Re: [PATCH] ahci: enable GHC.AE bit before set GHC.HR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Alan Cox wrote:
On Wed, 26 Sep 2007 00:03:19 -0400
Jeff Garzik <jeff@xxxxxxxxxx> wrote:

Peer Chen wrote:
According to the description of section 5.2.2.1 and 10.1.2 of AHCI specification rev1_1/rev1_2, GHC.HR shall only be set to ¡®1¡¯
by software when GHC.AE is set to ¡®1¡¯.

Signed-off-by: Peer Chen <peerchen@xxxxxxxxx>
---
--- linux-2.6.23-rc7/drivers/ata/ahci.c.orig	2007-09-20 11:01:55.000000000 -0400
+++ linux-2.6.23-rc7/drivers/ata/ahci.c	2007-09-20 11:07:31.000000000 -0400
@@ -834,6 +834,10 @@ static int ahci_reset_controller(struct void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	u32 tmp;
+ /* turn on AHCI mode before controller reset*/
+        writel(HOST_AHCI_EN, mmio + HOST_CTL);
+        (void) readl(mmio + HOST_CTL);  /* flush */
applied the attached patch, inspired by yours.


NAK - mmio is an iomap so writel and readl are the wrong things to use

The patch is consistent with the rest of the driver.

You are welcome to submit a patch to convert ahci to using ioremap.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux