[regression] 2.6.23 sata_mv EH updates broke my 7042 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I just pulled out my Marvell 7042 SATA controller here to give it a spin
and noticed that it no longer worked (i.e. init segvs when loading from
it), etc. 2.6.22 is fine.

Bisecting (just the file drivers/ata/sata_mv.c) resulted in
bdd4dddee325a7dce3e84cf48201a06aa8508aa4 popping out as the culprit
(file version 4537deb5e90b717a725b3d74b58b4bb1d28443d0 is fine).

Just for sanity checking: Has anyone else used 7042/6042 with the current
mainline driver?

Hardware config in my case:
Highpoint 2310 controller
PPC (big endian)
WD Raptor disk

Works fine with the other controller I've been using (SIL24), and works
fine if I revert the driver.

It also works fine if I disable the IOMMU. This would point towards
either a stale dma mapping, or a missing setup of one.

Not being much at home in the SATA drivers I could keep digging but I
figured I'd bring it up first in case it rings a bell for someone.


-Olof
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux