linux@xxxxxxxxxxx wrote: > I just got a fourth panic. Fortunately, no file system corruption > this time. It was an exact clone of the second one, down to the register > contents, except for the process name, so I haven't bothered transcribing > it separately. Also, I wasn't messing with the drives when it happened; > I was asleep in bed and found the panic greeting me on the morning. > > I apologize for the truncated logs, but I couldn't scroll back and had > to photograph the console screen to get what's here. > > i686 uniprocessor, 440BX motherboard, 1 GB ECC memory (you can see from > the kernel addresses that I'm using a 2.75/1.25 G memory split), has been > in production with excellent stability for a long time. Occasional disk > glitches handled by RAID; almost everything except for some scratch > space is mirrored. > > Monolithic kernel.org 2.6.18 + linuxpps patches. I had something similar to this happen to me, however, I was unable to use the system at all once this happened. I'm using a Supermicro X5DA8 motherboard (2x 2.6ghz xeon, 1gb mem, 3 dual scsi controllers). IDE is a module and as soon as hotplug loads the module for the IDE controller, it hangs. My boot disk is on the internal scsi ch0 controller. The only IDE device is a single cdrom (all other drives are scsi or use a hardware ide-to-scsi converter). The IDE controller is an Intel ICH4 controller (Intel E7505 chipset) If anyone is interested, I will post my 2.6.18 config. -- Lab tests show that use of micro$oft causes cancer in lab animals Got Gas??? - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
