-----Original Message----- From: Benjamin Herrenschmidt [mailto:benh@xxxxxxxxxxxxxxxxxxx] Sent: Monday, October 23, 2006 6:56 PM To: Danny Sung Cc: Jeff Garzik; linux-ide@xxxxxxxxxxxxxxx Subject: Re: SATA driver issues? Interestingly, I didn't get any drive resets last night. Maybe one of those flags (pci=noacpi idebus=66) fixed the problem. I'll try removing the idebus line since Alan Cox said I shouldn't need it. > The HT1000 is using a frodo SATA cell ? (me doesn't know for sure :) > What is the lspci output ? 00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge 00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge 00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller 00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge 00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01) 00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01) 00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01) 00:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 00:06.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3) 00:07.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3) 00:08.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) 00:09.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) 00:0a.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) 00:0b.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2) 01:0e.0 IDE interface: Broadcom BCM5785 (HT1000) SATA Native SATA Mode 01:0e.1 IDE interface: Broadcom BCM5785 (HT1000) SATA Native SATA Mode 04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) 04:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) (verbose at bottom) >BTW. Please remove that completely bogus disclaimer at the end of your emails, >especially when posting to a public list. It's a total nonsense and may cause >quite a few people to decide to ignore your message completely. I know, it's horribly embarrassing. I wish I could do something about it, but it's from my company's outgoing mail server. I'll see what I can get out of my IT people, but I doubt there's much I can do. Many sincere appologies. Can I legally put a disclaimer that nullifies the disclaimer? ;-) Here's the lspci -v output: 00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 64 Bus: primary=00, secondary=01, subordinate=02, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: e8100000-e81fffff Prefetchable memory behind bridge: 0000000088000000-0000000088000000 Capabilities: [90] PCI-X bridge device Capabilities: [a0] HyperTransport: MSI Mapping Capabilities: [b0] HyperTransport: Slave or Primary Interface 00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge Subsystem: Broadcom Unknown device 0201 Flags: bus master, medium devsel, latency 64 00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller (prog-if 8a [Master SecP PriP]) Subsystem: Broadcom HT1000 Legacy IDE controller Flags: bus master, medium devsel, latency 64 I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at 2000 [size=16] Capabilities: [b0] Power Management version 2 00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge Subsystem: Broadcom Unknown device 0230 Flags: bus master, medium devsel, latency 0 00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Broadcom HT1000 USB Controller Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 Memory at e8011000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1000 [size=256] Capabilities: [dc] Power Management version 2 00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Broadcom HT1000 USB Controller Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 Memory at e8012000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1400 [size=256] Capabilities: [dc] Power Management version 2 00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Broadcom HT1000 USB Controller Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 Memory at e8013000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1800 [size=256] Capabilities: [dc] Power Management version 2 00:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA]) Subsystem: IBM Unknown device 0325 Flags: stepping, medium devsel, IRQ 169 Memory at f0000000 (32-bit, prefetchable) [size=128M] I/O ports at 1c00 [size=256] Memory at e8000000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at 88100000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 00:06.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 Capabilities: [90] PCI-X bridge device Capabilities: [a0] HyperTransport: MSI Mapping Capabilities: [b0] HyperTransport: Slave or Primary Interface 00:07.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 Memory behind bridge: e8200000-e82fffff Capabilities: [90] PCI-X bridge device Capabilities: [a0] HyperTransport: MSI Mapping 00:08.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 Capabilities: [a0] HyperTransport: MSI Mapping Capabilities: [b0] Express Root Port (Slot-) IRQ 0 00:09.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=64 Capabilities: [a0] HyperTransport: MSI Mapping Capabilities: [b0] Express Root Port (Slot-) IRQ 0 00:0a.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64 Capabilities: [a0] HyperTransport: MSI Mapping Capabilities: [b0] Express Root Port (Slot-) IRQ 0 00:0b.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=64 Capabilities: [a0] HyperTransport: MSI Mapping Capabilities: [b0] Express Root Port (Slot-) IRQ 0 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuratio n Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface Capabilities: [a0] HyperTransport: Host or Secondary Interface Capabilities: [c0] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuratio n Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface Capabilities: [a0] HyperTransport: Host or Secondary Interface Capabilities: [c0] HyperTransport: Host or Secondary Interface 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel 01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=01, secondary=02, subordinate=02, sec-latency=64 Capabilities: [90] PCI-X bridge device 01:0e.0 IDE interface: Broadcom BCM5785 (HT1000) SATA Native SATA Mode (prog-if 8f [Master SecP SecO PriP PriO ]) Subsystem: Broadcom BCM5785 (HT1000) SATA Native SATA Mode Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 3040 [size=8] I/O ports at 3034 [size=4] I/O ports at 3038 [size=8] I/O ports at 3030 [size=4] I/O ports at 3000 [size=16] Memory at e8100000 (32-bit, non-prefetchable) [size=8K] [virtual] Expansion ROM at 88000000 [disabled] [size=128K] Capabilities: [60] PCI-X non-bridge device Capabilities: [90] Power Management version 2 Capabilities: [a0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- 01:0e.1 IDE interface: Broadcom BCM5785 (HT1000) SATA Native SATA Mode (prog-if 8f [Master SecP SecO PriP PriO ]) Subsystem: Broadcom BCM5785 (HT1000) SATA Native SATA Mode Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 I/O ports at 3058 [size=8] I/O ports at 304c [size=4] I/O ports at 3050 [size=8] I/O ports at 3048 [size=4] I/O ports at 3020 [size=16] Capabilities: [60] PCI-X non-bridge device Capabilities: [90] Power Management version 2 Capabilities: [a0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- 04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) Subsystem: IBM Unknown device 0329 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 201 Memory at e8210000 (64-bit, non-prefetchable) [size=64K] Memory at e8200000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable+ 04:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) Subsystem: IBM Unknown device 0329 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185 Memory at e8230000 (64-bit, non-prefetchable) [size=64K] Memory at e8220000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- ********************************************************************** This e-mail is the property of Lantronix. It is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential, or otherwise protected from disclosure. Distribution or copying of this e-mail, or the information contained herein, to anyone other than the intended recipient is prohibited. - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
