Re: Sata Sil3512 bug?; Promise SATA300 TX4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

Tejun Heo wrote:
> 
> Does the attached patch help?
> 

It does somehow force 1.5GB/s mode, and it does change the pattern of
'configured for UDMAxxx' messages that come along with errors, and it
causes the following error:

ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4
ata3: hotplug_status 0x10
ata3: soft resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/133
ata3: EH complete

for both drives on TX4 on startup, but read errors are still there.

dmesgs at http://lxnt.info/linux/libata-dev/patch0/

READY
[]


-- 

./lxnt
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux