Alexander Sabourenkov schrieb: > Hardware: Athlon64, Asus A8V, Promise SATA300 TX4, 2xSeagate 7200.10 > 320G, jumper-limited to SATA150. > Kernel : 2.6.22.9 amd64 > > Problem: > Heavy load causes errors and triggers oops. Have you checked your memory already (memtest86)? We have several applications with Promise controllers on strange hardware and we never had integrity problems with i.e. not so standard SATA connections over custom vaccum-tight connectors. > Problems were blamed: > - SATA300 being too 'hot' (jumpered the drives) Is this a common known problem with your harddrives or controller? (ask google) Otherwise, it sounds like a problem with broken hardware. > - cables (work perfectly on onboard controller) > - interrupt sharing (found the only slot which does not share > interrupt line) > - cooling (3 fans installed, smartctl-reported temperature at max load > dropped to 35C) Try to heat up your memory a little (your wife's hair blower). If it fails more often, your memory is most likely broken. > - weak PSU (installed 600W FSP) > - kernel bugs (upgraded to 2.6.22.9) > > All those measures significantly dropped error rate (from about 20 to > 2-4 per mirror rebuild) but did not eliminate the problem. Again... sounds like bad memory to me. Juat my $0.05. Regards, Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
