers,
Kiyoshi Ueda
[PATCH 2/7] blk_end_request: add blk_rq_size() macros,
Kiyoshi Ueda
[PATCH 0/7] blk_end_request: full I/O completion handler,
Kiyoshi Ueda
shut down msg,
Bruno Buys
[PATCH 2.6.23-rc4][reRESEND] ata_piix: IDE mode SATA patch for Intel Tolapai,
Jason Gaston
[PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai,
Jason Gaston
[PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai,
Jason Gaston
[PATCH 2.6.23-rc4][RESEND] ata_piix: IDE mode SATA patch for Intel Tolapai,
Jason Gaston
[PATCH 2.6.23-rc4] ata_piix: IDE mode SATA patch for Intel Tolapai,
Jason Gaston
[PATCH 2.6.23-rc4] ahci: RAID mode SATA patch for Intel Tolapai,
Jason Gaston
hard drive ioctl's,
Kantor Zsolt
Port Multiplier Patch 2.6.22.1 on Alpha,
Tom Evans
ATAPI tape drives broken with libata,
Chuck Ebbert
[PATCH 10/10] ide: remove .init_setup from ide_pci_device_t,
Bartlomiej Zolnierkiewicz
[PATCH 9/10] serverworks: remove ->init_setup,
Bartlomiej Zolnierkiewicz
[PATCH 8/10] scc_pata: remove ->init_setup,
Bartlomiej Zolnierkiewicz
[PATCH 7/10] pdc202xx_old: remove ->init_setup,
Bartlomiej Zolnierkiewicz
[PATCH 5/10] hpt366: remove ->init_setup,
Bartlomiej Zolnierkiewicz
[PATCH 6/10] pdc202xx_new: remove ->init_setup,
Bartlomiej Zolnierkiewicz
[PATCH 4/10] cmd64x: remove ->init_setup,
Bartlomiej Zolnierkiewicz
[PATCH 3/10] aec62xx: remove ->init_setup,
Bartlomiej Zolnierkiewicz
[PATCH 2/10] ide: use I/O ops directly part #2,
Bartlomiej Zolnierkiewicz
[PATCH 1/10] ide: use pci_dev->revision,
Bartlomiej Zolnierkiewicz
HSM violation spew.,
Dave Jones
hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error },
John Sigler
Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error },
Sergei Shtylyov
Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error },
Sergei Shtylyov
[1/2] 2.6.23-rc3: known regressions with patches,
Michal Piotrowski
[PATCH 2.6.23-rc4] sata_promise: FastTrack TX4200 is a second-generation chip,
Mikael Pettersson
[PATCH #upstream-fixes] libata: implement BROKEN_HPA horkage and apply it to affected drives,
Tejun Heo
sata_nv; port responding too slow,
Jan Engelhardt
[-mm patch] unexport noautodma,
Adrian Bunk
[PATCH 10/8] ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t,
Bartlomiej Zolnierkiewicz
[PATCH 9/8] pdc202xx_old: remove broken SWDMA support,
Bartlomiej Zolnierkiewicz
[PATCH 8/8] ata: add ATA_MWDMA* and ATA_SWDMA* defines,
Bartlomiej Zolnierkiewicz
[PATCH 3/8] ide: add IDE_HFLAG_NO_ATAPI_DMA host flag,
Bartlomiej Zolnierkiewicz
[PATCH 5/8] ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flags,
Bartlomiej Zolnierkiewicz
[PATCH 6/8] ide: remove ->init_setup_dma from ide_pci_device_t,
Bartlomiej Zolnierkiewicz
[PATCH 7/8] ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags,
Bartlomiej Zolnierkiewicz
[PATCH 4/8] ide: add IDE_HFLAG_BOOTABLE host flag,
Bartlomiej Zolnierkiewicz
[PATCH 2/8] amd74xx: remove /proc/ide/amd74xx,
Bartlomiej Zolnierkiewicz
[PATCH 1/8] amd74xx/via82cxxx: don't initialize drive->dn,
Bartlomiej Zolnierkiewicz
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
