On Thu, 2007-11-01 at 10:04 +0000, Alan Cox wrote:
> > + max_devices = ata_link_max_devices(&ap->link);
> > +
> > + for (i = 0; i < max_devices; ++i) {
> > + struct ata_device *dev = &ap->link.device[i];
>
> Better to use:
ok.
> ata_link_for_each_dev(dev, &ap->link) {
>
> > +
> > + if (dev->acpi_handle)
> > + acpi_bus_set_power(dev->acpi_handle,
> > + state.event == PM_EVENT_ON ?
> > + ACPI_STATE_D0: ACPI_STATE_D3);
> > + }
>
> Also should you not check ata_dev_enabled(dev) ?
Not sure, this is just to call a BIOS routine, but a check should be
safer. Thanks!
ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx
methods. As recently most PATA drivers use libata, this patch adds _PSx
method support in libata. ACPI spec doesn't mention if SATA requires the
same _PSx method.
Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
Acked-by: Len Brown <len.brown@xxxxxxxxx>
---
drivers/ata/libata-acpi.c | 29 +++++++++++++++++++++++++++++
drivers/ata/libata-eh.c | 3 +++
drivers/ata/libata.h | 2 ++
3 files changed, 34 insertions(+)
Index: linux/drivers/ata/libata-acpi.c
===================================================================
--- linux.orig/drivers/ata/libata-acpi.c 2007-11-01 10:54:25.000000000 +0800
+++ linux/drivers/ata/libata-acpi.c 2007-11-02 09:14:12.000000000 +0800
@@ -652,6 +652,35 @@ void ata_acpi_on_resume(struct ata_port
}
/**
+ * ata_acpi_set_state - set the port power state
+ * @ap: target ATA port
+ * @state: state, on/off
+ *
+ * This function executes the _PS0/_PS3 ACPI method to set the power state.
+ * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
+ */
+void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
+{
+ struct ata_device *dev;
+
+ if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
+ return;
+
+ /* channel first and then drives for power on and verse versa for power off */
+ if (state.event == PM_EVENT_ON)
+ acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
+
+ ata_link_for_each_dev(dev, &ap->link) {
+ if (dev->acpi_handle && ata_dev_enabled(dev))
+ acpi_bus_set_power(dev->acpi_handle,
+ state.event == PM_EVENT_ON ?
+ ACPI_STATE_D0: ACPI_STATE_D3);
+ }
+ if (state.event != PM_EVENT_ON)
+ acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
+}
+
+/**
* ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
* @dev: target ATA device
*
Index: linux/drivers/ata/libata-eh.c
===================================================================
--- linux.orig/drivers/ata/libata-eh.c 2007-11-01 10:54:25.000000000 +0800
+++ linux/drivers/ata/libata-eh.c 2007-11-02 09:01:41.000000000 +0800
@@ -2796,6 +2796,7 @@ static void ata_eh_handle_port_suspend(s
if (ap->ops->port_suspend)
rc = ap->ops->port_suspend(ap, ap->pm_mesg);
+ ata_acpi_set_state(ap, PMSG_SUSPEND);
out:
/* report result */
spin_lock_irqsave(ap->lock, flags);
@@ -2841,6 +2842,8 @@ static void ata_eh_handle_port_resume(st
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
+ ata_acpi_set_state(ap, PMSG_ON);
+
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
Index: linux/drivers/ata/libata.h
===================================================================
--- linux.orig/drivers/ata/libata.h 2007-11-01 10:54:25.000000000 +0800
+++ linux/drivers/ata/libata.h 2007-11-02 09:01:41.000000000 +0800
@@ -111,12 +111,14 @@ extern void ata_acpi_associate(struct at
extern int ata_acpi_on_suspend(struct ata_port *ap);
extern void ata_acpi_on_resume(struct ata_port *ap);
extern int ata_acpi_on_devcfg(struct ata_device *adev);
+extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
#else
static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
static inline void ata_acpi_associate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
static inline void ata_acpi_on_resume(struct ata_port *ap) { }
static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
+static inline void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) { }
#endif
/* libata-scsi.c */
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
