Re: M-Systems SATA FFD fails IDENTIFY cmd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin Hicks wrote:
Hi,

I've got a few M-Systems SATA FFD 2.5" solid state disks that behave
strangely with some drivers.

When probing the disks on an Asus P5P800-MX motherboard's onboard SATA
and with an embedded PPC440gx machine with an on-board Intel 31244
(sata_vsc) SATA controller I get the following:

mort@seaking:~$ sudo modprobe ata_piix
Oct 24 12:54:15 localhost kernel: ata_piix 0000:00:1f.2: version 2.00ac6
Oct 24 12:54:15 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Oct 24 12:54:15 localhost kernel: PCI: Enabling device 0000:00:1f.2 (0000 -> 0001)
Oct 24 12:54:15 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
Oct 24 12:54:15 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Oct 24 12:54:15 localhost kernel: ata11: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 16
Oct 24 12:54:15 localhost kernel: ata12: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 16
Oct 24 12:54:15 localhost kernel: scsi10 : ata_piix
Oct 24 12:54:45 localhost kernel: ata11.00: qc timeout (cmd 0xec)
Oct 24 12:54:45 localhost kernel: ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Oct 24 12:54:46 localhost kernel: ata11.00: ATA-6, max UDMA/100, 16074752 sectors: LBA Oct 24 12:54:46 localhost kernel: ata11.00: ata11: dev 0 multi count 2
Oct 24 12:54:46 localhost kernel: ata11.00: applying bridge limits
Oct 24 12:54:46 localhost kernel: ata11.00: configured for UDMA/100
Oct 24 12:54:46 localhost kernel: scsi11 : ata_piix
Oct 24 12:54:46 localhost kernel: ATA: abnormal status 0x7F on port 0xA807
Oct 24 12:54:46 localhost kernel: scsi 10:0:0:0: Direct-Access     ATA      M-Systems FFD Se 1.03 PQ: 0 ANSI: 5
Oct 24 12:54:46 localhost kernel: SCSI device sda: 16074752 512-byte hdwr sectors (8230 MB)
Oct 24 12:54:46 localhost kernel: sda: Write Protect is off
Oct 24 12:54:46 localhost kernel: sda: Mode Sense: 00 3a 00 00
Oct 24 12:54:46 localhost kernel: SCSI device sda: drive cache: write back
Oct 24 12:54:46 localhost kernel: SCSI device sda: 16074752 512-byte hdwr sectors (8230 MB)
Oct 24 12:54:46 localhost kernel: sda: Write Protect is off
Oct 24 12:54:46 localhost kernel: sda: Mode Sense: 00 3a 00 00
Oct 24 12:54:46 localhost kernel: SCSI device sda: drive cache: write back
Oct 24 12:54:46 localhost kernel:  sda: unknown partition table
Oct 24 12:54:46 localhost kernel: sd 10:0:0:0: Attached scsi disk sda


As you can see the INQUIRY command fails after 30 seconds. The x86/ata_piix
machine is running 2.6.19-rc3.  The PPC/sata_vsc machine is running
2.6.18.

Can you try 2.6.19-rc3-mm1 and report the result?  Thanks.

--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux