Corrected. With only 1 of the 500g drives connected, I can boot fine. With all drives connected, I suddenly began getting COMRESET failed (errno=-16) and hearing physical noises from the two 80g drives connected to the motherboard sata. This has never occurred. On 9/17/07, Tejun Heo <htejun@xxxxxxxxx> wrote: > Glen Larkins wrote: > > I'm currently running under Edgy and kernel 2.6.17-10, and I'm still > > getting timeouts just during the boot process. I've included my > > current dmesg, though its a bit lengthy. This particular boot has 3 of > > the 4 500g drives disconnected. > > Please report kernel log including boot messages and error messages from > vanilla 2.6.22.6. > > Thanks. > > -- > tejun >
[ 0.000000] Linux version 2.6.22.6 (root@arcade) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 SMP Mon Sep 17 20:14:42 CDT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a800 (usable) [ 0.000000] BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5b50 [ 0.000000] Entering add_active_range(0, 0, 393200) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 393200 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 393200 [ 0.000000] On node 0 totalpages: 393200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1279 pages used for memmap [ 0.000000] HighMem zone: 162545 pages, LIFO batch:31 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP 000F7580, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 5FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 5FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 5FFF30C0, 4E50 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 5FFF0000, 0040 [ 0.000000] ACPI: APIC 5FFF7F40, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) [ 0.000000] Built 1 zonelists. Total pages: 390129 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1908.871 MHz processor. [ 23.745795] Console: colour VGA+ 80x25 [ 23.746378] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 23.746872] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 23.803068] Memory: 1512504k/1572800k available (2060k kernel code, 59064k reserved, 917k data, 364k init, 655296k highmem) [ 23.803080] virtual kernel memory layout: [ 23.803081] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 23.803082] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 23.803084] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 23.803085] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 23.803087] .init : 0xc03ef000 - 0xc044a000 ( 364 kB) [ 23.803088] .data : 0xc03030da - 0xc03e86e4 ( 917 kB) [ 23.803089] .text : 0xc0100000 - 0xc03030da (2060 kB) [ 23.803093] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 23.863162] Calibrating delay using timer specific routine.. 3819.29 BogoMIPS (lpj=1909647) [ 23.863205] Security Framework v1.0.0 initialized [ 23.863213] SELinux: Disabled at boot. [ 23.863229] Mount-cache hash table entries: 512 [ 23.863392] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 23.863402] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 23.863405] CPU: L2 Cache: 512K (64 bytes/line) [ 23.863408] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 23.863418] Compat vDSO mapped to ffffe000. [ 23.863433] Checking 'hlt' instruction... OK. [ 23.867313] SMP alternatives: switching to UP code [ 23.867601] Freeing SMP alternatives: 11k freed [ 23.867836] ACPI: Core revision 20070126 [ 23.871193] CPU0: AMD Athlon(tm) XP 2600+ stepping 00 [ 23.871217] Total of 1 processors activated (3819.29 BogoMIPS). [ 23.871413] ENABLING IO-APIC IRQs [ 23.871605] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 23.983113] Brought up 1 CPUs [ 23.983196] PM: Adding info for No Bus:platform [ 23.983252] Booting paravirtualized kernel on bare hardware [ 23.983323] Time: 2:40:26 Date: 08/18/107 [ 23.983360] NET: Registered protocol family 16 [ 23.983403] PM: Adding info for No Bus:vtcon0 [ 23.983482] EISA bus registered [ 23.983495] ACPI: bus type pci registered [ 24.015526] PCI: PCI BIOS revision 2.10 entry at 0xfbe50, last bus=2 [ 24.015528] PCI: Using configuration type 1 [ 24.015530] Setting up standard PCI resources [ 24.026064] ACPI: Interpreter enabled [ 24.026068] ACPI: (supports S0 S1 S4 S5) [ 24.026085] ACPI: Using IOAPIC for interrupt routing [ 24.026160] PM: Adding info for acpi:acpi_system:00 [ 24.026206] PM: Adding info for acpi:button_power:00 [ 24.026250] PM: Adding info for acpi:ACPI0007:00 [ 24.026304] PM: Adding info for acpi:device:00 [ 24.026351] PM: Adding info for acpi:PNP0C02:00 [ 24.026396] PM: Adding info for acpi:PNP0C02:01 [ 24.026515] PM: Adding info for acpi:PNP0C0C:00 [ 24.026563] PM: Adding info for acpi:PNP0C01:00 [ 24.026686] PM: Adding info for acpi:PNP0A03:00 [ 24.026815] PM: Adding info for acpi:device:01 [ 24.026866] PM: Adding info for acpi:device:02 [ 24.026913] PM: Adding info for acpi:device:03 [ 24.026960] PM: Adding info for acpi:device:04 [ 24.027008] PM: Adding info for acpi:device:05 [ 24.027058] PM: Adding info for acpi:device:06 [ 24.027112] PM: Adding info for acpi:device:07 [ 24.027160] PM: Adding info for acpi:device:08 [ 24.027219] PM: Adding info for acpi:device:09 [ 24.027260] PM: Adding info for acpi:power_resource:00 [ 24.027309] PM: Adding info for acpi:device:0a [ 24.027354] PM: Adding info for acpi:device:0b [ 24.027411] PM: Adding info for acpi:device:0c [ 24.027459] PM: Adding info for acpi:device:0d [ 24.027506] PM: Adding info for acpi:device:0e [ 24.027552] PM: Adding info for acpi:device:0f [ 24.027603] PM: Adding info for acpi:device:10 [ 24.027650] PM: Adding info for acpi:device:11 [ 24.027706] PM: Adding info for acpi:device:12 [ 24.027755] PM: Adding info for acpi:device:13 [ 24.027806] PM: Adding info for acpi:device:14 [ 24.027894] PM: Adding info for acpi:device:15 [ 24.027982] PM: Adding info for acpi:device:16 [ 24.028088] PM: Adding info for acpi:device:17 [ 24.028186] PM: Adding info for acpi:device:18 [ 24.028237] PM: Adding info for acpi:device:19 [ 24.028283] PM: Adding info for acpi:device:1a [ 24.028489] PM: Adding info for acpi:device:1b [ 24.028587] PM: Adding info for acpi:device:1c [ 24.028775] PM: Adding info for acpi:PNP0C0F:00 [ 24.028918] PM: Adding info for acpi:PNP0C0F:01 [ 24.029056] PM: Adding info for acpi:PNP0C0F:02 [ 24.029193] PM: Adding info for acpi:PNP0C0F:03 [ 24.029330] PM: Adding info for acpi:PNP0C0F:04 [ 24.029465] PM: Adding info for acpi:PNP0C0F:05 [ 24.029599] PM: Adding info for acpi:PNP0C0F:06 [ 24.029742] PM: Adding info for acpi:PNP0C0F:07 [ 24.029880] PM: Adding info for acpi:PNP0C0F:08 [ 24.030015] PM: Adding info for acpi:PNP0C0F:09 [ 24.030167] PM: Adding info for acpi:PNP0C0F:0a [ 24.030302] PM: Adding info for acpi:PNP0C0F:0b [ 24.030436] PM: Adding info for acpi:PNP0C0F:0c [ 24.030581] PM: Adding info for acpi:PNP0C0F:0d [ 24.030716] PM: Adding info for acpi:PNP0C0F:0e [ 24.030854] PM: Adding info for acpi:PNP0C0F:0f [ 24.030990] PM: Adding info for acpi:PNP0C0F:10 [ 24.031143] PM: Adding info for acpi:PNP0C0F:11 [ 24.031279] PM: Adding info for acpi:PNP0C0F:12 [ 24.031424] PM: Adding info for acpi:PNP0C0F:13 [ 24.031559] PM: Adding info for acpi:PNP0C0F:14 [ 24.031696] PM: Adding info for acpi:PNP0C0F:15 [ 24.031832] PM: Adding info for acpi:PNP0C0F:16 [ 24.031971] PM: Adding info for acpi:PNP0C0F:17 [ 24.032121] PM: Adding info for acpi:PNP0C0F:18 [ 24.032265] PM: Adding info for acpi:PNP0C0F:19 [ 24.032400] PM: Adding info for acpi:PNP0C0F:1a [ 24.032537] PM: Adding info for acpi:PNP0C0F:1b [ 24.032673] PM: Adding info for acpi:PNP0C0F:1c [ 24.032808] PM: Adding info for acpi:PNP0C0F:1d [ 24.032946] PM: Adding info for acpi:PNP0C0F:1e [ 24.033098] PM: Adding info for acpi:PNP0C0F:1f [ 24.033238] PM: Adding info for acpi:PNP0C0F:20 [ 24.033375] PM: Adding info for acpi:PNP0C0F:21 [ 24.033426] PM: Adding info for acpi:PNP0C02:02 [ 24.033475] PM: Adding info for acpi:PNP0000:00 [ 24.033522] PM: Adding info for acpi:PNP0200:00 [ 24.033575] PM: Adding info for acpi:PNP0100:00 [ 24.033621] PM: Adding info for acpi:PNP0B00:00 [ 24.033671] PM: Adding info for acpi:PNP0800:00 [ 24.033721] PM: Adding info for acpi:PNP0C04:00 [ 24.034837] PM: Adding info for acpi:PNP0F13:00 [ 24.034978] PM: Adding info for acpi:PNP0303:00 [ 24.035085] PM: Adding info for acpi:thermal:00 [ 24.035223] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 24.035229] PCI: Probing PCI hardware (bus 00) [ 24.035241] PM: Adding info for No Bus:pci0000:00 [ 24.036183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 24.036353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 24.036619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 24.039737] PM: Adding info for pci:0000:00:00.0 [ 24.042759] PM: Adding info for pci:0000:00:00.1 [ 24.045774] PM: Adding info for pci:0000:00:00.2 [ 24.048787] PM: Adding info for pci:0000:00:00.3 [ 24.051867] PM: Adding info for pci:0000:00:00.4 [ 24.054876] PM: Adding info for pci:0000:00:00.5 [ 24.057888] PM: Adding info for pci:0000:00:01.0 [ 24.060901] PM: Adding info for pci:0000:00:01.1 [ 24.063910] PM: Adding info for pci:0000:00:02.0 [ 24.066918] PM: Adding info for pci:0000:00:02.1 [ 24.069925] PM: Adding info for pci:0000:00:02.2 [ 24.072936] PM: Adding info for pci:0000:00:04.0 [ 24.075949] PM: Adding info for pci:0000:00:06.0 [ 24.078966] PM: Adding info for pci:0000:00:08.0 [ 24.081981] PM: Adding info for pci:0000:00:09.0 [ 24.084993] PM: Adding info for pci:0000:00:0b.0 [ 24.088010] PM: Adding info for pci:0000:00:1e.0 [ 24.088052] PM: Adding info for pci:0000:02:07.0 [ 24.088092] PM: Adding info for pci:0000:02:08.0 [ 24.088136] PM: Adding info for pci:0000:02:0b.0 [ 24.088183] PM: Adding info for pci:0000:01:00.0 [ 24.088398] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 24.088573] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.088740] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.088909] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 24.089079] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.089248] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 24.089418] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 24.089585] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 24.089754] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.089922] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 24.090096] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.090264] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 24.090434] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 24.090602] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.090772] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.090940] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 24.091120] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 24.091268] ACPI: PCI Interrupt Link [APC1] (IRQs *16) [ 24.091401] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 24.091530] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 24.091659] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 24.091787] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 24.091979] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21) *0 [ 24.092167] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21) *0 [ 24.092351] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21) *0 [ 24.092535] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21) *0, disabled. [ 24.092720] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21) *0 [ 24.092903] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21) *0, disabled. [ 24.093037] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 24.093222] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21) *0 [ 24.093405] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21) *0, disabled. [ 24.093589] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21) *0, disabled. [ 24.093773] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21) *0, disabled. [ 24.093968] ACPI: PCI Interrupt Link [APSI] (IRQs 22) *0 [ 24.094103] ACPI: Power Resource [ISAV] (on) [ 24.094119] Linux Plug and Play Support v0.97 (c) Adam Belay [ 24.094131] pnp: PnP ACPI init [ 24.094137] PM: Adding info for No Bus:pnp0 [ 24.094141] ACPI: bus type pnp registered [ 24.094355] PM: Adding info for pnp:00:00 [ 24.094409] PM: Adding info for pnp:00:01 [ 24.094607] PM: Adding info for pnp:00:02 [ 24.094768] PM: Adding info for pnp:00:03 [ 24.096363] PM: Adding info for pnp:00:04 [ 24.096419] PM: Adding info for pnp:00:05 [ 24.096482] PM: Adding info for pnp:00:06 [ 24.096541] PM: Adding info for pnp:00:07 [ 24.096596] PM: Adding info for pnp:00:08 [ 24.097676] PM: Adding info for pnp:00:09 [ 24.097785] PM: Adding info for pnp:00:0a [ 24.097870] pnp: PnP ACPI: found 11 devices [ 24.097873] ACPI: ACPI bus type pnp unregistered [ 24.097877] PnPBIOS: Disabled by ACPI PNP [ 24.097934] PCI: Using ACPI for IRQ routing [ 24.097939] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 24.142079] NET: Registered protocol family 8 [ 24.142082] NET: Registered protocol family 20 [ 24.142092] NetLabel: Initializing [ 24.142094] NetLabel: domain hash size = 128 [ 24.142096] NetLabel: protocols = UNLABELED CIPSOv4 [ 24.142110] NetLabel: unlabeled traffic allowed by default [ 24.142188] pnp: 00:00: ioport range 0x4000-0x407f has been reserved [ 24.142193] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 24.142196] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 24.142199] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved [ 24.142202] pnp: 00:00: ioport range 0x4200-0x427f has been reserved [ 24.142205] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved [ 24.142211] pnp: 00:01: ioport range 0x5000-0x503f has been reserved [ 24.142214] pnp: 00:01: ioport range 0x5100-0x513f has been reserved [ 24.142220] pnp: 00:02: iomem range 0xf0000-0xf3fff could not be reserved [ 24.142224] pnp: 00:02: iomem range 0xf4000-0xf7fff could not be reserved [ 24.142227] pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 24.142230] pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 24.142248] PM: Adding info for No Bus:mem [ 24.142277] PM: Adding info for No Bus:kmem [ 24.142303] PM: Adding info for No Bus:null [ 24.142328] PM: Adding info for No Bus:port [ 24.142355] PM: Adding info for No Bus:zero [ 24.142389] PM: Adding info for No Bus:full [ 24.142422] PM: Adding info for No Bus:random [ 24.142450] PM: Adding info for No Bus:urandom [ 24.142477] PM: Adding info for No Bus:kmsg [ 24.142507] PM: Adding info for No Bus:oldmem [ 24.142909] Time: tsc clocksource has been installed. [ 24.172549] PCI: Bridge: 0000:00:08.0 [ 24.172552] IO window: a000-bfff [ 24.172558] MEM window: dc000000-ddffffff [ 24.172562] PREFETCH window: 70000000-700fffff [ 24.172567] PCI: Bridge: 0000:00:1e.0 [ 24.172569] IO window: disabled. [ 24.172573] MEM window: de000000-dfffffff [ 24.172577] PREFETCH window: d0000000-d7ffffff [ 24.172588] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 24.172608] NET: Registered protocol family 2 [ 24.181931] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 24.182115] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 24.184133] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 24.184808] TCP: Hash tables configured (established 131072 bind 65536) [ 24.184811] TCP reno registered [ 24.187022] checking if image is initramfs... it is [ 27.781877] Freeing initrd memory: 42150k freed [ 27.782191] PM: Adding info for platform:pcspkr [ 27.782332] PM: Adding info for No Bus:snapshot [ 27.782363] audit: initializing netlink socket (disabled) [ 27.782378] audit(1190083229.860:1): initialized [ 27.782446] highmem bounce pool size: 64 pages [ 27.782491] VFS: Disk quotas dquot_6.5.1 [ 27.782502] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 27.782556] io scheduler noop registered [ 27.782559] io scheduler anticipatory registered [ 27.782561] io scheduler deadline registered (default) [ 27.782568] io scheduler cfq registered [ 27.804283] Boot video device is 0000:01:00.0 [ 27.804444] PM: Adding info for No Bus:pnp1 [ 27.804448] isapnp: Scanning for PnP cards... [ 28.161353] isapnp: No Plug & Play device found [ 28.161374] PM: Adding info for No Bus:tty [ 28.161404] PM: Adding info for No Bus:console [ 28.161432] PM: Adding info for No Bus:ptmx [ 28.161458] PM: Adding info for No Bus:tty0 [ 28.161500] PM: Adding info for No Bus:vcs [ 28.161529] PM: Adding info for No Bus:vcsa [ 28.161560] PM: Adding info for No Bus:tty1 [ 28.161590] PM: Adding info for No Bus:tty2 [ 28.161617] PM: Adding info for No Bus:tty3 [ 28.161644] PM: Adding info for No Bus:tty4 [ 28.161677] PM: Adding info for No Bus:tty5 [ 28.161708] PM: Adding info for No Bus:tty6 [ 28.161737] PM: Adding info for No Bus:tty7 [ 28.161765] PM: Adding info for No Bus:tty8 [ 28.161793] PM: Adding info for No Bus:tty9 [ 28.161824] PM: Adding info for No Bus:tty10 [ 28.161859] PM: Adding info for No Bus:tty11 [ 28.161889] PM: Adding info for No Bus:tty12 [ 28.161923] PM: Adding info for No Bus:tty13 [ 28.161954] PM: Adding info for No Bus:tty14 [ 28.161983] PM: Adding info for No Bus:tty15 [ 28.162012] PM: Adding info for No Bus:tty16 [ 28.162047] PM: Adding info for No Bus:tty17 [ 28.162078] PM: Adding info for No Bus:tty18 [ 28.162107] PM: Adding info for No Bus:tty19 [ 28.162137] PM: Adding info for No Bus:tty20 [ 28.162166] PM: Adding info for No Bus:tty21 [ 28.162197] PM: Adding info for No Bus:tty22 [ 28.162233] PM: Adding info for No Bus:tty23 [ 28.162265] PM: Adding info for No Bus:tty24 [ 28.162295] PM: Adding info for No Bus:tty25 [ 28.162327] PM: Adding info for No Bus:tty26 [ 28.162357] PM: Adding info for No Bus:tty27 [ 28.162386] PM: Adding info for No Bus:tty28 [ 28.162423] PM: Adding info for No Bus:tty29 [ 28.162453] PM: Adding info for No Bus:tty30 [ 28.162482] PM: Adding info for No Bus:tty31 [ 28.162513] PM: Adding info for No Bus:tty32 [ 28.162543] PM: Adding info for No Bus:tty33 [ 28.162574] PM: Adding info for No Bus:tty34 [ 28.162612] PM: Adding info for No Bus:tty35 [ 28.162642] PM: Adding info for No Bus:tty36 [ 28.162672] PM: Adding info for No Bus:tty37 [ 28.162704] PM: Adding info for No Bus:tty38 [ 28.162734] PM: Adding info for No Bus:tty39 [ 28.162764] PM: Adding info for No Bus:tty40 [ 28.162801] PM: Adding info for No Bus:tty41 [ 28.162834] PM: Adding info for No Bus:tty42 [ 28.162864] PM: Adding info for No Bus:tty43 [ 28.162898] PM: Adding info for No Bus:tty44 [ 28.162934] PM: Adding info for No Bus:tty45 [ 28.162963] PM: Adding info for No Bus:tty46 [ 28.163001] PM: Adding info for No Bus:tty47 [ 28.163032] PM: Adding info for No Bus:tty48 [ 28.163063] PM: Adding info for No Bus:tty49 [ 28.163095] PM: Adding info for No Bus:tty50 [ 28.163126] PM: Adding info for No Bus:tty51 [ 28.163156] PM: Adding info for No Bus:tty52 [ 28.163194] PM: Adding info for No Bus:tty53 [ 28.163225] PM: Adding info for No Bus:tty54 [ 28.163258] PM: Adding info for No Bus:tty55 [ 28.163290] PM: Adding info for No Bus:tty56 [ 28.163322] PM: Adding info for No Bus:tty57 [ 28.163356] PM: Adding info for No Bus:tty58 [ 28.163395] PM: Adding info for No Bus:tty59 [ 28.163426] PM: Adding info for No Bus:tty60 [ 28.163457] PM: Adding info for No Bus:tty61 [ 28.163489] PM: Adding info for No Bus:tty62 [ 28.163520] PM: Adding info for No Bus:tty63 [ 28.163597] PM: Adding info for No Bus:ptyp0 [ 28.163639] PM: Adding info for No Bus:ptyp1 [ 28.163670] PM: Adding info for No Bus:ptyp2 [ 28.163701] PM: Adding info for No Bus:ptyp3 [ 28.163733] PM: Adding info for No Bus:ptyp4 [ 28.163766] PM: Adding info for No Bus:ptyp5 [ 28.163797] PM: Adding info for No Bus:ptyp6 [ 28.163835] PM: Adding info for No Bus:ptyp7 [ 28.163865] PM: Adding info for No Bus:ptyp8 [ 28.163897] PM: Adding info for No Bus:ptyp9 [ 28.163933] PM: Adding info for No Bus:ptypa [ 28.163965] PM: Adding info for No Bus:ptypb [ 28.163997] PM: Adding info for No Bus:ptypc [ 28.164036] PM: Adding info for No Bus:ptypd [ 28.164067] PM: Adding info for No Bus:ptype [ 28.164101] PM: Adding info for No Bus:ptypf [ 28.164134] PM: Adding info for No Bus:ptyq0 [ 28.164168] PM: Adding info for No Bus:ptyq1 [ 28.164202] PM: Adding info for No Bus:ptyq2 [ 28.164241] PM: Adding info for No Bus:ptyq3 [ 28.164273] PM: Adding info for No Bus:ptyq4 [ 28.164306] PM: Adding info for No Bus:ptyq5 [ 28.164338] PM: Adding info for No Bus:ptyq6 [ 28.164370] PM: Adding info for No Bus:ptyq7 [ 28.164401] PM: Adding info for No Bus:ptyq8 [ 28.164440] PM: Adding info for No Bus:ptyq9 [ 28.164472] PM: Adding info for No Bus:ptyqa [ 28.164506] PM: Adding info for No Bus:ptyqb [ 28.164540] PM: Adding info for No Bus:ptyqc [ 28.164573] PM: Adding info for No Bus:ptyqd [ 28.164605] PM: Adding info for No Bus:ptyqe [ 28.164644] PM: Adding info for No Bus:ptyqf [ 28.164677] PM: Adding info for No Bus:ptyr0 [ 28.164709] PM: Adding info for No Bus:ptyr1 [ 28.164742] PM: Adding info for No Bus:ptyr2 [ 28.164776] PM: Adding info for No Bus:ptyr3 [ 28.164810] PM: Adding info for No Bus:ptyr4 [ 28.164850] PM: Adding info for No Bus:ptyr5 [ 28.164885] PM: Adding info for No Bus:ptyr6 [ 28.164945] PM: Adding info for No Bus:ptyr7 [ 28.164977] PM: Adding info for No Bus:ptyr8 [ 28.165008] PM: Adding info for No Bus:ptyr9 [ 28.165040] PM: Adding info for No Bus:ptyra [ 28.165077] PM: Adding info for No Bus:ptyrb [ 28.165109] PM: Adding info for No Bus:ptyrc [ 28.165141] PM: Adding info for No Bus:ptyrd [ 28.165174] PM: Adding info for No Bus:ptyre [ 28.165207] PM: Adding info for No Bus:ptyrf [ 28.165240] PM: Adding info for No Bus:ptys0 [ 28.165279] PM: Adding info for No Bus:ptys1 [ 28.165312] PM: Adding info for No Bus:ptys2 [ 28.165344] PM: Adding info for No Bus:ptys3 [ 28.165378] PM: Adding info for No Bus:ptys4 [ 28.165411] PM: Adding info for No Bus:ptys5 [ 28.165443] PM: Adding info for No Bus:ptys6 [ 28.165484] PM: Adding info for No Bus:ptys7 [ 28.165517] PM: Adding info for No Bus:ptys8 [ 28.165549] PM: Adding info for No Bus:ptys9 [ 28.165583] PM: Adding info for No Bus:ptysa [ 28.165615] PM: Adding info for No Bus:ptysb [ 28.165652] PM: Adding info for No Bus:ptysc [ 28.165699] PM: Adding info for No Bus:ptysd [ 28.165735] PM: Adding info for No Bus:ptyse [ 28.165770] PM: Adding info for No Bus:ptysf [ 28.165804] PM: Adding info for No Bus:ptyt0 [ 28.165838] PM: Adding info for No Bus:ptyt1 [ 28.165873] PM: Adding info for No Bus:ptyt2 [ 28.165941] PM: Adding info for No Bus:ptyt3 [ 28.165977] PM: Adding info for No Bus:ptyt4 [ 28.166009] PM: Adding info for No Bus:ptyt5 [ 28.166043] PM: Adding info for No Bus:ptyt6 [ 28.166076] PM: Adding info for No Bus:ptyt7 [ 28.166112] PM: Adding info for No Bus:ptyt8 [ 28.166152] PM: Adding info for No Bus:ptyt9 [ 28.166187] PM: Adding info for No Bus:ptyta [ 28.166223] PM: Adding info for No Bus:ptytb [ 28.166258] PM: Adding info for No Bus:ptytc [ 28.166292] PM: Adding info for No Bus:ptytd [ 28.166326] PM: Adding info for No Bus:ptyte [ 28.166366] PM: Adding info for No Bus:ptytf [ 28.166401] PM: Adding info for No Bus:ptyu0 [ 28.166435] PM: Adding info for No Bus:ptyu1 [ 28.166469] PM: Adding info for No Bus:ptyu2 [ 28.166506] PM: Adding info for No Bus:ptyu3 [ 28.166541] PM: Adding info for No Bus:ptyu4 [ 28.166582] PM: Adding info for No Bus:ptyu5 [ 28.166617] PM: Adding info for No Bus:ptyu6 [ 28.166652] PM: Adding info for No Bus:ptyu7 [ 28.166688] PM: Adding info for No Bus:ptyu8 [ 28.166725] PM: Adding info for No Bus:ptyu9 [ 28.166760] PM: Adding info for No Bus:ptyua [ 28.166802] PM: Adding info for No Bus:ptyub [ 28.166841] PM: Adding info for No Bus:ptyuc [ 28.166877] PM: Adding info for No Bus:ptyud [ 28.166945] PM: Adding info for No Bus:ptyue [ 28.166980] PM: Adding info for No Bus:ptyuf [ 28.167015] PM: Adding info for No Bus:ptyv0 [ 28.167055] PM: Adding info for No Bus:ptyv1 [ 28.167090] PM: Adding info for No Bus:ptyv2 [ 28.167125] PM: Adding info for No Bus:ptyv3 [ 28.167161] PM: Adding info for No Bus:ptyv4 [ 28.167195] PM: Adding info for No Bus:ptyv5 [ 28.167230] PM: Adding info for No Bus:ptyv6 [ 28.167272] PM: Adding info for No Bus:ptyv7 [ 28.167308] PM: Adding info for No Bus:ptyv8 [ 28.167345] PM: Adding info for No Bus:ptyv9 [ 28.167381] PM: Adding info for No Bus:ptyva [ 28.167417] PM: Adding info for No Bus:ptyvb [ 28.167453] PM: Adding info for No Bus:ptyvc [ 28.167496] PM: Adding info for No Bus:ptyvd [ 28.167533] PM: Adding info for No Bus:ptyve [ 28.167569] PM: Adding info for No Bus:ptyvf [ 28.167605] PM: Adding info for No Bus:ptyw0 [ 28.167642] PM: Adding info for No Bus:ptyw1 [ 28.167679] PM: Adding info for No Bus:ptyw2 [ 28.167725] PM: Adding info for No Bus:ptyw3 [ 28.167764] PM: Adding info for No Bus:ptyw4 [ 28.167801] PM: Adding info for No Bus:ptyw5 [ 28.167842] PM: Adding info for No Bus:ptyw6 [ 28.167879] PM: Adding info for No Bus:ptyw7 [ 28.168072] PM: Adding info for No Bus:ptyw8 [ 28.168110] PM: Adding info for No Bus:ptyw9 [ 28.168145] PM: Adding info for No Bus:ptywa [ 28.168179] PM: Adding info for No Bus:ptywb [ 28.168214] PM: Adding info for No Bus:ptywc [ 28.168249] PM: Adding info for No Bus:ptywd [ 28.168283] PM: Adding info for No Bus:ptywe [ 28.168321] PM: Adding info for No Bus:ptywf [ 28.168355] PM: Adding info for No Bus:ptyx0 [ 28.168388] PM: Adding info for No Bus:ptyx1 [ 28.168424] PM: Adding info for No Bus:ptyx2 [ 28.168459] PM: Adding info for No Bus:ptyx3 [ 28.168494] PM: Adding info for No Bus:ptyx4 [ 28.168530] PM: Adding info for No Bus:ptyx5 [ 28.168565] PM: Adding info for No Bus:ptyx6 [ 28.168599] PM: Adding info for No Bus:ptyx7 [ 28.168634] PM: Adding info for No Bus:ptyx8 [ 28.168669] PM: Adding info for No Bus:ptyx9 [ 28.168703] PM: Adding info for No Bus:ptyxa [ 28.168742] PM: Adding info for No Bus:ptyxb [ 28.168778] PM: Adding info for No Bus:ptyxc [ 28.168813] PM: Adding info for No Bus:ptyxd [ 28.168848] PM: Adding info for No Bus:ptyxe [ 28.168883] PM: Adding info for No Bus:ptyxf [ 28.168921] PM: Adding info for No Bus:ptyy0 [ 28.168960] PM: Adding info for No Bus:ptyy1 [ 28.168996] PM: Adding info for No Bus:ptyy2 [ 28.169033] PM: Adding info for No Bus:ptyy3 [ 28.169070] PM: Adding info for No Bus:ptyy4 [ 28.169105] PM: Adding info for No Bus:ptyy5 [ 28.169144] PM: Adding info for No Bus:ptyy6 [ 28.169183] PM: Adding info for No Bus:ptyy7 [ 28.169219] PM: Adding info for No Bus:ptyy8 [ 28.169257] PM: Adding info for No Bus:ptyy9 [ 28.169294] PM: Adding info for No Bus:ptyya [ 28.169331] PM: Adding info for No Bus:ptyyb [ 28.169369] PM: Adding info for No Bus:ptyyc [ 28.169410] PM: Adding info for No Bus:ptyyd [ 28.169448] PM: Adding info for No Bus:ptyye [ 28.169486] PM: Adding info for No Bus:ptyyf [ 28.169523] PM: Adding info for No Bus:ptyz0 [ 28.169562] PM: Adding info for No Bus:ptyz1 [ 28.169600] PM: Adding info for No Bus:ptyz2 [ 28.169642] PM: Adding info for No Bus:ptyz3 [ 28.169681] PM: Adding info for No Bus:ptyz4 [ 28.169719] PM: Adding info for No Bus:ptyz5 [ 28.169756] PM: Adding info for No Bus:ptyz6 [ 28.169795] PM: Adding info for No Bus:ptyz7 [ 28.169837] PM: Adding info for No Bus:ptyz8 [ 28.169882] PM: Adding info for No Bus:ptyz9 [ 28.169923] PM: Adding info for No Bus:ptyza [ 28.169962] PM: Adding info for No Bus:ptyzb [ 28.170003] PM: Adding info for No Bus:ptyzc [ 28.170042] PM: Adding info for No Bus:ptyzd [ 28.170080] PM: Adding info for No Bus:ptyze [ 28.170123] PM: Adding info for No Bus:ptyzf [ 28.170161] PM: Adding info for No Bus:ptya0 [ 28.170202] PM: Adding info for No Bus:ptya1 [ 28.170241] PM: Adding info for No Bus:ptya2 [ 28.170280] PM: Adding info for No Bus:ptya3 [ 28.170321] PM: Adding info for No Bus:ptya4 [ 28.170367] PM: Adding info for No Bus:ptya5 [ 28.170407] PM: Adding info for No Bus:ptya6 [ 28.170449] PM: Adding info for No Bus:ptya7 [ 28.170489] PM: Adding info for No Bus:ptya8 [ 28.170529] PM: Adding info for No Bus:ptya9 [ 28.170570] PM: Adding info for No Bus:ptyaa [ 28.170618] PM: Adding info for No Bus:ptyab [ 28.170660] PM: Adding info for No Bus:ptyac [ 28.170701] PM: Adding info for No Bus:ptyad [ 28.170741] PM: Adding info for No Bus:ptyae [ 28.170782] PM: Adding info for No Bus:ptyaf [ 28.170824] PM: Adding info for No Bus:ptyb0 [ 28.170871] PM: Adding info for No Bus:ptyb1 [ 28.170916] PM: Adding info for No Bus:ptyb2 [ 28.170959] PM: Adding info for No Bus:ptyb3 [ 28.171001] PM: Adding info for No Bus:ptyb4 [ 28.171043] PM: Adding info for No Bus:ptyb5 [ 28.171085] PM: Adding info for No Bus:ptyb6 [ 28.171132] PM: Adding info for No Bus:ptyb7 [ 28.171173] PM: Adding info for No Bus:ptyb8 [ 28.171215] PM: Adding info for No Bus:ptyb9 [ 28.171256] PM: Adding info for No Bus:ptyba [ 28.171299] PM: Adding info for No Bus:ptybb [ 28.171342] PM: Adding info for No Bus:ptybc [ 28.171393] PM: Adding info for No Bus:ptybd [ 28.171438] PM: Adding info for No Bus:ptybe [ 28.171481] PM: Adding info for No Bus:ptybf [ 28.171523] PM: Adding info for No Bus:ptyc0 [ 28.171565] PM: Adding info for No Bus:ptyc1 [ 28.171608] PM: Adding info for No Bus:ptyc2 [ 28.171656] PM: Adding info for No Bus:ptyc3 [ 28.171702] PM: Adding info for No Bus:ptyc4 [ 28.171745] PM: Adding info for No Bus:ptyc5 [ 28.171787] PM: Adding info for No Bus:ptyc6 [ 28.171829] PM: Adding info for No Bus:ptyc7 [ 28.171874] PM: Adding info for No Bus:ptyc8 [ 28.171951] PM: Adding info for No Bus:ptyc9 [ 28.171993] PM: Adding info for No Bus:ptyca [ 28.172035] PM: Adding info for No Bus:ptycb [ 28.172079] PM: Adding info for No Bus:ptycc [ 28.172120] PM: Adding info for No Bus:ptycd [ 28.172162] PM: Adding info for No Bus:ptyce [ 28.172209] PM: Adding info for No Bus:ptycf [ 28.172251] PM: Adding info for No Bus:ptyd0 [ 28.172293] PM: Adding info for No Bus:ptyd1 [ 28.172336] PM: Adding info for No Bus:ptyd2 [ 28.172377] PM: Adding info for No Bus:ptyd3 [ 28.172421] PM: Adding info for No Bus:ptyd4 [ 28.172470] PM: Adding info for No Bus:ptyd5 [ 28.172513] PM: Adding info for No Bus:ptyd6 [ 28.172556] PM: Adding info for No Bus:ptyd7 [ 28.172600] PM: Adding info for No Bus:ptyd8 [ 28.172643] PM: Adding info for No Bus:ptyd9 [ 28.172686] PM: Adding info for No Bus:ptyda [ 28.172735] PM: Adding info for No Bus:ptydb [ 28.172778] PM: Adding info for No Bus:ptydc [ 28.172820] PM: Adding info for No Bus:ptydd [ 28.172864] PM: Adding info for No Bus:ptyde [ 28.172935] PM: Adding info for No Bus:ptydf [ 28.172977] PM: Adding info for No Bus:ptye0 [ 28.173026] PM: Adding info for No Bus:ptye1 [ 28.173070] PM: Adding info for No Bus:ptye2 [ 28.173114] PM: Adding info for No Bus:ptye3 [ 28.173157] PM: Adding info for No Bus:ptye4 [ 28.173199] PM: Adding info for No Bus:ptye5 [ 28.173242] PM: Adding info for No Bus:ptye6 [ 28.173291] PM: Adding info for No Bus:ptye7 [ 28.173335] PM: Adding info for No Bus:ptye8 [ 28.173379] PM: Adding info for No Bus:ptye9 [ 28.173424] PM: Adding info for No Bus:ptyea [ 28.173469] PM: Adding info for No Bus:ptyeb [ 28.173513] PM: Adding info for No Bus:ptyec [ 28.173563] PM: Adding info for No Bus:ptyed [ 28.173607] PM: Adding info for No Bus:ptyee [ 28.173650] PM: Adding info for No Bus:ptyef [ 28.173700] PM: Adding info for No Bus:ttyp0 [ 28.173744] PM: Adding info for No Bus:ttyp1 [ 28.173787] PM: Adding info for No Bus:ttyp2 [ 28.173837] PM: Adding info for No Bus:ttyp3 [ 28.173881] PM: Adding info for No Bus:ttyp4 [ 28.173948] PM: Adding info for No Bus:ttyp5 [ 28.173991] PM: Adding info for No Bus:ttyp6 [ 28.174033] PM: Adding info for No Bus:ttyp7 [ 28.174075] PM: Adding info for No Bus:ttyp8 [ 28.174123] PM: Adding info for No Bus:ttyp9 [ 28.174166] PM: Adding info for No Bus:ttypa [ 28.174209] PM: Adding info for No Bus:ttypb [ 28.174254] PM: Adding info for No Bus:ttypc [ 28.174298] PM: Adding info for No Bus:ttypd [ 28.174342] PM: Adding info for No Bus:ttype [ 28.174392] PM: Adding info for No Bus:ttypf [ 28.174439] PM: Adding info for No Bus:ttyq0 [ 28.174482] PM: Adding info for No Bus:ttyq1 [ 28.174526] PM: Adding info for No Bus:ttyq2 [ 28.174571] PM: Adding info for No Bus:ttyq3 [ 28.174616] PM: Adding info for No Bus:ttyq4 [ 28.174666] PM: Adding info for No Bus:ttyq5 [ 28.174711] PM: Adding info for No Bus:ttyq6 [ 28.174756] PM: Adding info for No Bus:ttyq7 [ 28.174802] PM: Adding info for No Bus:ttyq8 [ 28.174848] PM: Adding info for No Bus:ttyq9 [ 28.174917] PM: Adding info for No Bus:ttyqa [ 28.174971] PM: Adding info for No Bus:ttyqb [ 28.175016] PM: Adding info for No Bus:ttyqc [ 28.175060] PM: Adding info for No Bus:ttyqd [ 28.175104] PM: Adding info for No Bus:ttyqe [ 28.175149] PM: Adding info for No Bus:ttyqf [ 28.175192] PM: Adding info for No Bus:ttyr0 [ 28.175243] PM: Adding info for No Bus:ttyr1 [ 28.175288] PM: Adding info for No Bus:ttyr2 [ 28.175335] PM: Adding info for No Bus:ttyr3 [ 28.175381] PM: Adding info for No Bus:ttyr4 [ 28.175427] PM: Adding info for No Bus:ttyr5 [ 28.175471] PM: Adding info for No Bus:ttyr6 [ 28.175525] PM: Adding info for No Bus:ttyr7 [ 28.175571] PM: Adding info for No Bus:ttyr8 [ 28.175617] PM: Adding info for No Bus:ttyr9 [ 28.175661] PM: Adding info for No Bus:ttyra [ 28.175707] PM: Adding info for No Bus:ttyrb [ 28.175754] PM: Adding info for No Bus:ttyrc [ 28.175808] PM: Adding info for No Bus:ttyrd [ 28.175854] PM: Adding info for No Bus:ttyre [ 28.175926] PM: Adding info for No Bus:ttyrf [ 28.175973] PM: Adding info for No Bus:ttys0 [ 28.176019] PM: Adding info for No Bus:ttys1 [ 28.176067] PM: Adding info for No Bus:ttys2 [ 28.176119] PM: Adding info for No Bus:ttys3 [ 28.176165] PM: Adding info for No Bus:ttys4 [ 28.176210] PM: Adding info for No Bus:ttys5 [ 28.176256] PM: Adding info for No Bus:ttys6 [ 28.176302] PM: Adding info for No Bus:ttys7 [ 28.176348] PM: Adding info for No Bus:ttys8 [ 28.176400] PM: Adding info for No Bus:ttys9 [ 28.176447] PM: Adding info for No Bus:ttysa [ 28.176494] PM: Adding info for No Bus:ttysb [ 28.176542] PM: Adding info for No Bus:ttysc [ 28.176592] PM: Adding info for No Bus:ttysd [ 28.176642] PM: Adding info for No Bus:ttyse [ 28.176696] PM: Adding info for No Bus:ttysf [ 28.176743] PM: Adding info for No Bus:ttyt0 [ 28.176790] PM: Adding info for No Bus:ttyt1 [ 28.176837] PM: Adding info for No Bus:ttyt2 [ 28.176885] PM: Adding info for No Bus:ttyt3 [ 28.176959] PM: Adding info for No Bus:ttyt4 [ 28.177012] PM: Adding info for No Bus:ttyt5 [ 28.177059] PM: Adding info for No Bus:ttyt6 [ 28.177105] PM: Adding info for No Bus:ttyt7 [ 28.177154] PM: Adding info for No Bus:ttyt8 [ 28.177201] PM: Adding info for No Bus:ttyt9 [ 28.177249] PM: Adding info for No Bus:ttyta [ 28.177305] PM: Adding info for No Bus:ttytb [ 28.177354] PM: Adding info for No Bus:ttytc [ 28.177403] PM: Adding info for No Bus:ttytd [ 28.177452] PM: Adding info for No Bus:ttyte [ 28.177500] PM: Adding info for No Bus:ttytf [ 28.177547] PM: Adding info for No Bus:ttyu0 [ 28.177602] PM: Adding info for No Bus:ttyu1 [ 28.177651] PM: Adding info for No Bus:ttyu2 [ 28.177701] PM: Adding info for No Bus:ttyu3 [ 28.177750] PM: Adding info for No Bus:ttyu4 [ 28.177798] PM: Adding info for No Bus:ttyu5 [ 28.177847] PM: Adding info for No Bus:ttyu6 [ 28.177928] PM: Adding info for No Bus:ttyu7 [ 28.177977] PM: Adding info for No Bus:ttyu8 [ 28.178026] PM: Adding info for No Bus:ttyu9 [ 28.178073] PM: Adding info for No Bus:ttyua [ 28.178121] PM: Adding info for No Bus:ttyub [ 28.178171] PM: Adding info for No Bus:ttyuc [ 28.178225] PM: Adding info for No Bus:ttyud [ 28.178277] PM: Adding info for No Bus:ttyue [ 28.178326] PM: Adding info for No Bus:ttyuf [ 28.178375] PM: Adding info for No Bus:ttyv0 [ 28.178424] PM: Adding info for No Bus:ttyv1 [ 28.178473] PM: Adding info for No Bus:ttyv2 [ 28.178530] PM: Adding info for No Bus:ttyv3 [ 28.178580] PM: Adding info for No Bus:ttyv4 [ 28.178629] PM: Adding info for No Bus:ttyv5 [ 28.178677] PM: Adding info for No Bus:ttyv6 [ 28.178728] PM: Adding info for No Bus:ttyv7 [ 28.178777] PM: Adding info for No Bus:ttyv8 [ 28.178835] PM: Adding info for No Bus:ttyv9 [ 28.178907] PM: Adding info for No Bus:ttyva [ 28.178957] PM: Adding info for No Bus:ttyvb [ 28.179008] PM: Adding info for No Bus:ttyvc [ 28.179057] PM: Adding info for No Bus:ttyvd [ 28.179106] PM: Adding info for No Bus:ttyve [ 28.179161] PM: Adding info for No Bus:ttyvf [ 28.179211] PM: Adding info for No Bus:ttyw0 [ 28.179260] PM: Adding info for No Bus:ttyw1 [ 28.179311] PM: Adding info for No Bus:ttyw2 [ 28.179361] PM: Adding info for No Bus:ttyw3 [ 28.179412] PM: Adding info for No Bus:ttyw4 [ 28.179471] PM: Adding info for No Bus:ttyw5 [ 28.179520] PM: Adding info for No Bus:ttyw6 [ 28.179570] PM: Adding info for No Bus:ttyw7 [ 28.179622] PM: Adding info for No Bus:ttyw8 [ 28.179673] PM: Adding info for No Bus:ttyw9 [ 28.179723] PM: Adding info for No Bus:ttywa [ 28.179780] PM: Adding info for No Bus:ttywb [ 28.179831] PM: Adding info for No Bus:ttywc [ 28.179882] PM: Adding info for No Bus:ttywd [ 28.179960] PM: Adding info for No Bus:ttywe [ 28.180010] PM: Adding info for No Bus:ttywf [ 28.180062] PM: Adding info for No Bus:ttyx0 [ 28.180119] PM: Adding info for No Bus:ttyx1 [ 28.180170] PM: Adding info for No Bus:ttyx2 [ 28.180221] PM: Adding info for No Bus:ttyx3 [ 28.180273] PM: Adding info for No Bus:ttyx4 [ 28.180325] PM: Adding info for No Bus:ttyx5 [ 28.180376] PM: Adding info for No Bus:ttyx6 [ 28.180433] PM: Adding info for No Bus:ttyx7 [ 28.180487] PM: Adding info for No Bus:ttyx8 [ 28.180542] PM: Adding info for No Bus:ttyx9 [ 28.180594] PM: Adding info for No Bus:ttyxa [ 28.180650] PM: Adding info for No Bus:ttyxb [ 28.180703] PM: Adding info for No Bus:ttyxc [ 28.180762] PM: Adding info for No Bus:ttyxd [ 28.180815] PM: Adding info for No Bus:ttyxe [ 28.180867] PM: Adding info for No Bus:ttyxf [ 28.180947] PM: Adding info for No Bus:ttyy0 [ 28.181000] PM: Adding info for No Bus:ttyy1 [ 28.181051] PM: Adding info for No Bus:ttyy2 [ 28.181109] PM: Adding info for No Bus:ttyy3 [ 28.181161] PM: Adding info for No Bus:ttyy4 [ 28.181214] PM: Adding info for No Bus:ttyy5 [ 28.181268] PM: Adding info for No Bus:ttyy6 [ 28.181320] PM: Adding info for No Bus:ttyy7 [ 28.181374] PM: Adding info for No Bus:ttyy8 [ 28.181433] PM: Adding info for No Bus:ttyy9 [ 28.181486] PM: Adding info for No Bus:ttyya [ 28.181538] PM: Adding info for No Bus:ttyyb [ 28.181592] PM: Adding info for No Bus:ttyyc [ 28.181645] PM: Adding info for No Bus:ttyyd [ 28.181698] PM: Adding info for No Bus:ttyye [ 28.181758] PM: Adding info for No Bus:ttyyf [ 28.181811] PM: Adding info for No Bus:ttyz0 [ 28.181865] PM: Adding info for No Bus:ttyz1 [ 28.181947] PM: Adding info for No Bus:ttyz2 [ 28.181999] PM: Adding info for No Bus:ttyz3 [ 28.182052] PM: Adding info for No Bus:ttyz4 [ 28.182111] PM: Adding info for No Bus:ttyz5 [ 28.182164] PM: Adding info for No Bus:ttyz6 [ 28.182217] PM: Adding info for No Bus:ttyz7 [ 28.182270] PM: Adding info for No Bus:ttyz8 [ 28.182325] PM: Adding info for No Bus:ttyz9 [ 28.182379] PM: Adding info for No Bus:ttyza [ 28.182439] PM: Adding info for No Bus:ttyzb [ 28.182496] PM: Adding info for No Bus:ttyzc [ 28.182550] PM: Adding info for No Bus:ttyzd [ 28.182604] PM: Adding info for No Bus:ttyze [ 28.182661] PM: Adding info for No Bus:ttyzf [ 28.182714] PM: Adding info for No Bus:ttya0 [ 28.182775] PM: Adding info for No Bus:ttya1 [ 28.182831] PM: Adding info for No Bus:ttya2 [ 28.182911] PM: Adding info for No Bus:ttya3 [ 28.182966] PM: Adding info for No Bus:ttya4 [ 28.183020] PM: Adding info for No Bus:ttya5 [ 28.183073] PM: Adding info for No Bus:ttya6 [ 28.183134] PM: Adding info for No Bus:ttya7 [ 28.183189] PM: Adding info for No Bus:ttya8 [ 28.183243] PM: Adding info for No Bus:ttya9 [ 28.183296] PM: Adding info for No Bus:ttyaa [ 28.183350] PM: Adding info for No Bus:ttyab [ 28.183406] PM: Adding info for No Bus:ttyac [ 28.183466] PM: Adding info for No Bus:ttyad [ 28.183521] PM: Adding info for No Bus:ttyae [ 28.183575] PM: Adding info for No Bus:ttyaf [ 28.183629] PM: Adding info for No Bus:ttyb0 [ 28.183684] PM: Adding info for No Bus:ttyb1 [ 28.183739] PM: Adding info for No Bus:ttyb2 [ 28.183804] PM: Adding info for No Bus:ttyb3 [ 28.183860] PM: Adding info for No Bus:ttyb4 [ 28.183939] PM: Adding info for No Bus:ttyb5 [ 28.183994] PM: Adding info for No Bus:ttyb6 [ 28.184048] PM: Adding info for No Bus:ttyb7 [ 28.184103] PM: Adding info for No Bus:ttyb8 [ 28.184163] PM: Adding info for No Bus:ttyb9 [ 28.184218] PM: Adding info for No Bus:ttyba [ 28.184273] PM: Adding info for No Bus:ttybb [ 28.184329] PM: Adding info for No Bus:ttybc [ 28.184385] PM: Adding info for No Bus:ttybd [ 28.184444] PM: Adding info for No Bus:ttybe [ 28.184507] PM: Adding info for No Bus:ttybf [ 28.184562] PM: Adding info for No Bus:ttyc0 [ 28.184617] PM: Adding info for No Bus:ttyc1 [ 28.184672] PM: Adding info for No Bus:ttyc2 [ 28.184730] PM: Adding info for No Bus:ttyc3 [ 28.184789] PM: Adding info for No Bus:ttyc4 [ 28.184852] PM: Adding info for No Bus:ttyc5 [ 28.184933] PM: Adding info for No Bus:ttyc6 [ 28.184989] PM: Adding info for No Bus:ttyc7 [ 28.185046] PM: Adding info for No Bus:ttyc8 [ 28.185105] PM: Adding info for No Bus:ttyc9 [ 28.185161] PM: Adding info for No Bus:ttyca [ 28.185223] PM: Adding info for No Bus:ttycb [ 28.185280] PM: Adding info for No Bus:ttycc [ 28.185336] PM: Adding info for No Bus:ttycd [ 28.185392] PM: Adding info for No Bus:ttyce [ 28.185449] PM: Adding info for No Bus:ttycf [ 28.185506] PM: Adding info for No Bus:ttyd0 [ 28.185568] PM: Adding info for No Bus:ttyd1 [ 28.185626] PM: Adding info for No Bus:ttyd2 [ 28.185685] PM: Adding info for No Bus:ttyd3 [ 28.185744] PM: Adding info for No Bus:ttyd4 [ 28.185801] PM: Adding info for No Bus:ttyd5 [ 28.185857] PM: Adding info for No Bus:ttyd6 [ 28.185945] PM: Adding info for No Bus:ttyd7 [ 28.186003] PM: Adding info for No Bus:ttyd8 [ 28.186061] PM: Adding info for No Bus:ttyd9 [ 28.186118] PM: Adding info for No Bus:ttyda [ 28.186175] PM: Adding info for No Bus:ttydb [ 28.186233] PM: Adding info for No Bus:ttydc [ 28.186297] PM: Adding info for No Bus:ttydd [ 28.186354] PM: Adding info for No Bus:ttyde [ 28.186414] PM: Adding info for No Bus:ttydf [ 28.186472] PM: Adding info for No Bus:ttye0 [ 28.186530] PM: Adding info for No Bus:ttye1 [ 28.186588] PM: Adding info for No Bus:ttye2 [ 28.186652] PM: Adding info for No Bus:ttye3 [ 28.186712] PM: Adding info for No Bus:ttye4 [ 28.186772] PM: Adding info for No Bus:ttye5 [ 28.186830] PM: Adding info for No Bus:ttye6 [ 28.186918] PM: Adding info for No Bus:ttye7 [ 28.186979] PM: Adding info for No Bus:ttye8 [ 28.187042] PM: Adding info for No Bus:ttye9 [ 28.187104] PM: Adding info for No Bus:ttyea [ 28.187161] PM: Adding info for No Bus:ttyeb [ 28.187221] PM: Adding info for No Bus:ttyec [ 28.187279] PM: Adding info for No Bus:ttyed [ 28.187338] PM: Adding info for No Bus:ttyee [ 28.187401] PM: Adding info for No Bus:ttyef [ 28.187455] PM: Adding info for No Bus:rtc [ 28.187497] Real Time Clock Driver v1.12ac [ 28.187504] PM: Adding info for No Bus:hpet [ 28.187602] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.187622] PM: Adding info for platform:serial8250 [ 28.187691] PM: Adding info for No Bus:ttyS0 [ 28.187774] PM: Adding info for No Bus:ttyS1 [ 28.187857] PM: Adding info for No Bus:ttyS2 [ 28.187962] PM: Adding info for No Bus:ttyS3 [ 28.188172] PM: Adding info for No Bus:isa [ 28.188725] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.188760] PM: Adding info for No Bus:lo [ 28.188896] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 28.188901] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 28.189114] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 28.189152] PM: Adding info for platform:i8042 [ 28.191605] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.191611] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 28.191635] PM: Adding info for serio:serio0 [ 28.191682] PM: Adding info for No Bus:psaux [ 28.191706] PM: Adding info for serio:serio1 [ 28.191737] mice: PS/2 mouse device common for all mice [ 28.191821] PM: Adding info for platform:eisa.0 [ 28.191849] EISA: Probing bus 0 at eisa.0 [ 28.191879] Cannot allocate resource for EISA slot 4 [ 28.191882] Cannot allocate resource for EISA slot 5 [ 28.191900] EISA: Detected 0 cards. [ 28.191985] TCP cubic registered [ 28.191991] NET: Registered protocol family 1 [ 28.192010] Using IPI No-Shortcut mode [ 28.192207] Magic number: 7:711:662 [ 28.192311] hash matches device ptyed [ 28.192868] Freeing unused kernel memory: 364k freed [ 28.192928] PM: Adding info for No Bus:vcs1 [ 28.192977] PM: Adding info for No Bus:vcsa1 [ 28.236878] input: AT Translated Set 2 keyboard as /class/input/input0 [ 28.270330] PM: Adding info for No Bus:vcs2 [ 28.270386] PM: Adding info for No Bus:vcsa2 [ 28.270706] PM: Removing info for No Bus:vcs2 [ 28.270742] PM: Removing info for No Bus:vcsa2 [ 28.272190] PM: Adding info for No Bus:vcs2 [ 28.272263] PM: Adding info for No Bus:vcsa2 [ 28.274090] PM: Removing info for No Bus:vcs2 [ 28.274131] PM: Removing info for No Bus:vcsa2 [ 28.275141] PM: Adding info for No Bus:vcs2 [ 28.275174] PM: Adding info for No Bus:vcsa2 [ 28.276064] PM: Removing info for No Bus:vcs2 [ 28.276111] PM: Removing info for No Bus:vcsa2 [ 28.276751] PM: Adding info for No Bus:vcs3 [ 28.276805] PM: Adding info for No Bus:vcsa3 [ 28.277126] PM: Removing info for No Bus:vcs3 [ 28.277158] PM: Removing info for No Bus:vcsa3 [ 28.278581] PM: Adding info for No Bus:vcs3 [ 28.278649] PM: Adding info for No Bus:vcsa3 [ 28.280461] PM: Removing info for No Bus:vcs3 [ 28.280500] PM: Removing info for No Bus:vcsa3 [ 28.281499] PM: Adding info for No Bus:vcs3 [ 28.281534] PM: Adding info for No Bus:vcsa3 [ 28.282431] PM: Removing info for No Bus:vcs3 [ 28.282476] PM: Removing info for No Bus:vcsa3 [ 28.283144] PM: Adding info for No Bus:vcs4 [ 28.283179] PM: Adding info for No Bus:vcsa4 [ 28.283494] PM: Removing info for No Bus:vcs4 [ 28.283525] PM: Removing info for No Bus:vcsa4 [ 28.284996] PM: Adding info for No Bus:vcs4 [ 28.285064] PM: Adding info for No Bus:vcsa4 [ 28.286894] PM: Removing info for No Bus:vcs4 [ 28.286935] PM: Removing info for No Bus:vcsa4 [ 28.287933] PM: Adding info for No Bus:vcs4 [ 28.287967] PM: Adding info for No Bus:vcsa4 [ 28.288872] PM: Removing info for No Bus:vcs4 [ 28.288916] PM: Removing info for No Bus:vcsa4 [ 28.289552] PM: Adding info for No Bus:vcs5 [ 28.289589] PM: Adding info for No Bus:vcsa5 [ 28.289914] PM: Removing info for No Bus:vcs5 [ 28.289946] PM: Removing info for No Bus:vcsa5 [ 28.291441] PM: Adding info for No Bus:vcs5 [ 28.291511] PM: Adding info for No Bus:vcsa5 [ 28.293336] PM: Removing info for No Bus:vcs5 [ 28.293378] PM: Removing info for No Bus:vcsa5 [ 28.294359] PM: Adding info for No Bus:vcs5 [ 28.294393] PM: Adding info for No Bus:vcsa5 [ 28.295280] PM: Removing info for No Bus:vcs5 [ 28.295327] PM: Removing info for No Bus:vcsa5 [ 28.295968] PM: Adding info for No Bus:vcs6 [ 28.296005] PM: Adding info for No Bus:vcsa6 [ 28.296321] PM: Removing info for No Bus:vcs6 [ 28.296354] PM: Removing info for No Bus:vcsa6 [ 28.297807] PM: Adding info for No Bus:vcs6 [ 28.297876] PM: Adding info for No Bus:vcsa6 [ 28.299694] PM: Removing info for No Bus:vcs6 [ 28.299735] PM: Removing info for No Bus:vcsa6 [ 28.300742] PM: Adding info for No Bus:vcs6 [ 28.300788] PM: Adding info for No Bus:vcsa6 [ 28.301670] PM: Removing info for No Bus:vcs6 [ 28.301715] PM: Removing info for No Bus:vcsa6 [ 28.455004] md: raid1 personality registered for level 1 [ 28.956976] usbcore: registered new interface driver usbfs [ 28.957012] usbcore: registered new interface driver hub [ 28.957044] usbcore: registered new device driver usb [ 28.957064] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 28.957455] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 28.957465] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 16 [ 28.957472] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 28.959328] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 29.210883] SCSI subsystem initialized [ 29.227966] libata version 2.21 loaded. [ 29.468829] PM: Adding info for No Bus:eth0 [ 29.468877] eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0 [ 29.469363] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 29.469373] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 17 [ 29.469387] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 29.469391] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 29.469575] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 29.469595] ohci_hcd 0000:00:02.0: irq 17, io mem 0xe0001000 [ 29.521602] PM: Adding info for usb:usb1 [ 29.521673] PM: Adding info for No Bus:usbdev1.1_ep00 [ 29.521692] usb usb1: configuration #1 chosen from 1 choice [ 29.521702] PM: Adding info for usb:1-0:1.0 [ 29.521725] hub 1-0:1.0: USB hub found [ 29.521737] hub 1-0:1.0: 4 ports detected [ 29.622479] PM: Adding info for No Bus:usbdev1.1_ep81 [ 29.622512] PM: Adding info for No Bus:usbdev1.1 [ 29.622900] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [ 29.622905] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 16 [ 29.622922] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 29.622926] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 29.622951] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 29.622969] ohci_hcd 0000:00:02.1: irq 16, io mem 0xe0002000 [ 29.675442] PM: Adding info for usb:usb2 [ 29.675490] PM: Adding info for No Bus:usbdev2.1_ep00 [ 29.675506] usb usb2: configuration #1 chosen from 1 choice [ 29.675515] PM: Adding info for usb:2-0:1.0 [ 29.675535] hub 2-0:1.0: USB hub found [ 29.675546] hub 2-0:1.0: 4 ports detected [ 29.776329] PM: Adding info for No Bus:usbdev2.1_ep81 [ 29.776361] PM: Adding info for No Bus:usbdev2.1 [ 29.777019] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 29.777024] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 17 [ 29.777037] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 29.777041] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 29.777067] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 29.777104] ehci_hcd 0000:00:02.2: debug port 1 [ 29.777109] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 29.777116] ehci_hcd 0000:00:02.2: irq 17, io mem 0xe0003000 [ 29.777124] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.777153] PM: Adding info for usb:usb3 [ 29.777194] PM: Adding info for No Bus:usbdev3.1_ep00 [ 29.777210] usb usb3: configuration #1 chosen from 1 choice [ 29.777219] PM: Adding info for usb:3-0:1.0 [ 29.777244] hub 3-0:1.0: USB hub found [ 29.777254] hub 3-0:1.0: 8 ports detected [ 29.877252] PM: Adding info for No Bus:usbdev3.1_ep81 [ 29.877298] PM: Adding info for No Bus:usbdev3.1 [ 29.877459] NFORCE2-U400R: IDE controller at PCI slot 0000:00:09.0 [ 29.877581] NFORCE2-U400R: chipset revision 163 [ 29.877584] NFORCE2-U400R: not 100% native mode: will probe irqs later [ 29.877592] NFORCE2-U400R: 0000:00:09.0 (rev a3) UDMA133 controller [ 29.877602] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 29.877615] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 29.877625] Probing IDE interface ide0... [ 30.395716] Probing IDE interface ide1... [ 30.917915] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 30.917927] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 18 [ 30.917957] PM: Adding info for ieee1394:fw-host0 [ 30.971184] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[dd042000-dd0427ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 30.978577] sata_promise 0000:02:07.0: version 2.07 [ 30.978595] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 18 [ 30.978675] sata_promise 0000:02:07.0: applying SATAII TX4 port numbering workaround [ 30.982233] scsi0 : sata_promise [ 30.982249] PM: Adding info for No Bus:host0 [ 30.982501] scsi1 : sata_promise [ 30.982508] PM: Adding info for No Bus:host1 [ 30.982999] scsi2 : sata_promise [ 30.983009] PM: Adding info for No Bus:host2 [ 30.983181] scsi3 : sata_promise [ 30.983188] PM: Adding info for No Bus:host3 [ 30.983210] ata1: SATA max UDMA/133 cmd 0xf889c380 ctl 0xf889c3b8 bmdma 0x00000000 irq 18 [ 30.983215] ata2: SATA max UDMA/133 cmd 0xf889c280 ctl 0xf889c2b8 bmdma 0x00000000 irq 18 [ 30.983220] ata3: SATA max UDMA/133 cmd 0xf889c200 ctl 0xf889c238 bmdma 0x00000000 irq 18 [ 30.983225] ata4: SATA max UDMA/133 cmd 0xf889c300 ctl 0xf889c338 bmdma 0x00000000 irq 18 [ 31.436720] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.441009] ata1.00: ATA-7: Maxtor 6L300S0, BACE1G20, max UDMA/133 [ 31.441012] ata1.00: 586114704 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 31.447990] ata1.00: configured for UDMA/133 [ 31.901267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.905569] ata2.00: ATA-7: Maxtor 7L300S0, BANC1G10, max UDMA/133 [ 31.905572] ata2.00: 586114704 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 31.912547] ata2.00: configured for UDMA/133 [ 32.234987] PM: Adding info for ieee1394:0010dc00006b62f0 [ 32.235037] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00006b62f0] [ 32.365821] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.370094] ata3.00: ATA-7: Maxtor 7L300S0, BANC1G10, max UDMA/133 [ 32.370098] ata3.00: 586114704 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 32.377071] ata3.00: configured for UDMA/133 [ 32.830366] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.834642] ata4.00: ATA-7: Maxtor 7L300S0, BANC1G10, max UDMA/133 [ 32.834645] ata4.00: 586114704 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 32.841625] ata4.00: configured for UDMA/133 [ 32.841646] PM: Adding info for No Bus:target0:0:0 [ 32.841731] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L300S0 BACE PQ: 0 ANSI: 5 [ 32.841740] PM: Adding info for scsi:0:0:0:0 [ 32.841795] PM: Adding info for No Bus:target1:0:0 [ 32.842069] scsi 1:0:0:0: Direct-Access ATA Maxtor 7L300S0 BANC PQ: 0 ANSI: 5 [ 32.842076] PM: Adding info for scsi:1:0:0:0 [ 32.842114] PM: Adding info for No Bus:target2:0:0 [ 32.842341] scsi 2:0:0:0: Direct-Access ATA Maxtor 7L300S0 BANC PQ: 0 ANSI: 5 [ 32.842349] PM: Adding info for scsi:2:0:0:0 [ 32.842388] PM: Adding info for No Bus:target3:0:0 [ 32.842610] scsi 3:0:0:0: Direct-Access ATA Maxtor 7L300S0 BANC PQ: 0 ANSI: 5 [ 32.842618] PM: Adding info for scsi:3:0:0:0 [ 32.842895] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 32.842903] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 19 [ 32.842987] sata_promise 0000:02:08.0: applying SATAII TX4 port numbering workaround [ 32.843254] scsi4 : sata_promise [ 32.843262] PM: Adding info for No Bus:host4 [ 32.843398] scsi5 : sata_promise [ 32.843411] PM: Adding info for No Bus:host5 [ 32.843540] scsi6 : sata_promise [ 32.843546] PM: Adding info for No Bus:host6 [ 32.843672] scsi7 : sata_promise [ 32.843679] PM: Adding info for No Bus:host7 [ 32.843700] ata5: SATA max UDMA/133 cmd 0xf88a0380 ctl 0xf88a03b8 bmdma 0x00000000 irq 19 [ 32.843705] ata6: SATA max UDMA/133 cmd 0xf88a0280 ctl 0xf88a02b8 bmdma 0x00000000 irq 19 [ 32.843709] ata7: SATA max UDMA/133 cmd 0xf88a0200 ctl 0xf88a0238 bmdma 0x00000000 irq 19 [ 32.843714] ata8: SATA max UDMA/133 cmd 0xf88a0300 ctl 0xf88a0338 bmdma 0x00000000 irq 19 [ 33.296915] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 33.350663] ata5.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133 [ 33.350667] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 33.425564] ata5.00: configured for UDMA/133 [ 33.878349] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 33.930845] ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 [ 33.930849] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 34.005752] ata6.00: configured for UDMA/133 [ 34.458786] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 34.503267] ata7.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133 [ 34.503270] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 34.578175] ata7.00: configured for UDMA/133 [ 35.031231] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 35.075420] ata8.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 [ 35.075424] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 35.150317] ata8.00: configured for UDMA/133 [ 35.150335] PM: Adding info for No Bus:target4:0:0 [ 35.150418] scsi 4:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 35.150427] PM: Adding info for scsi:4:0:0:0 [ 35.150490] PM: Adding info for No Bus:target5:0:0 [ 35.150789] scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 35.150796] PM: Adding info for scsi:5:0:0:0 [ 35.150835] PM: Adding info for No Bus:target6:0:0 [ 35.151079] scsi 6:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 35.151086] PM: Adding info for scsi:6:0:0:0 [ 35.151132] PM: Adding info for No Bus:target7:0:0 [ 35.151378] scsi 7:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 35.151386] PM: Adding info for scsi:7:0:0:0 [ 35.151757] sata_nv 0000:00:0b.0: version 3.4 [ 35.152187] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 35.152196] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 20 [ 35.152254] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 35.154091] scsi8 : sata_nv [ 35.154111] PM: Adding info for No Bus:host8 [ 35.154436] scsi9 : sata_nv [ 35.154445] PM: Adding info for No Bus:host9 [ 35.154468] ata9: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001cc00 irq 20 [ 35.154472] ata10: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001cc08 irq 20 [ 35.167096] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB) [ 35.168090] sd 0:0:0:0: [sda] Write Protect is off [ 35.168093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.170090] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.172098] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB) [ 35.173082] sd 0:0:0:0: [sda] Write Protect is off [ 35.173086] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.173244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.173250] sda: [ 35.194411] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.194729] sd 1:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB) [ 35.194742] sd 1:0:0:0: [sdb] Write Protect is off [ 35.194745] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 35.194759] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.194806] sd 1:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB) [ 35.194814] sd 1:0:0:0: [sdb] Write Protect is off [ 35.194817] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 35.194829] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.194833] sdb: sdb1 [ 35.214983] sd 1:0:0:0: [sdb] Attached SCSI disk [ 35.215342] sd 2:0:0:0: [sdc] 586114704 512-byte hardware sectors (300091 MB) [ 35.215352] sd 2:0:0:0: [sdc] Write Protect is off [ 35.215355] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 35.215367] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.215404] sd 2:0:0:0: [sdc] 586114704 512-byte hardware sectors (300091 MB) [ 35.215413] sd 2:0:0:0: [sdc] Write Protect is off [ 35.215415] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 35.215427] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.215430] sdc: [ 35.238736] sd 2:0:0:0: [sdc] Attached SCSI disk [ 35.238993] sd 3:0:0:0: [sdd] 586114704 512-byte hardware sectors (300091 MB) [ 35.239005] sd 3:0:0:0: [sdd] Write Protect is off [ 35.239008] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 35.239021] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.239053] sd 3:0:0:0: [sdd] 586114704 512-byte hardware sectors (300091 MB) [ 35.239061] sd 3:0:0:0: [sdd] Write Protect is off [ 35.239064] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 35.239075] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.239078] sdd: [ 35.262091] sd 3:0:0:0: [sdd] Attached SCSI disk [ 35.262356] sd 4:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 35.262365] sd 4:0:0:0: [sde] Write Protect is off [ 35.262368] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 35.262380] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.262415] sd 4:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 35.262423] sd 4:0:0:0: [sde] Write Protect is off [ 35.262426] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 35.262437] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.262441] sde: [ 35.279610] sd 4:0:0:0: [sde] Attached SCSI disk [ 35.279913] sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB) [ 35.279924] sd 5:0:0:0: [sdf] Write Protect is off [ 35.279927] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 35.279939] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.279980] sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB) [ 35.279989] sd 5:0:0:0: [sdf] Write Protect is off [ 35.279991] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 35.280003] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.280007] sdf: sdf1 [ 35.293853] sd 5:0:0:0: [sdf] Attached SCSI disk [ 35.294274] sd 6:0:0:0: [sdg] 976773168 512-byte hardware sectors (500108 MB) [ 35.294284] sd 6:0:0:0: [sdg] Write Protect is off [ 35.294287] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 35.294299] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.294328] sd 6:0:0:0: [sdg] 976773168 512-byte hardware sectors (500108 MB) [ 35.294336] sd 6:0:0:0: [sdg] Write Protect is off [ 35.294339] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 35.294351] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.294354] sdg: sdg1 [ 35.308612] sd 6:0:0:0: [sdg] Attached SCSI disk [ 35.309055] sd 7:0:0:0: [sdh] 976773168 512-byte hardware sectors (500108 MB) [ 35.309065] sd 7:0:0:0: [sdh] Write Protect is off [ 35.309068] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 35.309080] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.309117] sd 7:0:0:0: [sdh] 976773168 512-byte hardware sectors (500108 MB) [ 35.309125] sd 7:0:0:0: [sdh] Write Protect is off [ 35.309128] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 35.309139] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.309142] sdh: sdh1 [ 35.323112] sd 7:0:0:0: [sdh] Attached SCSI disk [ 35.328051] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 35.328074] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 35.328103] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 35.328125] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 35.328147] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 35.328167] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 35.328187] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 35.328208] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 35.598498] md: md0 stopped. [ 35.607686] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.611825] ata9.00: ATA-7: Maxtor 6L080M0, BACE1G10, max UDMA/133 [ 35.611831] ata9.00: 160086528 sectors, multi 16: LBA NCQ (depth 0/32) [ 35.618822] ata9.00: configured for UDMA/133 [ 35.775123] md: md1 stopped. [ 35.848419] md: md2 stopped. [ 35.926715] md: bind<sdf1> [ 35.926838] md: bind<sdg1> [ 35.926954] md: bind<sdh1> [ 35.952680] md: md0 stopped. [ 35.956484] md: md1 stopped. [ 35.959744] md: md2 stopped. [ 36.072210] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 36.076314] ata10.00: ATA-7: Maxtor 6L080M0, BACE1G10, max UDMA/133 [ 36.076318] ata10.00: 160086528 sectors, multi 16: LBA NCQ (depth 0/32) [ 36.083295] ata10.00: configured for UDMA/133 [ 36.083323] PM: Adding info for No Bus:target8:0:0 [ 36.083413] scsi 8:0:0:0: Direct-Access ATA Maxtor 6L080M0 BACE PQ: 0 ANSI: 5 [ 36.083422] PM: Adding info for scsi:8:0:0:0 [ 36.083734] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 36.083747] sd 8:0:0:0: [sdi] Write Protect is off [ 36.083750] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 36.083763] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.083813] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 36.083821] sd 8:0:0:0: [sdi] Write Protect is off [ 36.083824] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 36.083835] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.083839] sdi: sdi1 sdi2 sdi3 [ 36.100831] sd 8:0:0:0: [sdi] Attached SCSI disk [ 36.100872] sd 8:0:0:0: Attached scsi generic sg8 type 0 [ 36.100892] PM: Adding info for No Bus:target9:0:0 [ 36.101446] scsi 9:0:0:0: Direct-Access ATA Maxtor 6L080M0 BACE PQ: 0 ANSI: 5 [ 36.101454] PM: Adding info for scsi:9:0:0:0 [ 36.101676] sd 9:0:0:0: [sdj] 160086528 512-byte hardware sectors (81964 MB) [ 36.101686] sd 9:0:0:0: [sdj] Write Protect is off [ 36.101688] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 36.101701] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.101731] sd 9:0:0:0: [sdj] 160086528 512-byte hardware sectors (81964 MB) [ 36.101739] sd 9:0:0:0: [sdj] Write Protect is off [ 36.101742] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 36.101753] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.101757] sdj: sdj1 sdj2 sdj3 [ 36.124646] sd 9:0:0:0: [sdj] Attached SCSI disk [ 36.124675] sd 9:0:0:0: Attached scsi generic sg9 type 0 [ 36.235444] md: md0 stopped. [ 36.301113] md: bind<sdi1> [ 36.301179] md: md1 stopped. [ 36.322642] md: md2 stopped. [ 36.386697] md: md0 stopped. [ 36.386712] md: unbind<sdi1> [ 36.386719] md: export_rdev(sdi1) [ 36.391512] md: bind<sdj1> [ 36.391654] md: bind<sdi1> [ 36.399783] raid1: raid set md0 active with 2 out of 2 mirrors [ 36.400238] md: md1 stopped. [ 36.431283] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 36.431340] ata9.00: cmd c8/00:08:20:7f:8a/00:00:00:00:00/e9 tag 0 cdb 0x0 data 4096 in [ 36.431342] res d0/00:08:20:7f:8a/00:00:00:00:00/e9 Emask 0x12 (ATA bus error) [ 36.431395] ata9: hard resetting port [ 39.492878] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 39.503972] ata9.00: configured for UDMA/133 [ 39.503981] ata9: EH pending after completion, repeating EH (cnt=4) [ 39.503992] ata9: EH complete [ 39.536434] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 39.549629] sd 8:0:0:0: [sdi] Write Protect is off [ 39.549633] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 39.560459] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 39.560868] md: bind<sdj2> [ 39.561013] md: bind<sdi2> [ 39.569050] raid1: raid set md1 active with 2 out of 2 mirrors [ 39.569501] md: md2 stopped. [ 39.638585] Attempting manual resume [ 39.638590] swsusp: Resume From Partition 9:1 [ 39.638592] PM: Checking swsusp image. [ 39.638746] PM: Resume from disk failed. [ 39.672044] md: bind<sdj3> [ 39.672431] md: bind<sdi3> [ 39.680582] raid1: raid set md2 active with 2 out of 2 mirrors [ 39.781675] kjournald starting. Commit interval 5 seconds [ 39.781688] EXT3-fs: mounted filesystem with ordered data mode. [ 39.856111] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 39.856167] ata9.00: cmd c8/00:08:4f:00:cc/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in [ 39.856169] res d0/00:08:4f:00:cc/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 39.856222] ata9: hard resetting port [ 42.968501] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 42.979596] ata9.00: configured for UDMA/133 [ 42.979604] ata9: EH complete [ 43.001176] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 43.001189] sd 8:0:0:0: [sdi] Write Protect is off [ 43.001191] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 43.001205] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 43.155335] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 43.155395] ata9: hard resetting port [ 46.217349] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 46.228464] ata9.00: configured for UDMA/133 [ 46.228468] ata9: EH pending after completion, repeating EH (cnt=4) [ 46.228475] ata9: EH complete [ 46.245087] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 46.245172] sd 8:0:0:0: [sdi] Write Protect is off [ 46.245175] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 46.245190] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.413512] PM: Removing info for No Bus:vcs1 [ 46.413543] PM: Removing info for No Bus:vcsa1 [ 46.413594] PM: Adding info for No Bus:vcs1 [ 46.413606] PM: Adding info for No Bus:vcsa1 [ 46.512516] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 46.512574] ata9: hard resetting port [ 49.574092] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 49.585194] ata9.00: configured for UDMA/133 [ 49.585197] ata9: EH pending after completion, repeating EH (cnt=4) [ 49.585205] ata9: EH complete [ 49.609188] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 49.609202] sd 8:0:0:0: [sdi] Write Protect is off [ 49.609205] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 49.609219] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.645457] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 49.645508] ata9.00: cmd c8/00:20:77:c9:cc/00:00:00:00:00/e0 tag 0 cdb 0x0 data 16384 in [ 49.645510] res d0/00:20:77:c9:cc/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 49.645559] ata9: hard resetting port [ 52.707051] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 52.718147] ata9.00: configured for UDMA/133 [ 52.718153] ata9: EH complete [ 52.736320] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 52.736728] sd 8:0:0:0: [sdi] Write Protect is off [ 52.736731] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 52.737307] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 52.786576] ata9.00: limiting speed to UDMA/100:PIO4 [ 52.786581] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 52.786639] ata9.00: cmd c8/00:08:57:00:c8/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in [ 52.786641] res d0/00:08:57:00:c8/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 52.786704] ata9: hard resetting port [ 55.848004] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 55.859109] ata9.00: configured for UDMA/100 [ 55.859115] ata9: EH complete [ 55.878479] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 55.878490] sd 8:0:0:0: [sdi] Write Protect is off [ 55.878493] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 55.878505] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 55.944394] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 55.944462] ata9: hard resetting port [ 59.005941] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 59.017055] ata9.00: configured for UDMA/100 [ 59.017058] ata9: EH pending after completion, repeating EH (cnt=4) [ 59.017066] ata9: EH complete [ 59.036576] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 59.036688] sd 8:0:0:0: [sdi] Write Protect is off [ 59.036691] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 59.036706] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 59.095618] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 59.095690] ata9: hard resetting port [ 62.156885] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 62.167982] ata9.00: configured for UDMA/100 [ 62.167986] ata9: EH pending after completion, repeating EH (cnt=4) [ 62.167994] ata9: EH complete [ 62.191307] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 62.191435] sd 8:0:0:0: [sdi] Write Protect is off [ 62.191438] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 62.191453] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.419103] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 62.419171] ata9.00: cmd c8/00:08:6f:02:cb/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in [ 62.419173] res d0/00:08:6f:02:cb/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 62.419238] ata9: hard resetting port [ 65.531608] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 65.542708] ata9.00: configured for UDMA/100 [ 65.542715] ata9: EH complete [ 65.564623] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 65.564636] sd 8:0:0:0: [sdi] Write Protect is off [ 65.564639] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 65.564653] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.581045] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 65.581110] ata9.00: cmd c8/00:08:ef:81:8e/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in [ 65.581112] res d0/00:08:ef:81:8e/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 65.581176] ata9: hard resetting port [ 68.693540] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 68.704639] ata9.00: configured for UDMA/100 [ 68.704646] ata9: EH complete [ 68.726029] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 68.726039] sd 8:0:0:0: [sdi] Write Protect is off [ 68.726041] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 68.726054] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.785912] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 68.785977] ata9: hard resetting port [ 71.847480] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 71.858593] ata9.00: configured for UDMA/100 [ 71.858596] ata9: EH pending after completion, repeating EH (cnt=4) [ 71.858603] ata9: EH complete [ 71.876673] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 71.876748] sd 8:0:0:0: [sdi] Write Protect is off [ 71.876751] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 71.876765] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 71.998202] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 71.998274] ata9.00: cmd c8/00:10:af:00:57/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8192 in [ 71.998276] res d0/00:10:af:00:57/00:00:00:00:00/e1 Emask 0x12 (ATA bus error) [ 71.998350] ata9: hard resetting port [ 76.232226] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 76.243321] ata9.00: configured for UDMA/100 [ 76.243329] ata9: EH complete [ 76.260247] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 76.260267] sd 8:0:0:0: [sdi] Write Protect is off [ 76.260270] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 76.260284] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 76.299685] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 76.299757] ata9: hard resetting port [ 79.361192] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 79.372287] ata9.00: configured for UDMA/100 [ 79.372292] ata9: EH pending after completion, repeating EH (cnt=4) [ 79.372301] ata9: EH complete [ 79.391525] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 79.391809] sd 8:0:0:0: [sdi] Write Protect is off [ 79.391812] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 79.391827] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 79.428599] PM: Adding info for No Bus:vcs2 [ 79.428630] PM: Adding info for No Bus:vcsa2 [ 79.429551] PM: Removing info for No Bus:vcs2 [ 79.429572] PM: Removing info for No Bus:vcsa2 [ 79.429683] PM: Adding info for No Bus:vcs3 [ 79.429695] PM: Adding info for No Bus:vcsa3 [ 79.430573] PM: Removing info for No Bus:vcs3 [ 79.430592] PM: Removing info for No Bus:vcsa3 [ 79.430703] PM: Adding info for No Bus:vcs4 [ 79.430715] PM: Adding info for No Bus:vcsa4 [ 79.431605] PM: Removing info for No Bus:vcs4 [ 79.431625] PM: Removing info for No Bus:vcsa4 [ 79.431736] PM: Adding info for No Bus:vcs5 [ 79.431750] PM: Adding info for No Bus:vcsa5 [ 79.432623] PM: Removing info for No Bus:vcs5 [ 79.432642] PM: Removing info for No Bus:vcsa5 [ 79.432753] PM: Adding info for No Bus:vcs6 [ 79.432765] PM: Adding info for No Bus:vcsa6 [ 79.433666] PM: Removing info for No Bus:vcs6 [ 79.433687] PM: Removing info for No Bus:vcsa6 [ 79.580360] ata9.00: limiting speed to UDMA/33:PIO4 [ 79.580366] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 79.580433] ata9.00: cmd c8/00:08:c7:04:cb/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in [ 79.580435] res d0/00:08:c7:04:cb/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 79.580499] ata9: hard resetting port [ 82.692957] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 82.704059] ata9.00: configured for UDMA/33 [ 82.704066] ata9: EH complete [ 82.721686] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 82.721699] sd 8:0:0:0: [sdi] Write Protect is off [ 82.721702] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 82.721715] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 82.760245] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 82.760306] ata9: hard resetting port [ 85.821919] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 85.833018] ata9.00: configured for UDMA/33 [ 85.833021] ata9: EH pending after completion, repeating EH (cnt=4) [ 85.833027] ata9: EH complete [ 85.850730] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 85.850819] sd 8:0:0:0: [sdi] Write Protect is off [ 85.850822] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 85.850836] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 85.856381] ata9: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 85.856442] ata9: hard resetting port [ 88.968866] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 88.979983] ata9.00: configured for UDMA/33 [ 88.979986] ata9: EH pending after completion, repeating EH (cnt=4) [ 88.979992] ata9: EH complete [ 88.999165] sd 8:0:0:0: [sdi] 160086528 512-byte hardware sectors (81964 MB) [ 88.999232] sd 8:0:0:0: [sdi] Write Protect is off [ 88.999235] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 88.999248] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 89.026219] ata9.00: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0x2 frozen [ 89.026281] ata9.00: cmd c8/00:08:af:fb:90/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in [ 89.026283] res d0/00:08:af:fb:90/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 89.026343] ata9: hard resetting port [ 94.943058] ata9: port is slow to respond, please be patient (Status 0x80) [ 99.019103] ata9: COMRESET failed (errno=-16) [ 99.019151] ata9: hard resetting port [ 104.936361] ata9: port is slow to respond, please be patient (Status 0x80) [ 109.012407] ata9: COMRESET failed (errno=-16) [ 109.012455] ata9: hard resetting port [ 114.929666] ata9: port is slow to respond, please be patient (Status 0x80) [ 144.022439] ata9: COMRESET failed (errno=-16) [ 144.022487] ata9: hard resetting port [ 149.022588] ata9: COMRESET failed (errno=-16) [ 149.022636] ata9: reset failed, giving up [ 149.022682] ata9.00: disabled [ 149.022687] ata9: EH complete [ 149.022694] sd 8:0:0:0: [sdi] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 149.022699] end_request: I/O error, dev sdi, sector 9501615 [ 149.022703] raid1: sdi1: rescheduling sector 9501552 [ 149.022763] sd 8:0:0:0: [sdi] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 149.022767] end_request: I/O error, dev sdi, sector 9501615 [ 149.041297] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 149.041358] ata9: hard resetting port [ 149.041366] sd 8:0:0:0: rejecting I/O to offline device [ 149.041417] raid1: Disk failure on sdi1, disabling device. [ 149.041419] Operation continuing on 1 devices [ 149.041470] raid1: sdj1: redirecting sector 9501552 to another mirror [ 149.068353] RAID1 conf printout: [ 149.068356] --- wd:1 rd:2 [ 149.068358] disk 0, wo:1, o:0, dev:sdi1 [ 149.068360] disk 1, wo:0, o:1, dev:sdj1 [ 149.070540] RAID1 conf printout: [ 149.070542] --- wd:1 rd:2 [ 149.070544] disk 1, wo:0, o:1, dev:sdj1 [ 151.326322] NET: Registered protocol family 10 [ 151.326398] lo: Disabled Privacy Extensions [ 151.489934] Linux agpgart interface v0.102 (c) Dave Jones [ 151.513892] agpgart: Detected NVIDIA nForce2 chipset [ 151.518072] PM: Adding info for No Bus:agpgart [ 151.518109] agpgart: AGP aperture is 64M @ 0xd8000000 [ 151.643849] sd 8:0:0:0: rejecting I/O to offline device [ 151.643915] raid1: sdi2: rescheduling sector 5863424 [ 151.643974] sd 8:0:0:0: rejecting I/O to offline device [ 151.654485] sd 8:0:0:0: rejecting I/O to offline device [ 151.654546] raid1: Disk failure on sdi2, disabling device. [ 151.654548] Operation continuing on 1 devices [ 151.654603] raid1: sdj2: redirecting sector 5863424 to another mirror [ 151.729053] RAID1 conf printout: [ 151.729060] --- wd:1 rd:2 [ 151.729063] disk 0, wo:1, o:0, dev:sdi2 [ 151.729065] disk 1, wo:0, o:1, dev:sdj2 [ 151.732263] RAID1 conf printout: [ 151.732267] --- wd:1 rd:2 [ 151.732270] disk 1, wo:0, o:1, dev:sdj2 [ 151.770927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 151.789575] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 151.829913] input: PC Speaker as /class/input/input1 [ 151.844519] PM: Adding info for No Bus:i2c-0 [ 151.844536] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 151.844554] PM: Adding info for No Bus:i2c-1 [ 151.844566] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100 [ 151.925743] sd 8:0:0:0: rejecting I/O to offline device [ 151.925803] raid1: sdi3: rescheduling sector 130768768 [ 151.925862] sd 8:0:0:0: rejecting I/O to offline device [ 151.971676] sd 8:0:0:0: rejecting I/O to offline device [ 151.971737] raid1: Disk failure on sdi3, disabling device. [ 151.971739] Operation continuing on 1 devices [ 151.971795] raid1: sdj3: redirecting sector 130768768 to another mirror [ 152.042887] RAID1 conf printout: [ 152.042894] --- wd:1 rd:2 [ 152.042897] disk 0, wo:1, o:0, dev:sdi3 [ 152.042900] disk 1, wo:0, o:1, dev:sdj3 [ 152.045586] RAID1 conf printout: [ 152.045589] --- wd:1 rd:2 [ 152.045591] disk 1, wo:0, o:1, dev:sdj3 [ 152.381479] PM: Adding info for No Bus:timer [ 152.421112] PM: Adding info for No Bus:seq [ 152.555571] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 [ 152.871898] PM: Adding info for No Bus:sequencer [ 152.871921] PM: Adding info for No Bus:sequencer2 [ 153.061288] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 [ 153.061295] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 16 [ 153.061323] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 153.372275] intel8x0_measure_ac97_clock: measured 50702 usecs [ 153.372279] intel8x0: clocking to 47410 [ 153.372311] PM: Adding info for No Bus:pcmC0D2p [ 153.372351] PM: Adding info for No Bus:pcmC0D1c [ 153.372372] PM: Adding info for No Bus:adsp [ 153.372389] PM: Adding info for No Bus:pcmC0D0p [ 153.372407] PM: Adding info for No Bus:pcmC0D0c [ 153.372425] PM: Adding info for No Bus:dsp [ 153.372443] PM: Adding info for No Bus:audio [ 153.372468] PM: Adding info for ac97:0-0:ALC655 [ 153.372489] PM: Adding info for No Bus:controlC0 [ 153.372512] PM: Adding info for No Bus:mixer [ 154.957735] ata9: port is slow to respond, please be patient (Status 0x80) [ 159.033776] ata9: COMRESET failed (errno=-16) [ 159.033832] ata9: hard resetting port [ 162.081813] eth0: no IPv6 routers present [ 164.951029] ata9: port is slow to respond, please be patient (Status 0x80) [ 169.027071] ata9: COMRESET failed (errno=-16) [ 169.027126] ata9: hard resetting port [ 174.944325] ata9: port is slow to respond, please be patient (Status 0x80) [ 204.037071] ata9: COMRESET failed (errno=-16) [ 204.037128] ata9: hard resetting port [ 209.037216] ata9: COMRESET failed (errno=-16) [ 209.037271] ata9: reset failed, giving up [ 209.037320] ata9: EH pending after completion, repeating EH (cnt=4) [ 209.037329] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 209.037395] ata9: hard resetting port [ 214.954468] ata9: port is slow to respond, please be patient (Status 0x80) [ 219.030510] ata9: COMRESET failed (errno=-16) [ 219.030564] ata9: hard resetting port [ 224.947765] ata9: port is slow to respond, please be patient (Status 0x80) [ 229.023806] ata9: COMRESET failed (errno=-16) [ 229.023861] ata9: hard resetting port [ 234.941060] ata9: port is slow to respond, please be patient (Status 0x80) [ 264.033807] ata9: COMRESET failed (errno=-16) [ 264.033864] ata9: hard resetting port [ 269.033950] ata9: COMRESET failed (errno=-16) [ 269.034004] ata9: reset failed, giving up [ 269.034057] ata9: EH complete [ 269.034068] ata9.00: detaching (SCSI 8:0:0:0) [ 269.034267] sd 8:0:0:0: [sdi] Synchronizing SCSI cache [ 269.036966] sd 8:0:0:0: [sdi] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 269.036974] sd 8:0:0:0: [sdi] Stopping disk [ 269.037094] sd 8:0:0:0: [sdi] START_STOP FAILED [ 269.037096] sd 8:0:0:0: [sdi] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 269.037104] PM: Removing info for scsi:8:0:0:0 [ 269.054392] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 269.054466] ata9: hard resetting port [ 269.496617] PM: Adding info for platform:parport_pc.956 [ 269.496673] PM: Removing info for platform:parport_pc.956 [ 269.496688] PM: Adding info for platform:parport_pc.888 [ 269.496734] PM: Removing info for platform:parport_pc.888 [ 269.496742] PM: Adding info for platform:parport_pc.632 [ 269.496787] PM: Removing info for platform:parport_pc.632 [ 269.499706] lp: driver loaded but no devices found [ 269.691033] Adding 2931768k swap on /dev/disk/by-uuid/c1a193d2-4bc9-47a0-bb12-80c4cf2b43b1. Priority:-1 extents:1 across:2931768k [ 269.807964] EXT3 FS on md0, internal journal [ 270.265341] kjournald starting. Commit interval 5 seconds [ 270.265497] EXT3 FS on md2, internal journal [ 270.265503] EXT3-fs: mounted filesystem with ordered data mode. [ 271.004888] PM: Adding info for No Bus:vcs2 [ 271.004913] PM: Adding info for No Bus:vcsa2 [ 271.007632] PM: Removing info for No Bus:vcs2 [ 271.007661] PM: Removing info for No Bus:vcsa2 [ 271.010814] PM: Adding info for No Bus:vcs2 [ 271.010841] PM: Adding info for No Bus:vcsa2 [ 271.015136] PM: Removing info for No Bus:vcs2 [ 271.015166] PM: Removing info for No Bus:vcsa2 [ 271.017430] PM: Adding info for No Bus:vcs3 [ 271.017455] PM: Adding info for No Bus:vcsa3 [ 271.020131] PM: Removing info for No Bus:vcs3 [ 271.020161] PM: Removing info for No Bus:vcsa3 [ 271.023330] PM: Adding info for No Bus:vcs3 [ 271.023358] PM: Adding info for No Bus:vcsa3 [ 271.027609] PM: Removing info for No Bus:vcs3 [ 271.027638] PM: Removing info for No Bus:vcsa3 [ 271.029900] PM: Adding info for No Bus:vcs4 [ 271.029926] PM: Adding info for No Bus:vcsa4 [ 271.032599] PM: Removing info for No Bus:vcs4 [ 271.032629] PM: Removing info for No Bus:vcsa4 [ 271.035778] PM: Adding info for No Bus:vcs4 [ 271.035806] PM: Adding info for No Bus:vcsa4 [ 271.040086] PM: Removing info for No Bus:vcs4 [ 271.040117] PM: Removing info for No Bus:vcsa4 [ 271.042383] PM: Adding info for No Bus:vcs5 [ 271.042408] PM: Adding info for No Bus:vcsa5 [ 271.045079] PM: Removing info for No Bus:vcs5 [ 271.045109] PM: Removing info for No Bus:vcsa5 [ 271.048265] PM: Adding info for No Bus:vcs5 [ 271.048291] PM: Adding info for No Bus:vcsa5 [ 271.052548] PM: Removing info for No Bus:vcs5 [ 271.052578] PM: Removing info for No Bus:vcsa5 [ 271.054837] PM: Adding info for No Bus:vcs6 [ 271.054862] PM: Adding info for No Bus:vcsa6 [ 271.057551] PM: Removing info for No Bus:vcs6 [ 271.057580] PM: Removing info for No Bus:vcsa6 [ 271.060735] PM: Adding info for No Bus:vcs6 [ 271.060762] PM: Adding info for No Bus:vcsa6 [ 271.065015] PM: Removing info for No Bus:vcs6 [ 271.065045] PM: Removing info for No Bus:vcsa6 [ 271.070753] PM: Adding info for No Bus:vcs2 [ 271.070782] PM: Adding info for No Bus:vcsa2 [ 271.073692] PM: Removing info for No Bus:vcs2 [ 271.073722] PM: Removing info for No Bus:vcsa2 [ 271.075900] PM: Adding info for No Bus:vcs3 [ 271.075925] PM: Adding info for No Bus:vcsa3 [ 271.078776] PM: Removing info for No Bus:vcs3 [ 271.078806] PM: Removing info for No Bus:vcsa3 [ 271.081021] PM: Adding info for No Bus:vcs4 [ 271.081047] PM: Adding info for No Bus:vcsa4 [ 271.083876] PM: Removing info for No Bus:vcs4 [ 271.083906] PM: Removing info for No Bus:vcsa4 [ 271.086079] PM: Adding info for No Bus:vcs5 [ 271.086106] PM: Adding info for No Bus:vcsa5 [ 271.088952] PM: Removing info for No Bus:vcs5 [ 271.088982] PM: Removing info for No Bus:vcsa5 [ 271.091177] PM: Adding info for No Bus:vcs6 [ 271.091203] PM: Adding info for No Bus:vcsa6 [ 271.094040] PM: Removing info for No Bus:vcs6 [ 271.094071] PM: Removing info for No Bus:vcsa6 [ 271.933264] PM: Adding info for No Bus:vcs4 [ 271.933293] PM: Adding info for No Bus:vcsa4 [ 271.936007] PM: Adding info for No Bus:vcs5 [ 271.936035] PM: Adding info for No Bus:vcsa5 [ 271.938730] PM: Adding info for No Bus:vcs2 [ 271.938755] PM: Adding info for No Bus:vcsa2 [ 271.941763] PM: Adding info for No Bus:vcs6 [ 271.941790] PM: Adding info for No Bus:vcsa6 [ 271.947014] PM: Adding info for No Bus:vcs3 [ 271.947043] PM: Adding info for No Bus:vcsa3 [ 274.971139] ata9: port is slow to respond, please be patient (Status 0x80) [ 279.047167] ata9: COMRESET failed (errno=-16) [ 279.047235] ata9: hard resetting port [ 284.964418] ata9: port is slow to respond, please be patient (Status 0x80) [ 289.040462] ata9: COMRESET failed (errno=-16) [ 289.040520] ata9: hard resetting port [ 294.957716] ata9: port is slow to respond, please be patient (Status 0x80) [ 324.050463] ata9: COMRESET failed (errno=-16) [ 324.050521] ata9: hard resetting port [ 329.050607] ata9: COMRESET failed (errno=-16) [ 329.050664] ata9: reset failed, giving up [ 329.050713] ata9: EH pending after completion, repeating EH (cnt=4) [ 329.050723] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 329.050787] ata9: hard resetting port [ 334.967859] ata9: port is slow to respond, please be patient (Status 0x80) [ 339.043900] ata9: COMRESET failed (errno=-16) [ 339.043958] ata9: hard resetting port [ 344.961153] ata9: port is slow to respond, please be patient (Status 0x80) [ 349.037196] ata9: COMRESET failed (errno=-16) [ 349.037253] ata9: hard resetting port [ 354.954448] ata9: port is slow to respond, please be patient (Status 0x80) [ 384.047197] ata9: COMRESET failed (errno=-16) [ 384.047255] ata9: hard resetting port [ 389.047339] ata9: COMRESET failed (errno=-16) [ 389.047395] ata9: reset failed, giving up [ 389.047444] ata9: EH pending after completion, repeating EH (cnt=3) [ 389.047454] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 389.047518] ata9: hard resetting port [ 394.964593] ata9: port is slow to respond, please be patient (Status 0x80) [ 399.040635] ata9: COMRESET failed (errno=-16) [ 399.040692] ata9: hard resetting port [ 404.957887] ata9: port is slow to respond, please be patient (Status 0x80) [ 409.033930] ata9: COMRESET failed (errno=-16) [ 409.033987] ata9: hard resetting port [ 414.951183] ata9: port is slow to respond, please be patient (Status 0x80) [ 444.043932] ata9: COMRESET failed (errno=-16) [ 444.043990] ata9: hard resetting port [ 449.044077] ata9: COMRESET failed (errno=-16) [ 449.044133] ata9: reset failed, giving up [ 449.044184] ata9: EH pending after completion, repeating EH (cnt=2) [ 449.044193] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 449.044259] ata9: hard resetting port [ 454.961331] ata9: port is slow to respond, please be patient (Status 0x80) [ 459.037372] ata9: COMRESET failed (errno=-16) [ 459.037429] ata9: hard resetting port [ 464.954625] ata9: port is slow to respond, please be patient (Status 0x80) [ 469.030666] ata9: COMRESET failed (errno=-16) [ 469.030723] ata9: hard resetting port [ 474.947919] ata9: port is slow to respond, please be patient (Status 0x80) [ 504.040666] ata9: COMRESET failed (errno=-16) [ 504.040723] ata9: hard resetting port [ 509.040809] ata9: COMRESET failed (errno=-16) [ 509.040865] ata9: reset failed, giving up [ 509.040915] ata9: EH pending after completion, repeating EH (cnt=1) [ 509.040924] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 509.040988] ata9: hard resetting port [ 514.958062] ata9: port is slow to respond, please be patient (Status 0x80) [ 519.034105] ata9: COMRESET failed (errno=-16) [ 519.034162] ata9: hard resetting port [ 524.951358] ata9: port is slow to respond, please be patient (Status 0x80) [ 529.027401] ata9: COMRESET failed (errno=-16) [ 529.027457] ata9: hard resetting port [ 534.944655] ata9: port is slow to respond, please be patient (Status 0x80) [ 564.037404] ata9: COMRESET failed (errno=-16) [ 564.037462] ata9: hard resetting port [ 569.037547] ata9: COMRESET failed (errno=-16) [ 569.037604] ata9: reset failed, giving up [ 569.037653] ata9: EH pending after 5 tries, giving up [ 569.037702] ata9: EH complete [ 569.038212] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 569.038329] ata9: hard resetting port [ 574.954800] ata9: port is slow to respond, please be patient (Status 0x80) [ 579.030842] ata9: COMRESET failed (errno=-16) [ 579.030900] ata9: hard resetting port [ 584.948094] ata9: port is slow to respond, please be patient (Status 0x80) [ 589.024136] ata9: COMRESET failed (errno=-16) [ 589.024193] ata9: hard resetting port [ 594.941388] ata9: port is slow to respond, please be patient (Status 0x80) [ 624.034134] ata9: COMRESET failed (errno=-16) [ 624.034157] ata9: hard resetting port [ 629.034278] ata9: COMRESET failed (errno=-16) [ 629.034301] ata9: reset failed, giving up [ 629.034318] ata9: EH pending after completion, repeating EH (cnt=4) [ 629.034327] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 629.034359] ata9: hard resetting port [ 634.951532] ata9: port is slow to respond, please be patient (Status 0x80) [ 639.027574] ata9: COMRESET failed (errno=-16) [ 639.027597] ata9: hard resetting port [ 644.944826] ata9: port is slow to respond, please be patient (Status 0x80) [ 649.020869] ata9: COMRESET failed (errno=-16) [ 649.020892] ata9: hard resetting port [ 654.938122] ata9: port is slow to respond, please be patient (Status 0x80) [ 684.030871] ata9: COMRESET failed (errno=-16) [ 684.030895] ata9: hard resetting port [ 689.031013] ata9: COMRESET failed (errno=-16) [ 689.031035] ata9: reset failed, giving up [ 689.031054] ata9: EH pending after completion, repeating EH (cnt=3) [ 689.031063] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 689.031096] ata9: hard resetting port [ 694.948265] ata9: port is slow to respond, please be patient (Status 0x80) [ 699.024308] ata9: COMRESET failed (errno=-16) [ 699.024331] ata9: hard resetting port [ 704.941562] ata9: port is slow to respond, please be patient (Status 0x80) [ 709.017605] ata9: COMRESET failed (errno=-16) [ 709.017629] ata9: hard resetting port [ 714.934857] ata9: port is slow to respond, please be patient (Status 0x80) [ 744.027604] ata9: COMRESET failed (errno=-16) [ 744.027661] ata9: hard resetting port [ 749.027748] ata9: COMRESET failed (errno=-16) [ 749.027804] ata9: reset failed, giving up [ 749.027853] ata9: EH pending after completion, repeating EH (cnt=2) [ 749.027863] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 749.027927] ata9: hard resetting port [ 754.945001] ata9: port is slow to respond, please be patient (Status 0x80) [ 759.021043] ata9: COMRESET failed (errno=-16) [ 759.021100] ata9: hard resetting port [ 764.938296] ata9: port is slow to respond, please be patient (Status 0x80) [ 769.014339] ata9: COMRESET failed (errno=-16) [ 769.014396] ata9: hard resetting port [ 774.931593] ata9: port is slow to respond, please be patient (Status 0x80) [ 804.024341] ata9: COMRESET failed (errno=-16) [ 804.025512] ata9: hard resetting port [ 809.025483] ata9: COMRESET failed (errno=-16) [ 809.025540] ata9: reset failed, giving up [ 809.025589] ata9: EH pending after completion, repeating EH (cnt=1) [ 809.025599] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 809.025663] ata9: hard resetting port [ 814.942735] ata9: port is slow to respond, please be patient (Status 0x80) [ 819.018777] ata9: COMRESET failed (errno=-16) [ 819.018834] ata9: hard resetting port [ 824.936031] ata9: port is slow to respond, please be patient (Status 0x80) [ 829.012073] ata9: COMRESET failed (errno=-16) [ 829.012130] ata9: hard resetting port [ 834.929326] ata9: port is slow to respond, please be patient (Status 0x80) [ 864.022076] ata9: COMRESET failed (errno=-16) [ 864.022134] ata9: hard resetting port [ 869.022221] ata9: COMRESET failed (errno=-16) [ 869.022277] ata9: reset failed, giving up [ 869.022326] ata9: EH pending after 5 tries, giving up [ 869.022375] ata9: EH complete [ 869.022882] ata9: exception Emask 0x10 SAct 0x0 SErr 0x39d0000 action 0x2 frozen [ 869.022999] ata9: hard resetting port [ 874.939473] ata9: port is slow to respond, please be patient (Status 0x80) [ 879.015515] ata9: COMRESET failed (errno=-16) [ 879.015572] ata9: hard resetting port [ 884.932768] ata9: port is slow to respond, please be patient (Status 0x80) [ 889.008810] ata9: COMRESET failed (errno=-16) [ 889.008867] ata9: hard resetting port [ 894.926055] ata9: port is slow to respond, please be patient (Status 0x80)