Oct 14 08:48:18 server 0: 0000000000100000 - 000000001f7b0000 (usable) Oct 14 08:48:18 server BIOS-e820: 000000001f7b0000 - 000000001f7be000 (ACPI data) Oct 14 08:48:18 server BIOS-e820: 000000001f7be000 - 000000001f7e0000 (ACPI NVS) Oct 14 08:48:18 server BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved) Oct 14 08:48:18 server BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Oct 14 08:48:18 server BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Oct 14 08:48:18 server BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) Oct 14 08:48:18 server 503MB LOWMEM available. Oct 14 08:48:18 server Entering add_active_range(0, 0, 128944) 0 entries of 256 used Oct 14 08:48:18 server Zone PFN ranges: Oct 14 08:48:18 server DMA 0 -> 4096 Oct 14 08:48:18 server Normal 4096 -> 128944 Oct 14 08:48:18 server early_node_map[1] active PFN ranges Oct 14 08:48:18 server 0: 0 -> 128944 Oct 14 08:48:18 server On node 0 totalpages: 128944 Oct 14 08:48:18 server DMA zone: 32 pages used for memmap Oct 14 08:48:18 server DMA zone: 0 pages reserved Oct 14 08:48:18 server DMA zone: 4064 pages, LIFO batch:0 Oct 14 08:48:18 server Normal zone: 975 pages used for memmap Oct 14 08:48:18 server Normal zone: 123873 pages, LIFO batch:31 Oct 14 08:48:18 server DMI 2.3 present. Oct 14 08:48:18 server ACPI: RSDP (v002 ACPIAM ) @ 0x000fac60 Oct 14 08:48:18 server ACPI: XSDT (v001 A M I OEMXSDT 0x09000505 MSFT 0x00000097) @ 0x1f7b0100 Oct 14 08:48:18 server ACPI: FADT (v003 A M I OEMFACP 0x09000505 MSFT 0x00000097) @ 0x1f7b0290 Oct 14 08:48:18 server ACPI: MADT (v001 A M I OEMAPIC 0x09000505 MSFT 0x00000097) @ 0x1f7b0390 Oct 14 08:48:18 server ACPI: OEMB (v001 A M I AMI_OEM 0x09000505 MSFT 0x00000097) @ 0x1f7be040 Oct 14 08:48:18 server ACPI: DSDT (v001 A0347 A0347001 0x00000001 INTL 0x02002026) @ 0x00000000 Oct 14 08:48:18 server ACPI: PM-Timer IO Port: 0x808 Oct 14 08:48:18 server Allocating PCI resources starting at 20000000 (gap: 1f800000:c0800000) Oct 14 08:48:18 server Detected 1800.130 MHz processor. Oct 14 08:48:18 server Built 1 zonelists. Total pages: 127937 Oct 14 08:48:18 server Kernel command line: root=/dev/sda3 Oct 14 08:48:18 server Enabling fast FPU save and restore... done. Oct 14 08:48:18 server Enabling unmasked SIMD FPU exception support... done. Oct 14 08:48:18 server Initializing CPU#0 Oct 14 08:48:18 server PID hash table entries: 2048 (order: 11, 8192 bytes) Oct 14 08:48:18 server Console: colour VGA+ 80x25 Oct 14 08:48:18 server Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 14 08:48:18 server Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Oct 14 08:48:18 server Memory: 507932k/515776k available (1895k kernel code, 7356k reserved, 712k data, 136k init, 0k highmem) Oct 14 08:48:18 server virtual kernel memory layout: Oct 14 08:48:18 server fixmap : 0xffff8000 - 0xfffff000 ( 28 kB) Oct 14 08:48:18 server vmalloc : 0xe0000000 - 0xffff6000 ( 511 MB) Oct 14 08:48:18 server lowmem : 0xc0000000 - 0xdf7b0000 ( 503 MB) Oct 14 08:48:18 server .init : 0xc038e000 - 0xc03b0000 ( 136 kB) Oct 14 08:48:18 server .data : 0xc02d9d36 - 0xc038beec ( 712 kB) Oct 14 08:48:18 server .text : 0xc0100000 - 0xc02d9d36 (1895 kB) Oct 14 08:48:18 server Checking if this processor honours the WP bit even in supervisor mode... Ok. Oct 14 08:48:18 server Calibrating delay using timer specific routine.. 3602.34 BogoMIPS (lpj=7204688) Oct 14 08:48:18 server Mount-cache hash table entries: 512 Oct 14 08:48:18 server CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 Oct 14 08:48:18 server CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Oct 14 08:48:18 server CPU: L2 Cache: 1024K (64 bytes/line) Oct 14 08:48:18 server CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 Oct 14 08:48:18 server Intel machine check architecture supported. Oct 14 08:48:18 server Intel machine check reporting enabled on CPU#0. Oct 14 08:48:18 server Compat vDSO mapped to ffffe000. Oct 14 08:48:18 server CPU: AMD Opteron(tm) Processor 144 stepping 01 Oct 14 08:48:18 server Checking 'hlt' instruction... OK. Oct 14 08:48:18 server ACPI: Core revision 20060707 Oct 14 08:48:18 server ACPI: setting ELCR to 0200 (from 0c28) Oct 14 08:48:18 server NET: Registered protocol family 16 Oct 14 08:48:18 server ACPI: bus type pci registered Oct 14 08:48:18 server PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 Oct 14 08:48:18 server PCI: Using configuration type 1 Oct 14 08:48:18 server Setting up standard PCI resources Oct 14 08:48:18 server ACPI: Interpreter enabled Oct 14 08:48:18 server ACPI: Using PIC for interrupt routing Oct 14 08:48:18 server ACPI: PCI Root Bridge [PCI0] (0000:00) Oct 14 08:48:18 server PCI: Probing PCI hardware (bus 00) Oct 14 08:48:18 server Boot video device is 0000:01:00.0 Oct 14 08:48:18 server ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 14 08:48:18 server ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Oct 14 08:48:18 server ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] Oct 14 08:48:18 server ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT] Oct 14 08:48:18 server ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT] Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 14 08:48:18 server Linux Plug and Play Support v0.97 (c) Adam Belay Oct 14 08:48:18 server pnp: PnP ACPI init Oct 14 08:48:18 server pnp: PnP ACPI: found 13 devices Oct 14 08:48:18 server SCSI subsystem initialized Oct 14 08:48:18 server usbcore: registered new interface driver usbfs Oct 14 08:48:18 server usbcore: registered new interface driver hub Oct 14 08:48:18 server usbcore: registered new device driver usb Oct 14 08:48:18 server PCI: Using ACPI for IRQ routing Oct 14 08:48:18 server PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Oct 14 08:48:18 server pnp: 00:07: ioport range 0x290-0x297 has been reserved Oct 14 08:48:18 server PCI: Bridge: 0000:00:01.0 Oct 14 08:48:18 server IO window: disabled. Oct 14 08:48:18 server MEM window: fca00000-feafffff Oct 14 08:48:18 server PREFETCH window: cff00000-d7efffff Oct 14 08:48:18 server PCI: Bridge: 0000:02:00.0 Oct 14 08:48:18 server IO window: disabled. Oct 14 08:48:18 server MEM window: disabled. Oct 14 08:48:18 server PREFETCH window: disabled. Oct 14 08:48:18 server PCI: Bridge: 0000:02:00.1 Oct 14 08:48:18 server IO window: disabled. Oct 14 08:48:18 server MEM window: disabled. Oct 14 08:48:18 server PREFETCH window: disabled. Oct 14 08:48:18 server PCI: Bridge: 0000:00:13.0 Oct 14 08:48:18 server IO window: disabled. Oct 14 08:48:18 server MEM window: disabled. Oct 14 08:48:18 server PREFETCH window: disabled. Oct 14 08:48:18 server PCI: Setting latency timer of device 0000:00:01.0 to 64 Oct 14 08:48:18 server PCI: Setting latency timer of device 0000:00:13.0 to 64 Oct 14 08:48:18 server PCI: Setting latency timer of device 0000:02:00.0 to 64 Oct 14 08:48:18 server PCI: Setting latency timer of device 0000:02:00.1 to 64 Oct 14 08:48:18 server NET: Registered protocol family 2 Oct 14 08:48:18 server IP route cache hash table entries: 4096 (order: 2, 16384 bytes) Oct 14 08:48:18 server TCP established hash table entries: 16384 (order: 4, 65536 bytes) Oct 14 08:48:18 server TCP bind hash table entries: 8192 (order: 3, 32768 bytes) Oct 14 08:48:18 server TCP: Hash tables configured (established 16384 bind 8192) Oct 14 08:48:18 server TCP reno registered Oct 14 08:48:18 server Machine check exception polling timer started. Oct 14 08:48:18 server audit: initializing netlink socket (disabled) Oct 14 08:48:18 server audit(1160815666.396:1): initialized Oct 14 08:48:18 server Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). Oct 14 08:48:18 server io scheduler noop registered Oct 14 08:48:18 server io scheduler anticipatory registered (default) Oct 14 08:48:18 server io scheduler deadline registered Oct 14 08:48:18 server io scheduler cfq registered Oct 14 08:48:18 server ACPI: Power Button (FF) [PWRF] Oct 14 08:48:18 server ACPI: Sleep Button (CM) [SLPB] Oct 14 08:48:18 server ACPI: Power Button (CM) [PWRB] Oct 14 08:48:18 server ACPI: Processor [CPU1] (supports 16 throttling states) Oct 14 08:48:18 server ACPI: Getting cpuindex for acpiid 0x2 Oct 14 08:48:18 server Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Oct 14 08:48:18 server serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Oct 14 08:48:18 server 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Oct 14 08:48:18 server Floppy drive(s): fd0 is 1.44M Oct 14 08:48:18 server FDC 0 is a post-1991 82077 Oct 14 08:48:18 server via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 Oct 14 08:48:18 server PCI: setting IRQ 11 as level-triggered Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Oct 14 08:48:18 server eth0: VIA Rhine II at 0xfebff000, 00:13:d4:a7:82:e5, IRQ 11. Oct 14 08:48:18 server eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1. Oct 14 08:48:18 server Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Oct 14 08:48:18 server ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Oct 14 08:48:18 server VP_IDE: IDE controller at PCI slot 0000:00:0f.1 Oct 14 08:48:18 server PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0 Oct 14 08:48:18 server VP_IDE: chipset revision 7 Oct 14 08:48:18 server VP_IDE: not 100% native mode: will probe irqs later Oct 14 08:48:18 server VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 Oct 14 08:48:18 server ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA Oct 14 08:48:18 server ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Oct 14 08:48:18 server Probing IDE interface ide0... Oct 14 08:48:18 server hdb: Pioneer DVD-ROM ATAPIModel DVD-104S 012, ATAPI CD/DVD-ROM drive Oct 14 08:48:18 server ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Oct 14 08:48:18 server Probing IDE interface ide1... Oct 14 08:48:18 server hdc: ST3160021A, ATA DISK drive Oct 14 08:48:18 server ide1 at 0x170-0x177,0x376 on irq 15 Oct 14 08:48:18 server hdc: max request size: 512KiB Oct 14 08:48:18 server hdc: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100) Oct 14 08:48:18 server hdc: cache flushes supported Oct 14 08:48:18 server hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 > Oct 14 08:48:18 server hdb: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Oct 14 08:48:18 server Uniform CD-ROM driver Revision: 3.20 Oct 14 08:48:18 server libata version 2.00 loaded. Oct 14 08:48:18 server ahci 0000:00:0f.0: version 2.0 Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 Oct 14 08:48:18 server PCI: setting IRQ 10 as level-triggered Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Oct 14 08:48:18 server ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode Oct 14 08:48:18 server ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part Oct 14 08:48:18 server ata1: SATA max UDMA/133 cmd 0xE0006D00 ctl 0x0 bmdma 0x0 irq 10 Oct 14 08:48:18 server ata2: SATA max UDMA/133 cmd 0xE0006D80 ctl 0x0 bmdma 0x0 irq 10 Oct 14 08:48:18 server ata3: SATA max UDMA/133 cmd 0xE0006E00 ctl 0x0 bmdma 0x0 irq 10 Oct 14 08:48:18 server ata4: SATA max UDMA/133 cmd 0xE0006E80 ctl 0x0 bmdma 0x0 irq 10 Oct 14 08:48:18 server scsi0 : ahci Oct 14 08:48:18 server ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 14 08:48:18 server ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32) Oct 14 08:48:18 server ata1.00: ata1: dev 0 multi count 16 Oct 14 08:48:18 server ata1.00: configured for UDMA/133 Oct 14 08:48:18 server scsi1 : ahci Oct 14 08:48:18 server ata2: SATA link down (SStatus 0 SControl 300) Oct 14 08:48:18 server scsi2 : ahci Oct 14 08:48:18 server ata3: SATA link down (SStatus 0 SControl 300) Oct 14 08:48:18 server scsi3 : ahci Oct 14 08:48:18 server ata4: SATA link down (SStatus 0 SControl 300) Oct 14 08:48:18 server scsi 0:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0 ANSI: 5 Oct 14 08:48:18 server SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Oct 14 08:48:18 server sda: Write Protect is off Oct 14 08:48:18 server sda: Mode Sense: 00 3a 00 00 Oct 14 08:48:18 server SCSI device sda: drive cache: write back Oct 14 08:48:18 server SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Oct 14 08:48:18 server sda: Write Protect is off Oct 14 08:48:18 server sda: Mode Sense: 00 3a 00 00 Oct 14 08:48:18 server SCSI device sda: drive cache: write back Oct 14 08:48:18 server sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > Oct 14 08:48:18 server sd 0:0:0:0: Attached scsi disk sda Oct 14 08:48:18 server sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 Oct 14 08:48:18 server PCI: setting IRQ 5 as level-triggered Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 Oct 14 08:48:18 server ehci_hcd 0000:00:10.4: EHCI Host Controller Oct 14 08:48:18 server ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 Oct 14 08:48:18 server ehci_hcd 0000:00:10.4: debug port 1 Oct 14 08:48:18 server ehci_hcd 0000:00:10.4: irq 5, io mem 0xfebff400 Oct 14 08:48:18 server ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Oct 14 08:48:18 server usb usb1: configuration #1 chosen from 1 choice Oct 14 08:48:18 server hub 1-0:1.0: USB hub found Oct 14 08:48:18 server hub 1-0:1.0: 8 ports detected Oct 14 08:48:18 server USB Universal Host Controller Interface driver v3.0 Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Oct 14 08:48:18 server uhci_hcd 0000:00:10.0: UHCI Host Controller Oct 14 08:48:18 server uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 Oct 14 08:48:18 server uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e000 Oct 14 08:48:18 server usb usb2: configuration #1 chosen from 1 choice Oct 14 08:48:18 server hub 2-0:1.0: USB hub found Oct 14 08:48:18 server hub 2-0:1.0: 2 ports detected Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:10.1[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 Oct 14 08:48:18 server uhci_hcd 0000:00:10.1: UHCI Host Controller Oct 14 08:48:18 server uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 Oct 14 08:48:18 server uhci_hcd 0000:00:10.1: irq 5, io base 0x0000dc00 Oct 14 08:48:18 server usb usb3: configuration #1 chosen from 1 choice Oct 14 08:48:18 server hub 3-0:1.0: USB hub found Oct 14 08:48:18 server hub 3-0:1.0: 2 ports detected Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Oct 14 08:48:18 server uhci_hcd 0000:00:10.2: UHCI Host Controller Oct 14 08:48:18 server uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 Oct 14 08:48:18 server uhci_hcd 0000:00:10.2: irq 10, io base 0x0000d880 Oct 14 08:48:18 server usb usb4: configuration #1 chosen from 1 choice Oct 14 08:48:18 server hub 4-0:1.0: USB hub found Oct 14 08:48:18 server hub 4-0:1.0: 2 ports detected Oct 14 08:48:18 server ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 Oct 14 08:48:18 server PCI: setting IRQ 3 as level-triggered Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 Oct 14 08:48:18 server uhci_hcd 0000:00:10.3: UHCI Host Controller Oct 14 08:48:18 server uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 Oct 14 08:48:18 server uhci_hcd 0000:00:10.3: irq 3, io base 0x0000d800 Oct 14 08:48:18 server usb usb5: configuration #1 chosen from 1 choice Oct 14 08:48:18 server hub 5-0:1.0: USB hub found Oct 14 08:48:18 server hub 5-0:1.0: 2 ports detected Oct 14 08:48:18 server Initializing USB Mass Storage driver... Oct 14 08:48:18 server usbcore: registered new interface driver usb-storage Oct 14 08:48:18 server USB Mass Storage support registered. Oct 14 08:48:18 server PNP: No PS/2 controller found. Probing ports directly. Oct 14 08:48:18 server serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 14 08:48:18 server serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 14 08:48:18 server mice: PS/2 mouse device common for all mice Oct 14 08:48:18 server input: PC Speaker as /class/input/input0 Oct 14 08:48:18 server ip_conntrack version 2.4 (4029 buckets, 32232 max) - 212 bytes per conntrack Oct 14 08:48:18 server TCP cubic registered Oct 14 08:48:18 server NET: Registered protocol family 1 Oct 14 08:48:18 server NET: Registered protocol family 17 Oct 14 08:48:18 server Using IPI Shortcut mode Oct 14 08:48:18 server ACPI: (supports S0 S1 S3 S4 S5) Oct 14 08:48:18 server Time: tsc clocksource has been installed. <snip> FS mount - dmesg </snip> Oct 14 08:48:18 server ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Oct 14 08:48:18 server 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Oct 14 08:48:18 server 0000:00:0c.0: 3Com PCI 3c905B Cyclone 100baseTx at e00c0800. <snip> FS mount - dmesg </snip> The dmesg when turning the drive on/of is already posted Spurious part: Oct 18 06:34:34 server xinetd[5919]: START: vmware-authd pid=19719 from=xx.xx.xx.xx Oct 18 06:34:34 server vmware-authd[19719]: login from xx.xx.xx.xx as aalderd Oct 18 06:34:35 server spurious 8259A interrupt: IRQ7. Oct 18 06:34:36 server xinetd[5919]: EXIT: vmware-authd status=0 pid=19719 duration=2(sec) Oct 18 06:34:52 server vmware-authd[19752]: The "/opt/vmware/server/lib/bin/vmware-vmx" process did not start properly. Exit 0x100 Oct 18 06:35:05 server vmware-authd[19766]: The "/opt/vmware/server/lib/bin/vmware-vmx" process did not start properly. Exit 0x100 Oct 18 06:36:23 server vmware-authd[19770]: The "/opt/vmware/server/lib/bin/vmware-vmx" process did not start properly. Exit 0x100 As you see it happened when I start a vmware-server-session. The vmware-server-session failed due the missed vmware-modules by the way. Aalderd On Wed, 2006-10-18 at 20:50 +0900, Tejun Heo wrote: > Aalderd Bouwman wrote: > > Hello Tejun, > > > > I now have received the message in dmesg: > > spurious 8259A interrupt: IRQ7. > > > > What does it mean? And is it a problem for the properly working of the > > system? > > Can you post full dmesg? > - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
