Re: Strange arbitrary port resets on ICH9R with Seagate drives

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 01 Oct 2007 01:30:59 +0100, Jonathan Bell <doggs.lay.eggs@xxxxxxxxxxxxxx> wrote:

Hello

I've just purchased a brand spanking new G33/ICH9R based system for use as a home fileserver with 4x ST3750840AS Seagate SATA drives as the main grunt drives.

The problem is that all of the seagate drives keep resetting, as this dmesg excerpt shows:

Oops. Hardware problem. Insufficient power applied to the hotswap caddy resulted in the drives bugging out when all 4 were accessed, hence cat/dd on an individual drive caused no problems.

Now running these drives quite successfully in raid-5 with NCQ and 3.0Gbps links.

Regards
Jonathan
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux